Joebethell

I didn't think this day would come but I have decided to part with my Guild Starfire I have had a bad couple of months culminating in badly broken ankle so needs must. I am starting to get a bit more mobile now it's been a month since my surgery I would still prefer collection but I'm willing to consider shipping at cost and with the risks fully insured if required. I will still be unable to drive for a while yet so I cannot deliver currently. This is a USA Westerly made Guild from the late 90s not a Newark reissue. These guilds were limited in numbers and I have only seen a handful available for sale. The guild website link states they have gaps in serial number date but Starfire 4 (do not list a Starfire II) in 1996 end at AG000219 and Starfire II start in 1997 at AG300001 so my guess would be late 1996 but I cannot prove this. The bass is in amazing condition just some slight pitting/tarnishing on hardware no dents or big marks just some light scratches and tiny marks (I would say near mint for a 30yesr old bass) most I have seen for sale have damage at the jack socket but not on my bass. It's a semi hollow flame maple body,sides and back with a mahogany/maple/mahogany neck short 30 3/4" scale. Grover tuners, metal saddle bridge and Guild pickups. I will say it's not a light bass but on a wide leather strap is perfectly manageable. Comes with its case one key,hang tag and book. My kettle still works if you want to come try the bass. I'm assuming I have priced this to high so will bring it down to £1900 is the lowest I will go as I would rather keep it it's a really great bass. I would be open to a cheaper short scale bass or medium scale (might consider a Pbass but that would have to be a slim neck) as a part exchange and I would also consider a rick 4001/4003. please get In touch for more details or anything really.

Hi should be on the listing Thanks Joe

Yep I had it on basschat before then I tried eBay even had it sold on eBay but no contact from buyer at all so gave up after pestering so I have returned to trying basschat again as seem to have better luck due to the nice folk on here 👍

Custom Zoot Funkmeister 5string. This is a Zoot custom Bass built by Mike Walsh as a 5string active superJ with a solid black finish since my ownership this bass was sent back to be extensively worked on by Mike and turned into the bass as you see it now but again with my band no longer in the frame and me reaching for short scales first this is another on the list of gear to go as it is not getting used. The Bass is now a passive 5 string with Australian Jarra top Tbird custom pickups with V/V/T and push pull pots for coil options on both pickups think mike lull and your close to what this bass can do as it was inspired by my old PT5 but with a 34” scale, 20fret maple neck with 16.5mm spacing,hipshot ultralight tuners in black along with all the hardware and a really dark cherry burst type finish (difficult to picture but has a really nice depth) Weight is 10.3lbs and the nut width is 45mm. Few marks on the back bass has been gigged but in great condition comes with a well used hiscox (Zoot branded outside is near mint but the interior foam has started to come away) hard case. Collection preferred. Any questions feel free to ask open to offers not looking for trades currently. £615 as could do with the space and have a small cab on route.

Having a clear out. Postage included Really useful box can be used as a DI, attenuator to cut the overall volume on stage or so you can drive the amp harder at lower volume or a load box for a 100w 4ohm amp. Hardly used will post for asking price. Everything that makes a real amp rule over all the other alternatives is retained. You can even record silently late at night. Gone is the backache from the loadout, complaints from neighbours, venue staff or even bandmates and the frustration of not being able to sound at one’s best trying to reduce the volume. Torpedo Captor was designed to cover the needs of direct recording or miking any kind of guitar or bass amp, in a live or studio situation. Reactive loadbox: Playing silently or at low volumes is often a requirement, especially at home but more and more on stage or in the studio. To play your amp without a cabinet you need a Loadbox. Two notes is known for the most accurate and feature rich Loadboxes in the world, using the reactive technology, in other words mimicking perfectly the impedance of a speaker. Your amp will absolutely believe it’s connected to a real cabinet. Analog speakersim: When using the Captor on stage to feed a PA, you will need to polish the sound coming from your amp. The analog speaker sim is derived from the acclaimed Le Preamp series. You will be able to get a detailed and focused sound for your monitor or the front of house while keeping a low volume on stage. Add a Torpedo C.A.B. with its large collection of IR Cab Sims for the ultimate direct solution. Format and versions: The Captor is the size of a large DI box, so you can conveniently place it on your pedalboard or on top of your amp. The Captor comes in 4, 8 or 16 Ohm versions (see product options), make sure to get the one that matches with your amp. Attenuator: If you wish to keep a cabinet on stage, the Captor features a direct speaker THRU or ATT output. It allows for full volume or a fixed – 20dB attenuation. Keep your amp in its sweet spot while at manageable volumes.

Great sounding pre for the money Hardly used but has been on the board so velcro attached etc Postage included having a clear out. Here's all the features. 2 Channels FET and Tube with Blend Switch 3 Band EQ Low Mid with switchable frequencies DI Out with pre/post source select Ground Lift FX Loop AUX in Phones out Passive Input Active input Link out FET Volume TUBE Drive & Volume Regulated 9V DC PSU, centre negative, 2.1x10mm connector type. (Not Included) TILT 'EQ Seesaw' function

Up for sale is my Ashdown Ant. Great Little amp I was using it as a back up to my main amp incase anything went wrong so it has mostly been on my pedalboard and occasionally switched on just to test etc. This is what Ashdown have to say about it. The ANT is a revolutionary pedal-board bass amp that delivers 200 watts of pure Ashdown bass tone into any 8/4 ohm speaker cabinet. Light, super compact and built for the road; fly dates are a breeze and whenever called upon the ANT will give you reliable Ashdown power and tone at every show, eliminating the uncertainty that backline amps can bring. The ANT also automatically adjusts its power requirement from 110v through to 240v so you can simply plug and play no matter what country the next show is in and the ANT will take care of it. Designed for bassists using pedals, modelers and effects processors to create their tone but can also be used totally alone with the 3 band EQ plus shape preset allowing easy tone sculpting. The balanced XLR DI out also allows you to run straight into the PA delivering your tone directly to the sound desk. Lastly the headphone out allows silent practice between gigs. Simply bring your bass and your pedalboard to the next gig for an ultra portable set up! Postage included any questions feel free to ask looking to sell not after trades currently.

Sold Up for sale is my favourite rig. I'm open to offers for a small cab along the lines of a 1x12 or 1x10 but happy to discuss. I will split or sell as a whole as I'm no longer gigging so this is fair to much rig for home use. This is a great amp I purchased in 2021 from PMT and is registered with Ashdown so had most of its 5year limited warranty left. Been gigged a handful of times so is in great condition. The cab is a 4ohm 4x10 rated at 1200watts RMS made by Mike Walsh of Zoot when he used to make amps and cabs (Purple Chilli) it's neodymium drivers so is in the low 20kgs easy to lift on your own dimensions 620mmx660mmx440mm. Please feel free to ask questions your more than welcome to come try it out but due to size/weight and the usual collection would be the best bet for this. Will consider offers on smaller cabs such as 1x10/1x12/2x10

Hi collecting would be best but I can discuss posting as an option if required.

Up for sale is my favourite rig and I'm very unsure that I want to let go of the head but it's not getting used and I have projects in the pipeline that need attention. I'm open to offers for a small cab along the lines of a 1x12 or 1x10 but happy to discuss up for £1000 Roughly £700head £300cab I will split or sell as a whole. This is a great amp I purchased in 2021 from PMT and is registered with Ashdown so had most of its 5year limited warranty left. Been gigged a handful of times so is in great condition. The cab is a 4ohm 4x10 made by Mike Walsh of Zoot when he used to make amps and cabs (Purple Chilli) it's neodymium drivers so is in the low 20kgs easy to lift on your own dimensions 620mmx660mmx440mm. Please feel free to ask questions your more than welcome to come try it out but due to size/weight and the usual collection would be the best bet for this. Will consider offers on smaller cabs such as 1x10/1x12/2x10 also shortscale basses

Amazed this is still here. 😮

Hi I really like it but the key is the blend control can go from subtle to a vintage bite with that but it's a pedal that was constantly on my board and alway in the on position Led is on or off only unfortunately no indication other than on.

Not currently but might get chance to do some later in the week work depending

£100ono SOLD for sale is my 2x12 cab its a great bit of kit but due to no longer playing live i am letting it go. This is bascally a zilla vertical 2x12 cab turned on its side with wheels added and the blue tolex removed with a quick coat of varnish, not the best job in the world but it works. The cab is loaded with 2 Celestion BN12-300S A neodymium 12 inch bass guitar speaker that provide 600w at 4ohm weight around 25kg roughly. Collection is the option really but feel free to ask questions and discuss options with me. LE16 Leicestershire