beastie

got the naddy system £77 will let you know how i get on

Thanks all for the info at least i have some where to start i will be useing it with my gb so i need to test it out so that i dont loss that gb sound yet again i just shows what a great site this is hats off to you all Gary

Hi, Lokking at getting a wireless system does anyone have any reconmendations for make and specs and pricess as i dont know where start i have read the various forum links on wireless but there dont seem to be any recomended makes and models REGARDS Gary

thanks for the info i am going to look at a pair of GS12 4 OHM CABS on saturday Iam going to run them with my ashdown abm evo11 900 head as the cabs are rated at 600w each with my gb bass hoping to get a nice full sound with no distortion I have been told the cabs sound a lot better with won of the AGUILUR amps as the are tuned to work with the cabs i hope my gb can help out in this department

[quote name='Clockworkwar' post='412894' date='Feb 18 2009, 11:57 AM']It's ok if you can drive there, if you have to post it that's where the cost comes from. I don't have any relatives down there either.[/quote] I understand the post issuses but for pease off mind i would send it to Ashdown

any one know anything about the Aguilar GS 2X12 CABS

just had my HEAD REPAIRED at ashdownn abm evo11 900 as they are only 30 mins from me i took it there myself i watched russell one of the techs and a bass player at work found the fault and then tested the amp £28 i have had a another abm head serviced at ashdown full service in which the amp was stripped down to a empty shell each part tested and cleaned four new trim pots replaced and then tested on the bench and in there sound booth £78 must inportant is that they have all the genuiane parts in stock and if it is a earley ashdown one of the techs at chelmsford would made it and it will come out off the service with the amp like new Gary

Amp fixed by Russell at ashdown It was the circuit board for the send and return on the effects loop on the back off the amp new one fitted and amp tested for £28

[quote name='beastie' post='397719' date='Feb 2 2009, 11:51 AM']thats the proplem dont no what it is the mute button seems to work fine[/quote] Had a reply from Russell at Ashdown he has booked it in for repair friday he reckons its nothing to serious worst case £60 i will keep you informed for futre referance

[quote name='Pookus' post='397676' date='Feb 2 2009, 11:14 AM']Could be a problem with the mute button?[/quote] thats the proplem dont no what it is the mute button seems to work fine

[quote name='Machines' post='397634' date='Feb 2 2009, 10:37 AM']Is it in warranty ? Even if not i'd contact Ashdown for them to try and diagnose the problem.[/quote] Thanks for the reply i have sent an email to mark at ashdown they are only 30min from me at chelmsford i have been over there once before very good service

[quote name='Hamster' post='397421' date='Feb 1 2009, 11:56 PM']Have you connected too low a load and blown the power section?[/quote] my cabs are are 4x10 at 4ohm and a 1x15 at 8 ohm one is connected to the right channell and the other to the left i was told by ashdown this will be ok but dont link them to the same channell which i have never done

I have a proplem with my amp no volume unless turned up fully and then its as quite as a mouse and the sound is distorted the speaker cabs are ok and the batteries in my gb are fine any i dea whats wrong

[quote name='bassmansky' post='337527' date='Nov 26 2008, 06:04 PM']hi,is the speaker youre replacing any good or is it knackerd? im looking for a 300w 15".[/quote] speaker is brand new and in good working order

[quote name='Protium' post='337514' date='Nov 26 2008, 05:51 PM']OK you might be running at full power but if the speaker can't handle the excursion it's wasted anyway. I'd try looking for a more efficient driver (at least 100dB) with a higher Xmax regardless whether its 4ohm or 8ohm.[/quote] thanks for the reply any recomendations

[quote name='beastie' post='337493' date='Nov 26 2008, 05:23 PM']thanks alex the proplem i am trying to overcome is the differance in ohms in the two cabs as the other cab is the asdown abm 410t 650w and is rated at 4 ohms it is used with the asdown evo11 575+575 to get the maximum power from the amp as you will know i need to run both cabs at the same ohms or do you think that it wont make that much differance the amp will only be used at max half power its quality not quanterty i need[/quote] thanks for your recomendations i have also sent an email to ashdown to see what they have to say gary

[quote name='alexclaber' post='337113' date='Nov 26 2008, 11:40 AM']The thermal power handling rating is one of the least significant specs and there are very few 15" speakers available in 4 ohm nominal impedance - you're better getting a better 8 ohm model than a compromised 4 ohm one purely to gain a few watts from your amp that you speaker is unlikely to have the excursion to handle. If you're willing to spend the money you can't really beat the Kappalite 3015 as a standalone 15". Alex[/quote] thanks alex the proplem i am trying to overcome is the differance in ohms in the two cabs as the other cab is the asdown abm 410t 650w and is rated at 4 ohms it is used with the asdown evo11 575+575 to get the maximum power from the amp as you will know i need to run both cabs at the same ohms or do you think that it wont make that much differance the amp will only be used at max half power its quality not quanterty i need

[quote name='harlowbassplayer' post='336904' date='Nov 26 2008, 01:43 AM']i have a ashdown cab without a head it is 1X15 tho if you make an offer[/quote] Thanks for the offer but i already have the cab just want to change the speaker in it

Hi i have an ashdown abm 1x15 speaker cab rated at 300 watts at 8ohms i want to replace the speaker in the cab with a good quility 1x15 500w+ 4 ohm speaker can any one recomend a speaker and also if the cab can take the increase off power Regards