Norris

Fantastic work. Hope to see it at the bash

Does it do angled cuts? The G&W one isn't exactly cheap either

Ooh - nice slotting jig. Is that from G&W?

Well it's better than a hole. The price of the glue will have probably doubled its value

That sounds like a short circuit in your jack socket then. Probably the "hot" tip connector touching ground somewhere

I'd drill to the size of the shank, or just a tad over. A narrow hole will cause some wood displacement. Ignoring the threads, you are trying to put a 3mm metal rod into wood - something will have to give if the hole isn't large enough. You are then less likely to damage the wood that the thread bites into, which is where the compression strength comes from.

You've got some lovely curves going on

If you take your time, think things through and don't set yourself unrealistic deadlines anything is possible. I've been building my first guitar for over 18 months and would never have dreamed that I could produce what I have done so far. I'm currently lacquering it and am having to force myself to avoid rushing. It's a guitar so no build thread on here, but I promised Andyjr1515 that I'd post the finished photos on BC. The next build will be quicker now that I kinda know what I'm doing. You can do anything if you put your mind to it

A dab of clear nail varnish on the thread would stop it working loose if it IS the correct size. Use sparingly if you ever want to remove it again, and give it a day or two to cure - a little goes a long way when it's set. (Yep, good job my drop tuner is in tune, 'cos it's no longer a finger adjustment! )

Very nice!

I think you've maybe had no replies because mixing finish types is not usually done. I'm not an expert by any means but I seem to recall that shellac can be used as a buffer between poly and nitro. Prostheta would possibly know but doesn't drop by that often. I'll give him a heads up via other means and see if he can offer any advice

That doesn't look easy for a quick and cheap fix. You could try pushing it out using a stick with a cloth pad tied to the end. Maybe trim off a few bits that would prevent it pushing out with a sharp knife first. Then I'd probably lay it on a flat surface to push the dent out with the padded stick. Then some epoxy to hold it in place, carefully scraped down to leave a flat surface. Depends how quick and cheap you want. It would bear an obvious scar but would be better than a full "dentopsy"

That looks gorgeous and in no way a "budget" bass. Top drawer stuff!

I've kept my kit in the garage for years with no major issues. It helps if you're using it regularly to give it a chance to warm through now and again. Investing in a set of covers can also help

That's looking lovely! Nice work

I find that most tabs are wrong. It does make me wonder if the person has actually listened the bass line sometimes. They can be useful to give you some clues if you're in a hurry but are no substitute for your ears

45 inches?! Have you got very long arms or are you making an upright?

That looks lovely. Beautiful job

51 and reasonably fit. Our gigs go in fits and starts a bit as the guitarist is in a "name" band and tours occasionally. That suits me pretty well as I get a few weekends off every once in a while but am then itching to play when we get back together. We do think twice about doing 3 in a weekend these days though - the drummer is 65. I've recently taken up building guitars, which I find very rewarding and can chug along at my own pace. I've nearly finished my first one - 18 months so far That might be an option for a musically related hobby for you

So it's a double sided board then. If you notch it for clearance you will likely have to cut through one or more of those tracks. That means you'll need to solder jumper leads to re-make the connections. How are your soldering skills?!

Lovely! That sycamore is gorgeous

Ampeg BA-108. I bought one for my lad a few months ago. Plenty of poke for home and quieter gig use. No rattles, even on a low B

[quote name='blue' timestamp='1490560178' post='3266009'] I'm in the zero % chance of attracting a lady too. However last night or this morning when I got home, I received a friend request on Facebook from a young lady half my age that I recognized from being at our show. Can I get a "woop woop" ! 😁 Blue [/quote] Woop woop Blue! All I got last night was an offer from "Garry' to join an originals band that doesn't gig very much, scribbled on a note

My wife might come to one every couple of months. It's usually arranged amongst the WAGS themselves and only in the nicer venues we play. She knows she's always welcome to come along but doesn't feel like she has to. I was playing for years before I met her and she knows it's a big part of my life. There have been occasions where she would rather I wasn't out but understands that I've made a commitment when I accept a gig. It's never been a problem. Plus my band earnings have at times made up a significant part of our disposable income. She doesn't get jealous, especially now I'm an old git that has zero chance of pulling even if I was that way inclined

Very sensible. Industrial solvents are not to be taken lightly and should be used with extreme caution and using correct safety equipment. I did also wonder what effects they might have on a nylon shower curtain