Geek99

I think both are amazing value and quality - can’t go wrong

Well done @Chownybass

Easy to fix - however should not be like that when new just jam a matchstick in there and forget the glue

No, it won’t

I have a couple of jazz bass ones (red and brown) like the one shown above

What bass is it for ?

But you didn’t ask me to help so that’s quite unlikely 🤔

I always liked the pointy ones

Or a new ba… doh !

Yes it’s intended to be a joke, I apologise if you’re upset i just don’t get the GAS thing

So … you … sold it on, right ? Just a wild stab in the dark 😛

It was whilst flattening the top frets that I realised how uneven they actually were the ends are beautifully done but the heights are very variable I put sharpie on again and used the block flat, got down to 2.25 on E at 12th after restringing and reapplying radius I’ll have another go tomorrow thoughts on this ? https://www.ebay.co.uk/itm/Guitar-Fingerboard-Luthier-Tool-Guitar-Fret-Crowning-File-Fret-Leveling-BeaH5G1-/174616181690?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=710-127635-2958-0

I did, yes, the fret rock on the stingray was very slight and I did doubt myself whilst doing it

So I found a two sided rectangular oilstone - half green and half black IIRC I bought it to sharpen chisels - I put a line of sharpie pen on fret 12 of the stingray I used the thin, long side of the oilstone to flatten fret 12 on the stingray just enough to remove the sharpie ink - the bass plays better in that zone trying Andy’s ski jump removal step on the P bass (using wide side of the oil stone) will have to wait until the weekend

I have a lot of time for mr currie’s bass playing; I think he is very underrated

I’m a genius :😇

Depends on the flower choice why not put it in a 51styje P

You could stick small flowers in the holes and use it to decorate your home?

Or do it yourself ?

Totally get this …

I just don’t see the point myself

Y Yes please

Andy - the 1.75 is on a different bass, which has a high 12th fret. 13 and up are fine I’ve got 2.5mm on the p bass still and it won’t go lower without upper fret buzz fret 1 gap on both is now 0.08mm

It’s a skill I need to gain - youtube time I think