Al Krow

That's lovely (the vintage white fireplace I'm referring to of course but the Ric ain't too shabby either!) Gotta admit Rics are the basses I've never quite summoned the courage to get, although I did REALLY liked one which I tried in a store a couple of years back - seemed to put the competition I tried out that day (mainly Laklands which I know a lot of folk really rate) to shame. Then I thought I was safe 'cos I moved onto 5ers, but they've caught up with me on that score. Just (exorbitant) price and weird diamond shaped pups now stand in my way of a Famous 5 Ricadventure. PS and oh btw if you fancy uploading a clip of that Ric + dUg sound you're loving, I'm sure it won't be the least helpful on the GAS score for any of us.

Weird thing is that my Tech21 Red Ripper seems to have made a miraculous return to full health. Probably 'cos it shares a human fear of going to the dentist...😁 Been advised by fellow BC'ers that its likely to have been a bit of dust in the works and best thing is to give the circuit a bit of an air clean with some canned air. I'll give that a try if it has a mopey day again.

Yup - fair cop on that point. I'll edit my post above accordingly.

You need to bear in mind that some folk don't have time or inclination to wade through 70 pages of manual to spot a glitch! Personally I think something like this should be spelt out on the page dealing with uprating the firmware to 3.00, that would seem the obvious place rather than buried in a footnote on page 14? I certainly wouldn't have spotted this other than the fact that it came up on another unrelated thread. Just one further point for the manual for the next update. On page 13 you are advising to turn the PARAMETER dial to "Note Off Level" to get to "tBS". Fine so far, but we're left hanging there and actually need to move the dial back to "Note On Level" to identify and edit the note frequency. Maybe an obvious thing but if you are "RTFM" then you expect the manual to give you the right order of steps when correcting a glitch. All good though Peter, you've done an amazing job on updating the manual which is a zillion times better than the original. And as with any product updates - just take the feedback that's coming through and include any useful or recurring points in the next update of the manual.

Oooh that Octavider+ sounds good, but will likely have a price tag to match!

One point that is not immediately obvious, but came up on another thread, is the following which is hidden in page 14 (of 70) of the manual: "If you update your FI's firmware to 3.00 from an older version...then the tune base will not be at 440...You must reset the tune base" (otherwise the tuner is out). No idea why no one thought to make A = 440Hz the automatic reset on updating the firmware, but it is what it is. How to reset things are set out at page 13 of the manual.

Good man Yup that was the red card hint a few posts ago. I guess we could in theory widen this thread to guitars, keyboards, band outfits...band pets...but please let's not (although if @bassfan wants to include his pet, he has a dispensation) 😁 (PS @ezbass @BassAgent - those are some really cool six strings you've got!)

+ bear in mind postage on top

@ezbass or should that now be ezguitar? Just one thing to say to you:

Out of interest why doesn't it default to A = 440Hz post v3 upgrade? You'd have thought that would be a pretty obvious thing to do.

Aha! That makes sense. Do you have to go online to reset it? I guess we should really be having this discussion on the FI thread... apologies to the OP! Lol, just checked, you're the OP! 😎

Appreciate that this is a bit of thread derail, although it's hopefully in the spirit of what we're sharing, but if any of you also posted on last year's thread, it would be really interesting to hear whether you kept your nominations from 12 month's ago? Given the churn in kit I've had over the past couple of years, I must admit I was really chuffed to read my OP from last year and see that my fav purchase then and the two runners up (all basses) have sailed through 2019 and look set to remain for a while yet. I guess there's hope for me yet Now if I had to decide whether my fav from this year matches my fav from last year, that's gonna be a really tricky one and I'll probably need to "do a @Merton" and sleep on it. Probably for about six months in my case 😁

When you're using the tuner, you'll see three dash levels to the side of a particular note: high dash, mid (in tune), and low. I'm referring to the difference in these dashes as a "notch". And when I'm playing a single note (particularly a low B) the level ducks and dives like a pro boxer. Much more stable on my Zoom B1-4. You not getting any of this on yours?

Nice!

Of course 😉 PS is that what your disguise is for, so that no one works out it's you? Smart move.

In your case, are you sure you're in the right band? In my case, believe me, it's not being the bass player that stops me getting laid... ...oh and @Merton that bass of yours (or at least the bit you've so far revealed) is a real looker. Is this the BC equivalent of strip-tease?

It's not this one by Squier with a new balck bridge and a black painted fretboard but with inlays, by any chance? I've been reliably informed by (many many) BC'ers that you can do anything with a Squier 😁

But without a pic she is only words... 😁 (and I haven't forgotten about you either @Merton 😂)

These Valeton boys do make some ridiculously good value pedals and, based on our collective experience to date, reliable gear. I know very little about these guys. I think the only (and large) clue is that the website offers alternatives of English and Simplified Chinese, and China is where I believe their design and production both take place. But, hey, if it's manufactured in the same country that they make Apple iPhones (and my Washburn HB-35) that's good enough for me!

Hah! You having a second bite at the apple already Dave?! I guess that first pic completely entitles you to...

Hey Peter, given that you are finding the FI to work well as a tuner, I've investigated this in a bit more depth to make sure I'm not speaking out of turn! This is what I found: My Zoom B1-4 was consistent with the tuning on this YouTube tuner which I selected at random, and the strings were also then internally consistent (i.e. 5th fret E = A etc) - although I appreciate such consistency is dependent on the bass being set up properly in the first place. Applying the same test to the FI tuner, I found that the FI tuned things a notch flat on the G, D, A, E strings and two notches flat on the B string i.e. an in-tune B string using the YouTube tuner and my B1-4 is showing as a one notch flat C note on the FI i.e.the FI is registering something that is in-tune as being #, and something in-tune on the FI would therefore show up as flat on my Zoom B1-4 (and by extension this YouTube tuner).

Here's me at the back pretending to be cool...

Aww that's a shame - looks like a cool outfit. You guys got any material uploaded on YouTube?

I'm guessing if these both work then the Valeton EP-2 should also work, and it has a very small footprint. @AxelF I have a vgc EP2 I'm going to be moving on at some point, as I'm thinking of getting a bigger footprint / more high end pedal (something like one of the Mission Engineering ones). If you might like to nab mine before I put it on the FS, please PM me.

Wow, I'm intrigued as to what it is about the ACG (which looks lush btw!) that has resulted in your Wal being put out to pasture? What's the spec on it in terms of pups and preamp?