whoizitcc69

Hey Bassmonkey, Chris Here from Mutant Mics.. I see you are trying to get your lights working.. and I can tell you for certain the guy who posted the Schematics of the red and black mic, His design will work the lights but it will mess up the polar pattern and destroy the element over a year or so.. without going into detail and giving away too many secrets to my design.. remember that the coil in this mic has a very strong magnet.. and if you coil wires in series around a piece of metal and add DC current of the phantom power, You will basically make a electronic magnet by itself.. the current going around the mic element in series does just that. It will drain, and throw the polar pattern of the element off and trade electons and eventually drain the magnet or change the polarity.. although it may work for a short time once the element gets some time on it, it will fail like a fuse.. I told the guy who posted it the same thing and he did not listen... but he did add if it causes mic failure its not his fault.. My design is flawless and tested.. yes I charge 55.00 to wire a mic for lights, but I also warranty my stuff.. If you don't believe what I say about the mic.. take a nail and wrap a wire around it.. put 48V battery on it , positive on one side and negative on the other and watch it become a magnet itself.. Put two magnets together in one case and it will throw its pattern off and cause it to fail over time.. Just simple science.. I would hate to see you mess up your mic....