Geek99

Are you bracing against the weight?

Yep - spoke

Spilled vino?

What I meant was that the plate on yours appears a bit closer to the edges of the body than these below; is that normal or is it just an aftermarket plate or maybe the photo angle ?

Should have been “just for once”…sorry The impulse purchases, I meant, and this one I get … beauty

Like the trans blonde … and the tort … excellent choices @stewblack WTF is it ?

Nice … and just for once I understand your choices @AndyTravis but the plate looks a bit weird on low E around fret 18? Shouldn’t double back on itself ?

Don’t sweat 😥 it, okay ? It’s not that traumatic… it’s not like you’ve had to fly a helicopter for a bit (like thousands of other trained military pilots)

He won’t take it from you as you’re not a plutocrat or oligarch … or are you?

What with the others being, you know … dead

Not an expert on shorties but I’m still tuned to your station…

It’s long past time for you to do something less than perfectly … [foot tap….]

Thanks @ped bass direct are out of stock

Does it have branding on it ?

There’s the word, right there

These were the ones made in the US from mexican spec parts and pickups but no carbon rods in neck, no case etc

I think he said he was from Mexico…(on another thread)

Hello roberto congratulations on your very good command of English. I had the red version of this and it was very good indeed. Worth every penny

No - connect one end to tone control, other end should be stripped back and the exposed copper splayed around under bridge to get the best conductivity (i copper tape it) then screw the bridge down tight https://www.bassesbyleo.com/bridge_grounding.html

No I just strip the wire section that’s under the bridge and spray the strands out - all you need is electrical conductivity. you can replace it with a longer piece if you like. I use copper shielding tape to stick the under bridge section in place and to give good grounding all over the control cavity this is basschat - help is what we do. It’s not like you’re on talkbass here

@KingBollock she has excellent taste

Yes - any random piece of wire should go through the slanted hole into the control cavity and then to an earth point like the casing of a tone control - leave some copper wire exposed So that it makes contact with underside of bridge this is all do-able