Jump to content
Why become a member? ×

Al Krow

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    14,973

  • Joined

  • Last visited

  • Days Won

    10

 Content Type 

Everything posted by Al Krow

  1. Al Krow
    In terms of eliminating feedback there seems to be a consensus that cutting the pre EQ input gain on the desk is better than cutting the post EQ faders vol. Is that the correct approach? If so, what's the thinking behind it given the volume per channel ends up being the same ?
  2. Al Krow
    It's certainly a good value bit of kit. Are you using it with IEMs? We found ours fine with wired IEMs but unusable with our Xvive wireless IEMs due to the lack if shielding from the relatively cheap plastic casing. We subsequently swapped to Soundcraft MTK12 which works well, is multitrack and still decent value.
  3. Al Krow
    But fine if the punters' bodies are between?
  4. Al Krow

    Zoom B2 Four

    Al Krow replied to MarshallBTB's topic in Effects

    Worth mentioning to Thomann? I think @BigRedX has previously said it's a legal obligation to supply a UK adaptor?
  5. Al Krow
    Wot Sam said 😊 And overall more "realistic" sounds / better pitch shifting. But the nuances may not matter a great deal in a live band mix to anyone but ourselves. Will be much more noticeable in a home or studio environment when you're not competing with a drummer and guitarist. And even with whatever processing power, few multis can yet still do as decent a filter or synth sound comparable to dedicated pedals. Bear in mind your full fat Helix has double the chip set and processing power of the Stomp (or HX Effects). It shouldn't therefore run into the same processor power limitations that @Jack was referring to.
  6. Al Krow
    If processing power is an issue, then maybe have a think about the Boss GT1000 Core as an alternative? The Stomp chipset is almost 9 years old now and getting a little long in the tooth compared to some of its rivals. That's not a criticism that can be levelled at the software patches available for the Stomp though!
  7. Al Krow
    I found the Lekato noticeably noisier i.e. it introduced a slightly gritty/dirty tone with a couple of my basses. Tbf I would say the Boss WL-20 was even cleaner than either (comparable to a cable). The Nux has excellent range - I've wandered 20m+ to the back of a couple of venues we've played at mid-set with no drop-outs. The Lekato may be able to match - but I never got as far as testing for this.
  8. Al Krow
    So how about using the filter on its own without the compressor at all? How does that sound?
  9. Al Krow
    Haha there are several, right? eg Boss ES5? But personally I'm content in a live band mix to get something that works well. I appreciate for studio work you would likely want to get something more refined and honed.
  10. Al Krow
    Agreed - which ties into the school of thought that says give the filter pedal the most complex input signal you can to filter i.e. pretty much at the end of the signal chain. In which case you would then put your compressor or limiter (to tame unwanted spikes) after it, if you're using one.
  11. Al Krow
    That pretty much exactly summarises my journey, too. Except I went one step further and got a set of Nux 5.8 Ghz wireless having tried the Lekato - the Nux are more on a par with the Boss in terms of both price and quality IMO.
  12. Al Krow
    @Jakester "I have a pedalboard setup that I'm happy with" I think you've answered your question 😊 If, however, you fancy spending a lot of time getting up to speed on a multi-fx and tweaking it so that it gets close to your dedicated pedals with your specific rig, so that you're equally happy with your Stomp well that's an entirely different matter - crack on!
  13. Al Krow
    Well if it's good enough for Mohini Dey 😁...apparently one of just two pedals on her board she has gone and bought herself. The rest were given to her. Maybe a smart move for Andras to pop a V4 in the post to her along with your manual and get her to record a demo for you? Just a thought!
  14. Al Krow
    Turns out that Mohini Dey is a bit of an FI fan!
  15. Al Krow
    That's another thumbs up for this new A&H range and a cumulative GAS leak into our collective consciousness! Being digital can you can tailor whatever fx you want to each channel? Unlike a lot of analogue desks where the fx choice is global and either apply it or not is then the only option, so ends up being reverb for vox and off for the rest of the band. Please talk us through the key benefits of the Double Tracker for your set up?
  16. Al Krow
    That's the one! Simon's in-depth knowledge about compression is pretty much unrivalled.
  17. Al Krow
    Out of interest, which parameters would you look to control on drive and EQ? Just checked my three fuzz pedals and none of them have expression input options. One of my two filter pedals does (but not the other).
  18. Al Krow
    Hi Jeff - 18mm spacing (with individual bridge saddles). I think it was made in Taiwan.
  19. Al Krow
    Seriously tasty Spector, Lee!
  20. Al Krow
    He does go on (and on!) about where to put this pedal in the chain - overthinking things, lol! But finally says something useful at 2.40 when he comments "currently, as far as the actual models themselves go, I'm a lot more impressed with this than I was the MS-50G" So to answer his question, I'd maybe suggest that's why this pedal exists 😅
  21. Al Krow
    If the new '+' models have an upgraded chip set, that extra DSP is going to win through in the end. There's been very few times when older processing related hardware has held it's own against more modern kit.
  22. Al Krow
    Yamaha BB2005 - really loved this bass and it's the most weight-balanced of any in my herd, with zero neck dive, which makes it very comfortable to play. Lovely natural finish which shows off the layered neck through construction. In really good condition, given it's age. 34" scale 24 frets 3 band EQ, vol and pick up knobs, active / passive switch 4.5kg / 9.9lbs Pre-amp recently upgraded with a new Aguilar OBP-3 to provide full 3 band EQ and has been set up to reassign the old NE1 switch to be an active/passive switch for peace of mind during gigs. As part of having this fitted, the bass was professionally set up with new strings and fret dressed. The Yamaha stock pre-amp (which was mid-cut only) will be included with the bass. Has not been getting too much use from me this passed 12 months so I'm thinking it's time to move it on.
  23. Al Krow
    Does the 70CDR crack the filter and synth sounds that e.g. Helix struggles with, and does more on that score than the MS-60B? If so, definitely be worth checking out the 70CDR+ ! I've never been too fussed about bass amp / cab sims - a decent EQ set up gets me most of the way there on that score.
  24. Al Krow
    Is there any difference in the pitch they are centred on for tracking purposes? I know with the Boss OC-5 octaver and Boss SY-1 synth (but interestingly not the Boss SY-200) pedals have a bass/guitar selector switch to optimise the pedal for whichever you're playing.
  25. Al Krow
    That's a chunky price - hoping it will be closer to around £130 when the MS-60B+ lands here in the UK.
×
×
  • Create New...