Cuzzie

Oh very much for real at the end of the night it’s more of a slurrrrring shhhhhhlllllaaaaaaaaange😴 didnt take it as a criticism, more like a friendly prod to be more correct! Unfortunately i’ll Be about the only stone cold sober one in the room having to play and then pack and drive home, but after the local has organised a lock in 💪🏾🤘🏾

@dmccombe7 Gaelic it’s “Slainte Mhath” if written properly

@dmccombe7 excuse lazy phonetic typing!

Aye, A good Burns to you all. Tomorrow night from me, I am addressing the Haggis and will Be reciting that poem, and then doing the music for the gathering in our village hall. before that we have a piper for stripping the willow. not sure if people really know what they have got themselves in for with me performing! Slangevar!

@Wolverinebass the feet at the bottom are screw in and screw out so it can be rack mounted - I remember someone on Talkbass showing how he did it a couple years back. Also on that recent video he did nod towards someone out there, or maybe them who are producing official racks for it. Pretty sure you can get a dUg Ultrabass cheaper 🙏🏾😘🤫

@Al KrowHeight or irrelevance, I might like a Dacia Duster, do I have to own one?

What I like and don’t like, you don’t know....! Took your time answersing on here, rearranging the pedal board again, or polishing the gold hardware?

Put gold hardware on @Al Krow will lap it up, he has dubious taste

Sandberg VT model is the beans - can Be had for under a grand second hand

Solid work that - well done

Anyone else apart from knicknack used a Nash? People across the water use them and rave, Glenn Hughes uses Nash and he makes them sound great, but he is a little bit talented.... Personally I used to think they were a very expensive bitsa bass company - but that may have changed. I say buck the trend and get one, probably not many in the Uk

http://www.tech21nyc.com/products/powerengine/deucedeluxe.html Based on the old Power engine, now 200w FRFR. 13kgs in weight And before anyone asks, yes it’s good for metal

https://www.darkglass.com/ and a V2 M900

True - but some older att’s may come on the market to trade different. @LewisK1975 I know is a fan!

So this is the most active Yammy fan boy area, and I know it’s a ‘BB’ thread, butnfor all of you like like the Attitude Billy’s sheehan bass, there is a new one due out soon in the original colour he would have modded his P bass on and a roasted maple neck. Neck pick up looks different as well . Enjoy.....

Or it could be a natural wood process where fungus has got in like buckeye

I agree, it isn’t!!! needs to be set alight and then put out with a spade. If there was a bass that looked like Danny Trejo’s face that is perfect for me

Like it

Cheers Did that for a while before testing it, but will do it a bit longer

No worries, never say never!

Ok The Out jack can go to your amp in the normal way like any other pedal using a normal guitar lead. I presume if using an amp thisnis hooked up to a cab and this will blare our a glorious tone. if you wanted this time to also go out the PA system you can take a DI signal from the Your amp (it probably has one) to the desk and PA. This will give 2 sources of sound. It is possible to just go guitar into pedal - then a normal cable out the pedal into the PA just how you could with the paradriver. Only difference with the paradriver is you may go out the jack into the amp and out the DI out to the desk simultaneously instead of taking the DI out the amp. Essentially you could still use this Geddy pedal with no amp at all, straight into the PA with no extra DI box

Bit of useless knowledge for anyone. Accidentally popped my sennheiser e935 Microphone through a 60 degree wash cycle with some clothes. Not only does it smell nice, but it still works, and has cleaned my vocals up (🤦🏾‍♂️) Fair play to Sennheiser

But you can go straight from the Jack output into the desk either via another 1/4” end, or a mummy/daddy 3 pin XLR. Most desks accept balanced or unbalanced signals