C@meron

Hi guys, sorry a bit late with feedback. Thanks for comments. I have now tracked the problem to intermittent fault on switch, which I shall replace in due course. Problem is that wiring is too short to extract switch on its own, so will have to rewire all soon, with longer wires throughout, to make it easier for future work.

Each pick up works separately, but with toggle switch in middle position, neither pickup works. I assume this means toggle faulty, as wiring to each pickup must be in place to enable each to work independently? Any suggestions?

Thanks Casapete The advice re wattage was from Peavey, but they are baffled by the part no. being "15435 8 Oms" as15435 should be 4 ohm speaker, but it is definitely 8 ohms. As it is not in their current range, they do not seem to have any more info. I was wondering if it was manufactured in UK, but unfortunately UK plant has closed down. I was hoping some ex Peavey UK techie would have more info?

Hi I recently acquired a 15" Peavey bass speaker cab, Part no. suggests it is 4 ohm, with 35 oz. magnet, but it is marked 8 ohms; and meter test confirms it is 8 Ohms. One source tells me not to drive with more than 125 watt, but I rather fancy the TE Elf amp head, which delivers 130 watt at 8 ohms. Any suggestions as to who might have definitive answer as yo max wattage?