-
Posts
4,778 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by Dan Dare
-
Saturday's gig was in a long room, all hard plaster walls, arched glass ceiling and full height glass patio-type doors along the entire wall behind the band. No drapes, few soft furnishings (barring the bodies of those in the audience). The sound was, um, interesting. Certainly didn't need reverb. Went down well and got asked back. Perhaps I should take a pink noise generator next time we play there...
-
It'll probably need a new amp module. They often aren't repairable, especially if made from Chinesium. May well cost more than buying a complete new speaker to get it repaired even if it's possible.
-
Interesting that more than one asserts that Markbass is over-rated. I must disagree. I find MB gear doesn't have the baked in eq that is designed to give products showroom appeal, even when set supposedly "flat". It is honestly voiced. It does not sound bright/hyped when you stand next to it, but it projects very well out in the room and has a real weight to the sound. It does lean a little more towards old school than some brands, but is none the worse for that. I'm don't use MB (I have an AG700), but I would be happy to do so.
-
Bill's spot on above. Leaving aside the fact that achieving a CD quality monitor mix is impossible unless you spend serious money or go the in-ear or even silent stage route, the aim should be to balance levels onstage to bring quieter sounds up to the level of louder ones. Drums and instruments that employ backline are not likely to need as much, if anything, in the monitors as vocals. Singers need to be prominent to aid pitching and phrasing. It's always best to avoid very low frequencies in monitors, as Bill points out, or everything will quickly become mud and you will likely have issues with feedback. I aim for intelligibility and some brightness, without cutting peoples' heads off, obvs, in a monitor mix.
-
Good to hear. I bet the fact that you were nice to them played a big part in their doing that.
-
A lot of useful advice above. I would urge you not to buy on recommendation alone. Unless it's really impossible, visit a shop or two and try some gear out. If you can, borrow equipment from a few friends and see how it performs in real world situations. You could even hire a few things and try them at gigs, Wattage is a very approximate measure of what an amp can deliver. It's often measured at one metre into a nominal impedance (as explained above), but that's not the full story. Speaker efficiency (how much sound a particular speaker will produce for a given input power) and impedance affect how much volume an amp and speaker combination will produce. Manufacturers usually measure wattage at a single frequency such as 1khz. They also measure over a few milliseconds (which is different from the real world demands that will be placed on an amp) as well as at the lowest impedance that an amp will work safely into, which inflates the figure. Once you ask an amp to process a complex musical signal, rather than a single frequency test tone, things change again. Really, wattage is pretty meaningless other than as a rough approximation. However, it's used as finding an alternative measure is difficult. The Rumbles are a safe, reasonably priced recommendation if you don't want to get too deeply into it and just buy something you can be sure will do the job. I find them a little bland, personally, but I'm an Aguilar user. I think the Elf plus a 1x10 you suggest might not be enough for your needs. I'd look at 2x10 as a minimum if you're playing with a drummer, unless you're doing jazz gigs in wine bars. Watts are cheap these days, so buy something that's more powerful than you think you might need. 500 may seem a lot, but in reality, a 500w amp will only be around 10% louder than a 200w one. You can always turn a powerful amp down, but you can't turn a low powered amp up when/if it runs out of steam.
-
With only the very occasional exception, I've always enjoyed good customer service from just about anywhere I've shopped. I'm always a mite suspicious of those who recount multiple tales of bad service. Yes, the odd thing can (and does) go amiss, but it makes me wonder what those who always complain about poor customer service are doing or saying to the staff at the places that allegedly give them poor customer service. Having worked in a number of public-facing roles, I know from experience how unreasonable some people can be. Could it be that those who never seem to experience good service might be contributing to the situation in some way?
-
Seymour Duncan P/J set v Aguilar same as
Dan Dare replied to Mike Bungo's topic in General Discussion
That bass currently resides in the Museum of London. It's described as "iconic". A bit pathetic, imho. The photo of Simonon smashing it calls to mind little Timmy having a tantrum because his mum said he couldn't have any sweets. -
Seymour Duncan P/J set v Aguilar same as
Dan Dare replied to Mike Bungo's topic in General Discussion
I'd get whichever is cheapest. Both reputable brands. -
Of course it will work. Whether you like it is another matter.
-
Covers bands - are they just parasites? (& how PRS works)
Dan Dare replied to Al Krow's topic in General Discussion
Yeah, like, er man, I only play originals. I mean, I've got integrity. I don't copy or rip off uvver musicians. My latest song goes C, Am, D, G. Nobody's ever dun nuffink like that before. Move over Mozart. Etc, etc, etc. Ain't nothing new under the sun. -
The ones I had made are for shooters. The idea behind them is that they allow normal level sound through but block loud transients. I found the company that makes them at The Game Fair a few years ago (I'm partial to a bit of fishing and shooting). They work as claimed, but I would still rather not use them unless necessary. The firm is Custom Fit Guards. Google will find them.
-
DH is 78 now. So her hearing would have deteriorated with age anyway. I'm 70 and mine is not what it was (high frequency loss mainly, which is almost inevitable with age. Acuteness is fine). Obviously, if one is playing large, loud stages, as was DH, the problem will be greater. As I said, I do carry and use plugs (I had proper custom fit ones made), but I prefer not to if I can avoid it.
-
This looks to be the easiest/cheapest option. You already have the passive subs and a spare power amp, so you won't have to sell the passives and buy actives (which almost inevitably means incurring a loss). You only need a simple 2 way active crossover to spilt sub and top feeds. Plenty of companies offer them - DBX, Behringer, LD Systems (their X223 looks good value at around £100), etc. All you want is a few extra XLR cables to feed the crossover and spare power amp and a couple of additional speaker cables (if you don't already have them). Even buying new, less than £300 should see you sorted.
-
Following from Down Under's post, your mixer may even have a sub output (both my Soundcraft and Allen & Heath do), so you may only need a power amp (assuming you continue with your passive subs). Used power amps can be had cheaply if you don't mind old school/heavy.
-
Is 4 strings really enough? (Oooo i went there)
Dan Dare replied to BigJHW's topic in General Discussion
Much truth in that. A 35" scale makes a lot of difference on a low B. It helps if your gear is up to reproducing it, too. No real world bass rig will give you a low B fundamental (31 hz) at high volumes, but the better ones get closer or cover their tracks better. -
Skytec and similar brands are, to put it kindly, absolute bargain basement (their stuff is aimed at the budget disco market) and I wouldn't trust claims of 1000w handling. They might cope with very short bursts in 4 ohm applications, but if your Dynacord can output 700w into 8 ohms, it'll destroy them with no bother, as you've found. You could get some better passives custom made (you're unlikely to find something suitable off the shelf), but passive crossovers, especially heavy duty ones, are inefficient and soak up a lot of power. At the levels you're running at, I'd look at an active crossover plus a power amp to drive your passive subs. Either that or go for active subs.
-
The problem with plugs, ear protection, etc is that either the whole band has to use them or nobody. I don't like them personally - they make me feel isolated from what's going on, but I have to use them sometimes in self-defence. My preferred option is that nobody uses them and we keep onstage levels reasonable and let the FOH do the heavy lifting. Once one person, especially the guitard, wears them and turns up so he can hear himself, everything goes to hell in a handcart very quickly.
-
Is 4 strings really enough? (Oooo i went there)
Dan Dare replied to BigJHW's topic in General Discussion
Our singer has a penchant for Eb, so I carry two basses and tune one down a semi-tone. It's not just because it's easier to play in E than Eb. I also like having the low fundamental. -
Thunderfunk are great amps, but not exactly found on every street corner. If you want that old school solid state heft (and who wouldn't?), a decent preamp plus powerful PA power amp is one possible option. Before I went Class D/lightweight, I used a BBE pre plus bridged QSC 1850HD and it had a truckload of slam. I still remember it fondly, but the lightweight stuff is so much easier to schlep at my advanced age.
-
HOW hard is it to find a decent band to play in these days?
Dan Dare replied to Lfalex v1.1's topic in General Discussion
This. You've given 4 examples in total. If they're all you've tried, you've barely scratched the surface. You will not, repeat not, drop into something fully formed and good unless you are extraordinarily fortunate. You're probably more likely to get all six of those lucky balls on Saturday night. Did you give the guy a chance to explain why he called you 3 hours late (11pm is hardly the middle of the night), or did you "tell him what to do with his band" immediately? I'm starting to sense a whiff of entitlement from your posts. The world doesn't owe any of us a gig or a job. It's up to us to go out and get one. Unless you are hot stuff, it's not easy. -
When did you realise….. you weren’t going to “make it”?
Dan Dare replied to Rayman's topic in General Discussion
Never thought I would "make it" in the usually accepted sense - live in a castle, have helicopter and Ferrari, etc. I had short periods of playing for a living, but I nearly always kept a "proper" job going. By the time I turned 30, I realised I would likely need a pension, so kept the music as a side-line that made me some extra lolly. Had a lot of fun and got to play with good people and go to nice places courtesy of the music. Now I'm in my dotage and able to live comfortably, I'm glad I did things the way I did. I know several people who did better than I did back in the day from music, but life is not as easy for them now as it is for me. -
ON HOLD PENDING: BAREFACED BB2 GEN 3 - *SOLD*
Dan Dare replied to mrn1989's topic in Amps and Cabs For Sale
-
Exactly. People can argue with each other on here all they like about hobbies, giving people a lift to the pub, invigilating in exams, etc, etc, but it won't make a scrap of difference to the way insurance companies run their affairs. It isn't people on here who need to be convinced, it's the insurers. People are free to take a chance if they wish. It's a free (ish) country. But they shouldn't complain if it blows up in their faces.