Jump to content
Why become a member? ×

ped

Administrator
  • Posts

    14,604
  • Joined

  • Last visited

  • Days Won

    41

Everything posted by ped

  1. It's why metering is useful on compressors like the MXR, but you can tell by setting your desired ratio and backing off the gain until it does what sounds best, probably upping the output to match. I'm not familiar with the Keeley but they mostly act in the same way. More gain in = more immediate crossing of the threshold into the ratio you set. Time to play!
  2. Is this an input gain? You want to set the gain so that your bass sends enough signal to the compression circuit. Too low and the pedal won't do anything, too high and it'll squish too much. Once set you shouldn't need to adjust it again unless you switch instruments.
  3. ped

    NPD T-Rex Bass Juice

    Yeah I know what you mean, it sort of gives a bit of ‘hair’ that makes the bass almost ‘feel’ louder if that makes sense!
  4. Bought a pedal from Steve, flawless deal with super fast postage, thanks!
  5. ped

    Pedalboard qs

    I did wonder about that... the Mutron feet are quite chunky squares of rubber so I wonder if they'd fit into the gaps, and if the gaps would be spaced appropriately? I'll get the tape measure out. The Bassballs is less of a prob as the feet are detachable with screws.
  6. ped

    Pedalboard qs

    😆 you’d definitely know if a Mutron hit you in the head. Tbh I think you’d be in the big house on a manslaughter charge
  7. ped

    Pedalboard qs

    Thanks I did wonder about that but the pedals are really heavy so I’m not sure if trust it!
  8. ped

    Pedalboard qs

    Thanks mate yes that seems like the best option. I've nearly ordered a few times so glad I checked first! Hope you're doing well.
  9. Swing and a miss for me; it would be quite tasty if the neck was more sunk into the body. Sort of like a J to the mustang’s P.
  10. I must admit that I find a phase switch really useful (on my Valco KGB fuzz pedal) - seems to be something the LS2 is missing?
  11. ...and when you spend 5 mins on BC!
  12. Hi Marc, very well thanks, you too I hope? I'm afraid I sold my cakes a while back so I'm unable to answer this question but someone here will still have them. If you can't plug more than one thing in at once you can chain cakes together. Cheers
  13. These are nice.. shame you're not closer!
  14. I treat each bass I've had as an experience which I am able to upload to my internal library of tone knowledge, and that helps me appreciate my next purchase and judge whether I want to keep it or not. At the same time I'm mindful about rose tinted spectacles and every bass I've sold has been for a reason. Sometimes I think I'd really like to play the Smith basses I sold, but then I remember why I sold them and can now better appreciate the qualities they offered which I did like in my next bass. Also - if you sell something and really regret it, then you more often than not have the fun of searching for another, safer in the knowledge that you're going to like it (instrument variances aside). Basically what @Beedster said. And that's how you end up with a hodgepodge mutilated vintage mustang, which anyone who plays it will know is the embodiment of everything that's good 😄
  15. I have one of these, it's really nice and UK made https://www.swiftpedals.co.uk/loopers.html
  16. In the past I’ve used Dymo label tape to cover poles. It’s stronger, and removes without mess.
  17. Indeed I can, it’s a Mustang bass with a thunderbird pickup in the neck position and a rickenbacker pickup at the bridge. It’s what Fender would have called it 😂
  18. ped

    Pedalboard qs

    Hi folks I'm thinking about getting a pedalboard for a handful of effects now that I have a regular 'gig' and I want to avoid using velcro. That leaves me with either Aclam 'clamps' or Temple Audio base screws. Both look fine but I'm wondering how well they'd work with a pedal which has 'feet' so that the base of the pedal isn't flush with the board. For example my Mutron has quite big feet which lift it about 1cm. I don't want to remove them (they're glued on). The clamps on the Aclam look like they'd be a bit small to grab enough of the pedal, and the base unit on the Temple Audio doesn't look like it has any travel to allow the baseplate to be anything but flush with the board itself. Is that right? Does anyone have either and can confirm? Cheers
  19. This thread has too much Tennents and not enough flats
×
×
  • Create New...