Thornybank

Yep EA 4x10 + Horn as new Neo liteness, portable-ific compactivity, EA thumpiness Side handles Trolley handle £650 delivered = half new cost, if you can find one. p/x entertained [attachment=22026:small_nl410.jpg] [attachment=22027:ea800cabhandle.jpg] [attachment=22028:ea800cabrear.jpg]

Maybe shifting the EA 4x10 with horn, as I have 5 other 4x10s anyway... It's as small and light as.... Wheels and side handles and extendo trolley thingmie and allsorts. Kinda eeksie value, tho', so not a cash generator.

Hmmmm..... [url="http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150329052662"]http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...em=150329052662[/url] [attachment=21436:375.jpg] Went for £1k+ with 3 bidders over £850. I have a superclean one that hasn't done anything for many moons. If someone is seriously interested, I would propose to send it to Marshall for a total 'suss and sort (may need nowt, anyway) and punt it to them with the Marshall service warranty attached. Pennies would be agreed after Marshall give an estimate to take into account who pays which bits (carriage to/fro, any repair cost). Right to refuse would prevail based on the estimate, but I wouldn't propose to get the estimate until intent and ability to pay have been established. Anyone intrigued - or know one of the bidders who might be?

Consider swop for a Trace 2x15? Green carpet, size of a 4x12 = not too deep/awkward/heavy. Part of my V6 stack - when I had one. Metal grill under the cloth = protected drivers. Very clean.

410 with horn and the SMX preamp. £300? Own it, friend.... Then the seller can buy my 200w USA Ampeg B210 for £275....

Pics [attachment=21054:25_02_09_1556.jpg] [attachment=21055:25_02_09_1557.jpg] [attachment=21056:25_02_09_1558.jpg] [attachment=21057:25_02_09_1558.jpg] [attachment=21058:25_02_09_1559.jpg] [attachment=21059:25_02_09_1600.jpg] 4u suspension case: transport upright, then pull the top and wheels at the gig. BSH Transit Cases made in Manchester. Clean inside. Good rigid foam where it is needed. Wooden internal mounting frame with sturdy foam shock damping. Loads o' room for stuff: leads, pedals. Great wheelz. No clasp or handle issues. Wooden skid rails on one side/the bottom Vents on both sides and top. Current price on this spec is £250+VAT. Yours for £135 delivered. Had a comment on the rust and bloom on the steel fittings. These are purely cosmetic. The butterflies are free adn smooth, there is no trace of damp or stink. All the foam is fine.

He says he would have to see the hernia before he says yes. Any photos?

Powerhouse rig when fully happening. 200w full range, 400w biamp. An all-time favourite cab. Worth the lift. This is nowt for a rock gig rig!

Rickenbacker 360/6 Mapleglo [attachment=20994:360Front.jpg] [attachment=20995:360Back.jpg]

Intristin', that. There are some basic procedures for which the NHS have a long waiting list and they tie up lots of resource for basically in-and-out ops. So... there are courses to train opthalmic opticians to do teh procedures, adapt their premises, get a nurse on board and turn these around. He already has state of the art retinal scanning kit and software, and has saved a good few eyesights where GPs and geriatric visitors have missed pressure build up from diabetes, and early onset galucoma cases. Unfortunately, the NHS is not fronting for the training.

Move it on up....

I can see where you are coming from.

Well, that's what he tells his patients!

'course he does....

V8 + 4x10 pics now in an Amps listing

Weight isn't bad, akshully. No more than the Rumble head or an SVT Classic. I always handled it gently because big bottles cost. I don' think Ross moved it more than five times since he bought it. I know he gigged it once and he shifted it in his house when he sold the 8x10.

The serial photo was blurred. T0136/79/201 Mean anything?

Some pics added at t'top. More can be taken if serious interest expressed...

My optometrist is paying for an opthalmic surgery course, so his prid and joy is on the block if it can generate a good (for him) price. £300 for a 400w 8ohm 4x10+horn with stove enamel grill and matching V-type style logo. Some vinyl cahllenges, as the covering is soft and the V8 wot used to perch there isn't light... (Flight case available from me) [attachment=20927:V8_STACK.jpg] [attachment=20928:V8_STACK_BACK.jpg] [attachment=20935:V_SERIES_410.jpg] [attachment=20933:CAB_PLATE.jpg] [attachment=20934:CAB_VINYL_WEAR.jpg]

Some quick shots of the JV P. Serial is JV69139 Serious enquiries will motivate more/better. [attachment=20726:jv_logo.jpg] [attachment=20727:jv_front.jpg] [attachment=20728:jv_neck.jpg] [attachment=20729:JV_back.jpg] [attachment=20730:jv_tuners.jpg] [attachment=20731:jv_neck_dink_1.jpg] [attachment=20732:jv_neck_dink_2.jpg] [attachment=20733:jv_neck_dink_3.jpg] [attachment=20734:jv_front_dent.jpg]

It is in good nick. Does what it does EBS-ly. Swaps preferred, but will sell.

Yep - a guitar pedal, really. I love mine.

Wattage? Ohmage? Youth wants to know....