Jump to content
Why become a member? ×

slobluesine

Member
 View Profile  See their activity

  • Posts

    929

  • Joined

  • Last visited

 Content Type 

Everything posted by slobluesine

  1. slobluesine
    was it a Seymour Duncan?
  2. slobluesine
    bugga!!! i bought the pup form a BCer some time ago as new and i've only just connected it so dont know how i stand warrany/refund wise
  3. slobluesine
    tried that......... nothin
  4. slobluesine
    i only have x1K ohms, and i get nothing on that
  5. slobluesine
    Hi Sid, only just finished the bass and wired the SD up but i get nothing? when and where did you get the Antiquity? john
  6. slobluesine
    seymour duncan antiquity straight out of the box and i'm getting nothing? my basic meter only goes 10-500 DC, and i get nothing on that either. new pup? better meter? any suggestions?
  7. slobluesine
    [quote name='Rick's Fine '52' timestamp='1341936739' post='1726541'] They sure are, it's a steal. Not a great time to be selling! [/quote] I KNOW! it's BOGOF if only i had some cash.....
  8. slobluesine
    someones gonna get a real bargain here, not gonna be me unfortunately
  9. slobluesine
    pack it in fer christs sake Rick, jeez....
  10. slobluesine
    it's off to Ian at Guitar Works, just down the road from me, thx for your replies folks, and remember...... "all Fenders are NOT the same"
  11. slobluesine
    i've been trying to convince Phil the pocket is too shallow on this since i got it, i know he will fix it but it's the frig of sending it back and i'll probably have to spray the pocket edges and i havn't got any butterscotch left and i wanna plug the thing in. plus despite months of discussing the project he originally sent me a Jazz body
  12. slobluesine
    [quote name='Johnston' timestamp='1341677028' post='1722667'] My Dirnt has the Crown of the Fretboard 9mm above the scratch plate. Plate is 3ply. So whats that 12MM from body to highest point of the Fretboard or there abouts? [/quote] how much is left under the pocket? and how deep is the pocket?
  13. slobluesine
    [quote name='lettsguitars' timestamp='1341677106' post='1722669'] I'm sure Phil would put it 'right' for you if you ask nicely. If not let me know coz he's a friend of the family. [/quote] Phil say's the body is correct
  14. slobluesine
    i'm thinking an all parts neck must be right, the Guitarbuild body has 28mm left under the pocket, any know if that's right?
  15. slobluesine
    that's what i think, so.... how come people are telling me its ok. Neck is 25mm at heel, pocket is 15mm so neck is 10mm proud, all correct apparently
  16. slobluesine
    i started the thread here with a pic... [url="http://basschat.co.uk/topic/180895-early-50s-p-bass-neck-pocket/"]http://basschat.co.uk/topic/180895-early-50s-p-bass-neck-pocket/[/url]
  17. slobluesine
    it's an all parts neck
  18. slobluesine
    yep, i dont think the pocket is deep enough, but i'm assured by Phil at guitarbuild that it is Neck is 25mm at heel, pocket is 15mm so neck is 10mm proud, anyone know if this is right/wrong?
  19. slobluesine
    this is new build so no shims to be seen, cant believe a neck won't bow with zero tension on the truss rod, hmmmnnnn....
  20. slobluesine
    i have a new maple neck on a P bass but cannot get the strings off the fretboard, neck is dead straight, truss rod is almost loose, and bridge saddles are high as they can go. how do i get some relief into a new neck? does it take a while with anew neck?
  21. slobluesine
    i cant seem to get any relief in this neck and the truss rod is as slack as it can go, i need some bow in it, does it take a while after stringing?
  22. slobluesine
    with the pickguard on it's almost halfway, but how come i cant get the strings off the fingerboard with the saddles as high as they will go and the truss rod almost loose? maybe need some shims?
  23. slobluesine
    it's an all parts neck and guitarbuild body, surely they should fit? neck is 25mm at the heel, pocket is 15mm so neck is 10mm proud, can anyone confirm this is right/wrong?
  24. slobluesine
    does this neck look at natts too high [attachment=112333:IMAG0383.jpg] bridge saddle screws are half way into the saddles too
  25. slobluesine
    i'm thinking the jack is Jap, so i need to get a US one to fit the new socket right? anyone got one spare?
×
×
  • Create New...