Jump to content
Why become a member? ×

tayste_2000

⭐Supporting Member⭐
  • Posts

    4,692
  • Joined

  • Last visited

Everything posted by tayste_2000

  1. Bought ages ago, barely used. Was a custom job for another BC'er, works passively but if you use power then you can take advantage of the huge pink led on it (similar to a jewel sized light on an amp) 1 in 2 out, foot switch to select between them, simples Standard MXR box sized I found this from the original pm Maxx Tuner mute / A/B Box - As new. I had this custom made for me by www.electrick-garage.com with a GIANT, BRIGHT, FLAMBOYANT PINK LED... I later applied the glittery Pink Pather as it put a smile on my face, although it can easily be removed if it's not to your liking. £25ono Cheers
  2. Not used this for a while now and figured I'd see if it was any use to anyone before I cut all the sheathing off and have 3 more instrument cables etc. The cable is made up of: 3 20ft high quality instrument cables in black, blue and red with Neutrik right angle jacks at one end (from now on refered to as pedalboard end) and Neutric straight jacks on the other end (now refered to as the amp end) 1 20 ft 230v power extension with female IEC (kettle lead) at pedalboard end and male IEC (kettle lead) at amp end. Basically plug a kettle lead in near your amp and run power to your pedalboard in 1 thick cable 1 20 xlr lead female connection at pedalboard side male connection at amp end. This is used if you have a di box on your pedalboard then you don't need a specific line run to the front of the stage it can just be plugged in near the back like your amp was 1 20ft 9vdc boss power extention, faulty, it might be an issue with the jack but tbh OBBM warned me when he made it that it potentially wouldn't work due to cable length. I've never used it as the 230v power option is there to power the entire board nicely Pictures Seen here with an IEC to figure 8 connector to connect directly to a diago or shredfreak power supply. This is NOT included but very easy to make Here is an example of it all hooked up. You can see how clean and tidy it all is. As you can see there is roughly 1ft of cable free at each end meaning a maximum of 2ft between 2 cable jack points (it will get easily to both side of a PT Mini, Jr and 2, though you might struggle with a pro if you have it all in one chain frim start to finish. The cable is heat shrunk at each end and every 3 inches which stops it bunching up and twisting and all in all quite good condition, but not brand new, few snags and such on the outside sheathing but that's the nature of the material Basically the setup I ran in those pictures was: Wireless near amp Black cable to Board Pedalboard A/B Box A into Blue cable to ch1 of my Mesa Boogie 400+ B into Red cable in ch2 of my Mesa Boogie 400+ XLR out of Peterson tuner as emergency DI in case of issue with amp/di I liked this colour coding as it was like red = hot as in gainy channel and blue = cold as in clean channel The other option is to use the red and blue as send and returns from your amp and pedalboard (if running fx in the fx loop) and the black to the amp input and just plug a standard cable into the front of your pedalboard. I think I paid £140 for this plus shipping about 3-4 years ago, I then sent it back to have something added which cost another £70+ (postage on this is £15 each way due to it's weight) I will take £90 for it shipped but open to offers just bare in mind it has to be sent parcelforce due to the weight and this is costly. Here is a thread about it [url="http://www.talkbass.com/forum/showthread.php?t=303083"]http://www.talkbass.com/forum/showthread.php?t=303083[/url] incase anyone thinks there is an issue using power in the same cable loom as instrument cables Cheers
  3. Doug Wimbish - New Dimensions For Bass - Signed by Doug Wimbish himself - SOLD includes the book with the notation and tab for what he plays on the dvd. John Entwistle - Bass guitar Master Class - SOLD Jaco Pastorius - Modern Electric Bass - SOLD includes book with the notation and such. Victor Wooten Bass Day 1998 - SOLD Bass Day 1998 - SOLD All prices include shipping 1st class delivery, will cut deals for multiple buys. I've used Amazon to gauge prices so if you think they are too expensive [b]PM[/b] me a legitimate source where they can be had cheaper and the prices will be adjusted accordingly All discs in great to mint condition, watched through a few times and generally put on to show friends what can be achieved with a tiny bit of practice. I'm going to check tonight as I have more bass DVD's
  4. One of these [url="http://www.dolphinmusic.co.uk/product/3791-art-tube-mp-the-original.html"]http://www.dolphinmusic.co.uk/product/3791...e-original.html[/url] Got the box and power supply, works great, looks great, sounds great etc etc not using it anymore as I an Overwater with a DI in it and that does all of my studio stuff now. £25ono Cheers
  5. I'd buy 2 1x15 orange cabs and put them side by side with the simms on top, that would sound very very very nice
  6. Fair enough Not sure you'll be able to fit the Simms Watt on these narrow cabs your set on
  7. This can work well for your situation, get it switchable 16Ohms and 4Ohms an d you can use it with the orange or Simms then
  8. Mate don't sell this PM me your phone number and I have a solution for you but can't be bothered typing it. Cheers
  9. MY band has been using this for years to play backing tracks live as it allows for 4 separate outputs allowing for stereo headphone mixes and stereo mixes to the desk or if you want to be all Pink Floyd like 4 different signals for you to send to 4 different speakers. It is a great notepad and we've never had an issue or had it crash or anything in the time we've had it, it's in good condition and comes with a battered alluminium flightcase that I will refoam before you get it. I also have the manual for it which requires a bit of reading before tackling the machine. [url="http://www.dawsons.co.uk/acatalog/info_00076010.html"]http://www.dawsons.co.uk/acatalog/info_00076010.html[/url] This is the hard drive only version but you can add a cd writer if you need to. I'm after £200ono Any questions let me know. Cheers
  10. Due to a bit of an overspend at Christmas and the fact it's not been used for over a year and really with a GT200, 400+ and Strategy 400 it's not going to be used any time soon So up for grabs is the Orange faced head as I sold the Silver one a few months ago it's been fully serviced but still sporting Mullard EL34's with plenty of life left in them, I think the preamp valves are all Brimar, either way it sounds fantastic, works at 16 or 8 ohms well 15 and 7.5 but it's the same thing also unlike everyone that comes up on ebay this is extremely clean and well looked after. 4 channels each with their own Bass, Treble and volume controls, 2 inputs per channel which can also work as outputs so you can daisy chain channels to squeeze every last drop of volume out of it, this amp is fine for most people's gigs, Monz managed with my silver one for 3 months with my Matamp 4x10 when he was waiting for his GT200 and 2 4x10's. Not a lot more I can say about it, it's always been my favourite sounding amp, well it and the MK2 I also have (Which I'm keeping because my g/f likes the colour more, but if you really want the MK2 over the MK1 I can sort that out that one however is loaded with old Mullard valves so sounds a bit different to this one but in a more vintage fuzzy way, this is definitely the louder of the two) They have more low end than you'll ever need and plenty of treble on tap when you want, was good enough for the Ox to use during the 70's After £300 but open to offers. Cheers
  11. Full working condition, no remote, flat screen but one of the old big backed tele's Collection from Stockport area Has stand etc etc It's been replaced with my Chrimbo present It's a very very good tv, had people asking if it was HD when we were watching normal DVD's Can throw in a Marantz dvd/cd player thats a bit finiky but hey ho tis all free. Am just too nice.
  12. Got it as well, thanks for the heads up. I already have the Peterson one but nice to have both I guess , Peterson is native to the Ipad though
  13. On Ebay cheeeeeeeep [url="http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300501874236&ssPageName=STRK:MESELX:IT"]http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...=STRK:MESELX:IT[/url]
  14. Mojo Hand Juju Very rare, only 27 made Blurb The fine folks at Mojo Hand are offering up a limited edition boost/dirt pedal similar to the first channel of their Copperhead stomp, but with one foot switch and a toggle for more dirt. Dubbed the Juju Boost, there will only be 25 of these pedals made. The Juju Boost sports two knobs – level and gain. Each pedal is a different color combination with no two being exactly alike. Every one comes hand signed, serialed and documented [url="http://www.effectsdatabase.com/model/mojohand/jujuboost"]http://www.effectsdatabase.com/model/mojohand/jujuboost[/url] This is light blue with a white voodoo doll on it, its a very good boost doing everything from crystal clean to pretty gritty, works great with tube amps hence why I bought it. It's in great condition with velcro on the bottom, fully functional with box (I think) no Juju bag though but trust me these aren't as good as they sound. No sound clips as its more of what your amp is capable of, this will get a tube amp really nice and dirty. You can see it here on the PT Jr first pedal on the bottom right before the Tomato Fuzz I'm after £65 for it.
  15. Pedaltrain Nano NYC Lunchbox Diago Mini Man
  16. [quote name='Dudgeman' post='1036098' date='Nov 25 2010, 11:31 AM']As you can see the board is now fully wired up. There is still room for a couple, possibly 3, more pedals...I can just get a boss pedal to the rt of the BSW, definitely get one between the Lehle and the boss HM and obviously to the left of the BB..so hopefully that should help future proof it. Although the way it sounds at the moment I can't think of too many additions. Had a great reheasal with it last night..never hit a knob by mistake and now it is all held down with velcro and the feet have been removed, and stored away safely, i can still make volume alterations to the pod if need be..despite the main knobs being covered. One of the nice things is the panel on the rt side. This has a fused/switched kettle style in put that is soldered to a 4 gang in the box. that covers a seperate supply to the Pod and then A Johnnyshredfreak power supply to all the other pedals. Many thanks to Johnny..he was a great help and brilliant service as well.I was going to run a seperate supply to the VE 20 as it draws quite a current but it all worked so well last night that I am going to leave it as it is. There is also room on the daisy chain to run another 3 pedals as well should I need it. I also love the fact that I took the time to solder in the Input and 2 output jack sockets so all I need to get going at gigs now are 3 leads and one power kettle lead....you should have seeen the amount of transformers and leads that I used to lug around..must have been mad! All in all I am really happy..the whole thing weighs in at just over 15kg..so not a back breaker, but admittedly not the lightest thing around. I think that I am not going to worry about a sepcific pedal board flight case but will look for a standard flight case as they seem to be cheaper S/H and also I need to be able to store other stuff for transport..like our IEM system/Mac etc..Have one spotted already so hopefully a deal can be done. Hope you like it..[/quote] I have the perfect cable for you OBBM make me a custom pedalsnake it's got an IEC power lead, 3 1/4 instrument cables and an xlr all nicely sheathed together. Let me know if you fancy going that one step further into OCDness
×
×
  • Create New...