Dazed

Love the Zoid shape and have come close to owning one several times. Also a fan of some of the headless versions. I’m sure I’m not imagining it but I found a 32” 5 or 6 string last year possibly headless with the movable pickup system. Should have 🤦🏻‍♂️ Not so keen on the finish of the Pasini’s so far. They’re a bit busy for me. However it’s good to see ongoing development of the brand and not getting stuck in the same place.

Apologies if slightly off topic - seems to have turned towards MK’s various basses over the years - and my q relates to this. Anyone come across clips of him ever playing the Pangbourne live? Always loved the look of that bass but only watched him on stage with Jaydee / Alembic / Status over the years.

It’s showing £1400 at the hammer

I have a TRB 6ii , just a thought, were these pickups and electronics used in any other of the models? TRBX / RBX etc. The pickups each have a pot on the preamp board that takes the pickup from single coil mode to humbucker which although subtle is audible. The pre is active only, treble mid and bass pots, master volume and a balance pot, but I believe you can add a passive switch. The pickups look like the ones fitted in the pic posted above by Machines of the red RBX765.

The model is usually stamped on the head front or back, the ii models seem to have it on the back. The ii is a bolt on and as Andy mentioned don’t have the scallops - which aren’t the same as the slap cut on the JP models. as the slap cut . Although saying that there were several productions of them so there may be the odd anomaly. Helpful no? 😂 I think the original TRB 5 also had a split neck pickup whereas the later ii had soapbar shaped pickups. Bass direct have a TRB 5ii and a TRB 5P (piezo) in stock so you can see the differences https://www.bassdirect.co.uk/bass_guitar_specialists/Yamaha_TRB_5_II.html https://www.bassdirect.co.uk/bass_guitar_specialists/Yamaha_TRB_5P.html

💥 There goes the 2nd hand values again

Yeah it’s a prose. I recognised the body shape from one I have. Was watching that on eBay. Congratulations!

Great thread @funkle Enjoyed reading your updates and what effects minor changes and tweaks have on what appears to be a simple addition. Goes to show there’s a lot more than meets the eye even on a simple passive p bass. A reminder that custom instruments really are a bit of a shot in the dark!

Is that Mitch??

I know what you mean. Haven’t found or ever come across such a pickup, that senses across a large area. Maybe because you’d end up with an approximation of the sound, or the magnet would be so long it could cause string pull etc. There’s probably a very good reason for it?

Then there’s the Atlansia Pegasus and some of their other “out there“ designs.

@Jus Lukin Enfield Cannon? https://www.sims.guitars/enfield-guitars/cannon @KiOgon Warwick did something along those lines with Guy Pratt In action here Wood & Tronics do something similar with a single Jazz pickup under a wooden cover that slides to 4 preset positions.

I can’t be the first to notice this isn’t his Musicman bass but the “whatever brand bass” from years back he used on some of the early recordings.

I don’t know how true this is .... take it as you would if you overheard a conversation in a pub, I was on talkbass earlier and seem to recall reading someone mentioned that Aero made replacement TRB 6 replacement pickups. i guess it’s possible they do a drop in for a 5 string as well? Alternately and again for a 6 string TRB - which also don’t have a direct replacement available - someone had used an Emg standard size which left a gap at either end of the pickup but they had 3D printed some black “ears” to neatly fill the spaces.

Either way it’s madness 😂

That’s crossed my mind too, shortening the existing neck. Again would the headstock be able to be reattached ? I’ve just been reading through the build thread of your headless, awesome! I’m very interested to hear what the triple Sims pickup setup sounds like and if it’s worth the outlay? It’s something I’ve been mulling over recently and was amazed someone else had already done it!

It wouldn’t need new body wings or a new body. Hypothetically the body would slide 2” along the existing neck through block and crudely put the excess overhang of the block would be chopped off. I get your point though it’s an awful lot of work.

Sure that’s what I meant by refret, but to the shorter scale.... I’ll add filling the existing fret slots to the list of jobs

I’ve also been thinking about this with a Streamer Stage 1 5 string as well. Have you measured the Nordstrands ? Are they a straight swap over?

Often seen tape covering exposed poles to overcome the clicks.