Jump to content
Why become a member? ×

tayste_2000

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    4,692

  • Joined

  • Last visited

 Content Type 

Everything posted by tayste_2000

  1. tayste_2000
    Well not sure, it's all ordered just hoping to do a rebuild thread as none of it is new but it's all pretty rare. One thing I should be getting depending how money goes over the next few weeks is a 1x18 Low pass on the input and high pass on the link out so turns my 4x10 into a full range stack with everything below 250hz going to the 1x18 and everything above to the 4x10. Really changes the characteristic of the 4x10 taking away it's need to hammer out those low lows As a hint I'm getting another 2 amps
  2. tayste_2000
    Yeah man for sure, I don't think you'll be able to keep away when you see what I've bought
  3. tayste_2000
    You should hear it, other than the hiss that is inherent with most things made in 1957 it sounds beautiful
  4. tayste_2000
    I know Andrew mentioned Good luck and make sure you go upstairs to try the new toys
  5. tayste_2000
    So after a failed attempt on my Birthday to buy anything (which resulted in my going into a strop) I'm all sorted now got another 2 amps on order and just discussing a new cab. I have tried a wide range of totally new Matamp stuff, I'll check with Jeff tonight if I can disclose any information. Also my red tolex arrived apparently I bought enough to carpet a flat.
  6. tayste_2000
    That and making peoples ears bleed so they can't hear all those wrong notes
  7. tayste_2000
    Boss FV-500L Ernie Ball Jr Vol Pedal 25k I've owned both, Boss can generally be had for cheaper but both top notch quality
  8. tayste_2000
    Sorry for the delay had a few people wanting dibs that never panned out. Ok these are the external dimensions, probably best to take off 2-3cm if you intend to leave the current foam in or remove 1cm off the figure if you strip the foam out. w x l x h Big Case 48cm x 76cm x 81cm Med Case 38cm x 68cm x 74cm Small Case 58cm x 56cm x 53cm
  9. tayste_2000
    After a year these are all long gone
  10. tayste_2000
    I'm off to the factory tomorrow might get a birthday treat
  11. tayste_2000
    My home practice rig Custom Matamp 4x6 and 1957 Dynacord MV15 Simply awesome One for a size reference unfortunately it makes the cab look huge but it really is tiny
  12. tayste_2000
    My home practice rig Custom Matamp 4x6 and 1957 Dynacord MV15 Simply awesome One for a size reference unfortunately it makes the cab look huge but it really is tiny
  13. tayste_2000
    Few tweaks to my home/studio board Going to get my PT Mini back at home and setup a more respectable PT Jr with none of the pedals featured here. TBH the PT JR shown here really is a fun with tube amps board and then the mini will be the wierd noise board and everything on the PT Jr can be run on batteries for ages. Signal chain is Kimbara (Shin Ei) Wah -> Fender Vol/Tone -> Mojo Hand Colossus -> Mojo Hand Huckleberry -> Tone Factor Cream Pie -> Dod 250 -> EHX Nano Muff - > Mojo Hand 442 (Bass) - Subdecay Noisebox -> Subdecay Prometheus -> Subdecay Echobox
  14. tayste_2000
    You know the RC-3 has some lag when switching to the next loop? Might be worth reading up and double checking before you get rid.
  15. tayste_2000
    Since all these are being used for is to pile crap on in the practice room I have the following cases for sale. All are collection only. I will get external measurements tonight, pictures are to just give you a rough idea of scale with that else is in the shot. Largest Case, will likely fit most 4x10's doesn't fit my Matamp 4x10 (but it's a very deep cab) but does fit my 2x12 securely with quite a gap around the edges. case has wheels - £50ono Medium case, probably fit a combo in this would be more suited to a guitarist I'd say, just a bit shy of fitting my 2x12. Case has wheels - £40ono Small case, I use to use this to carry my 400+ in headcase around with a bag of cables on top of it, it's probably about 21 inched wide internally by 20 inches deep. - £30ono You can of course refoam them to suit All of these are collection only and I'd prefer cash on collection as tbh I bought all these on here got all the measurements, checked it with my gear, paid for them then went to collect and none were ideal for what I own so you can come down try it if it fits you pay for it, if it doesn't your choice as to if it's any use for you. Cheers
  16. tayste_2000
    How much for the 16 second delay and what's wrong with it?
  17. tayste_2000
    Definately thinking of selling the faulty transmitter and a brand new receiver if you want to shoot me a PM. It's missing the metal clip on the back, no damage it just popped off when I lent it my guitarist and he never bothered to find it.
  18. tayste_2000
    FFS Mods please move
  19. tayste_2000
    So I own 3 of the X2 wireless units and they have performed flawlessly for years but now 2 of the transmitters have developed problems, 1 intermitantly cuts out and the other the locking bit of the jack ripped out with the jack one time (I say ripped more like fell out with the jack still attached) Now I have 3 perfect receivers and 1 perfect transmitter and I just want to know if there is anyone out there that can fix these before I sell the lot and switch to the Line 6 Relay system. Cheers
  20. tayste_2000
    I'll be at Krash Night Club The Venue Market Street, NE1 6JE Newcastle upon Tyne On Saturday 9th July if anyone wants to come try my GT200 and 8x10 Cheers
  21. tayste_2000
    Yep I highly recommend it I'm going down in the next week or so just waiting for my damn tolex to arrive.
  22. tayste_2000
    Yep they still do the faceplate that lights up along with whatever custom options are possible.
  23. tayste_2000
    Yes now comes the good news of what I'm buying from Matamp mwhahahahaha
  24. tayste_2000
    SOLD
  25. tayste_2000
    Cottonbacked is what you need
×
×
  • Create New...