Jump to content
Why become a member? ×

yorick

Member
  • Posts

    1,899
  • Joined

  • Last visited

Everything posted by yorick

  1. Jay Turser............. [url="http://www.jayturser.com/products/bass/jtb-402.php"]http://www.jayturser.com/products/bass/jtb-402.php[/url]
  2. Just sold my OBC115 cab to Eddie. Swift and painless transaction, nice guy to talk and deal with!!! Good comms. Nige
  3. The upstairs bar at The Asylum might be a good place. Just outside the city centre, adequate parking nearby. I can enquire if there's enough interest. Howabout a sunday afternoon 1-5pm ish?
  4. [quote name='magicmarco' timestamp='1316702848' post='1381708'] If only this was finished in White, been after one for a while, may still consider an orange one, is it still for sale? [/quote] Still for sale
  5. [quote name='Ou7shined' timestamp='1316693584' post='1381513'] Ain't this a 400w? [/quote] You could well be right, i assumed it was the same power handling as the SP210 cabs. Will double check to night and amend if necessary.
  6. SOLD, Orange OBC115, 400w, 8ohms, made in the UK. Good condition apart from a few small nicks in the vinyl on the top side edges. Can be seen in the pic below. Collection only, as it's a bit too big to courier, and i'm a bit too idle!!! £180 to you squire, which is what i paid for it earlier this year. [url="http://basschat.co.uk/topic/151554-all-things-orange/page__st__20"]http://basschat.co.u...ge/page__st__20[/url] If you want more detailed pics, just let me know. Nige SOLD SOLD SOLD ETC
  7. Somewhere between here...............................................and here
  8. Upgraded.............
  9. Just acquired a drum machine from Nick. Well packaged, as decribed, and arrived quickly. Cheers
  10. Owned a JM4 for yonks now. Well made, sound great. The neck width on mine at the nut is 38.75mm(yes i have some digital verniers) Mine has Delano MM and J pickups, Glockenklang preamp with two band eq, active/passive and a coil tap for the MM. Overall, a great versatile bass, well worth the dosh.
  11. I had John Diggins build me a mahogany bodied bass years ago, with pretty much that finish. All he used was a thin satin lacquer coat. It will shine up with use though......
  12. Or on a cheaper budget, the Behringer BDI21. Budget version of the Sansamp
  13. Smallest to bar staff Biggest, 30, 000 people at a festival in Japan.
  14. Sold Antonio a bridge. Payment came through quickly. Efficient transaction. Nige
  15. I always use both outputs on the back of the amp, one into each cab.
  16. Zon=nice, Fodera=blleeeuuurrrgh
  17. [quote name='The Bass Doc' post='1366264' date='Sep 8 2011, 12:22 PM']At this point in time I play bass better than Jaco Pastorious.[/quote] At this point in time everyone plays better than Jaco.....
  18. Sennheiser do some good radio microphones. It's the same set up as a guitar transmitter type system. Headset into transmitter; receiver, via xlr into desk. Adjust levels to suit venue etc. The one thing to watch out for is the frequency of your transmitter receiver. The government are selling off some/most of the frequencies covered by some of the units. It may be worth looking at going digital, but it may cost you.
  19. Welcome............
  20. From what I remember, most Trace heads run down to a minimum 4ohm load, so you'll need two 8ohm cabs to get the full power from your head. As it stands, you probably get about 150-175 watts from your head with a single 8ohm cab. Hope this helps clear things
  21. Welcome
  22. I had one of the Spirit headless basses, and it took about five seconds to tune down to D. The threads are quite fine, so it doesn't take too much effort.
  23. '62 Precision, signal split between two Orange Terror 500's, each powering 2x SP210's. One has 12AT7 valves for clean, and the other has the stock 12AX7's for crunch.......
  24. Fake
  25. Looks like a refinish, and a none original scratch plate, but apart from that, loks good.
×
×
  • Create New...