
matthewkeyss
Member-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by matthewkeyss
-
Hi everyone I recently bought a MIJ 89' Fender precision, see my previous post: I did my best to check the bass over when I bought it. However, I couldn't test the truss rod in depth because it was at the heel and would've required removing the neck. Over the last 3 days since I bought it, I've been adjusting the truss rod to assess its health, and it's been behaving strangely. I loosened the truss rod quite a bit at first, and now I can't get it anywhere close to how straight it was before. The truss rod moves counter clockwise without much resistance, but after a certain point of turning it clockwise it rapidly builds up resistance to the point where I can't move it further. Like an exponential curve of resistance, if that makes sense. I am stuck with about 1.2mm of relief on the 12th fret (capo 1st fret, hold down 20th fret), which is far too much for me. However, I know the truss rod can go further, as the relief was far less than this when I bought it on Sunday, before I adjusted the truss rod. The truss rod is behaving like it's 'maxed out', but I don't think this is the right characterization, because it's not due to the neck being too warped/bowed for the truss rod to handle. The truss rod just has limited movement in the clockwise direction. Could it be that it's just 'stuck' and needs a really good push? Any advice would be very much appreciated.
-
Health of maple fretboard on a fender precision bass
matthewkeyss replied to matthewkeyss's topic in Repairs and Technical
Also, he lowered the price to £900. And then take into account the free delivery and it’s more like £850. So not as bad as it first sounds, perhaps? -
Health of maple fretboard on a fender precision bass
matthewkeyss replied to matthewkeyss's topic in Repairs and Technical
Hi everyone! Thanks so much for the input. The serial number for the bass is actually C008452, which would make this a 85-86’ bass, right? The seller seems to think it’s an 89 for some reason. I agree it’s a little overpriced, but I am located abroad in an expensive country. On the other hand, he’s delivering it for free as he happens to be passing through my town on Sunday. I like my instruments to have an interesting history. That matters as much to me as it being a good instrument. My other bass is a 90s Yamaha TRB6II, also Japanese made. I’ve wanted a MIJ p bass for such a long time, but they always get snatched up before I can get my hands on one. It’s my 30th birthday soon so this is really fortuitous timing that this popped up at this moment. -
Hi everyone I’m about to buy my first vintage bass with a maple fretboard but I’m a bit in over my head. The bass in question is a 89’ MIJ fender precision. It’s in amazing condition apart from the fact the lacquer on the maple fretboard is peeling slightly on some frets on the G side of the fretboard. I have attached a picture. 1. Is this a problem in general? Or is this normal on vintage maple fretboard basses? 2. If it is a problem, what is the harm to the value of the bass? The current listing price is £950. 3. Can this be repaired non-invasively? Or does it involve something stupid like removing all the frets and redoing the lacquer of the entire neck? thanks so much!!! Best, Matt
-
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss replied to matthewkeyss's topic in Amps and Cabs For Sale
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss replied to matthewkeyss's topic in Amps and Cabs For Sale
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss replied to matthewkeyss's topic in Amps and Cabs For Sale
-
Ibanez BTB676 Ibanez BTB 676 - £250 SOLD
matthewkeyss replied to matthewkeyss's topic in Basses For Sale
-
Ibanez BTB676 Ibanez BTB 676 - £250 SOLD
matthewkeyss replied to matthewkeyss's topic in Basses For Sale
-
Ibanez BTB676 Ibanez BTB 676 - £250 SOLD
matthewkeyss replied to matthewkeyss's topic in Basses For Sale
I'm sorry newfoundfreedom! Shipping outside of the UK is a bit too far outside of my comfort zone for now. ☹️ My current shipping experience amounts to getting a markbass combo back from Barcelona as hold luggage in a not so suitable cardboard box. Luckily, and against the odds, it survived. So many fragile stickers it probably offended the baggage handlers. -
Ibanez BTB676 Ibanez BTB 676 - £250 SOLD
matthewkeyss replied to matthewkeyss's topic in Basses For Sale
-
Ibanez BTB676 Ibanez BTB 676 - £250 SOLD
matthewkeyss replied to matthewkeyss's topic in Basses For Sale
Basically the input died over a long period of time, and it was sensitive to the positioning of the cable going into it. I am pretty sure the preamp works fine. Last time I tried (several years ago - I have been out of the country), I could still get a sound out of the bass if the cable was properly positioned. I will double check that this is still the case. EDIT: FDC rightly pointed out in a PM that it might be the battery connectors rather than the input. I can get a constant sound out of the bass with careful positioning of the batteries. Anyone interested in seeing a video demonstration of this just shoot me a message on WhatsApp. TLDR: Preamp works fine. -
Hi everyone I am selling an Ibanez BTB676 which is admittedly in pretty shoddy condition (previous owner, as well!). First things first, several things to note: 1) The input no longer works and likely needs resoldering or replacing. The active preamp still works fine. 2) The battery cover on the back had to be snapped off in an emergency at a gig. Internal screw cases need replacing, as well as the battery cover. 3) The bass has various dings and scratch patches. It's not in terrible cosmetic condition though for a bass with the amount of use it has had (see pics). 4) It DOES have some oldish rotosound strings on. I just took them off for picturing of the fretboard. Strings aren't super new but not super dead either. Overall, it still looks good, has a great playing feel to it, and I think it could make a nice bass for someone after fixing it up. These upgrades are pretty cheap if you do them yourself, but unfortunately I do not have time to get it done or the money pay someone to do it before I leave the UK on the 14th February, hence the low price. Collection from Maidstone, Kent. Will be in possession of my brother (also in Maidstone) after 14th February. PM for enquiries. Can also call +44 seven 429 58812 six. Thanks, Matt EDIT: Sorry, have increased price to £250 from £200. Amidst uploading several things I had forgot how much I had planned to sell it for.
-
Hi everyone, I am selling a Stagg ¾ size EDB that I have owned for about 5 years. I bought it brand new for a pit orchestra gig I wanted to get involved in at the time, and since then it has received minimal use. Perfect working order, minor cosmetic wear. Comes with original strings. While they are renown for being terrible in general, mine do not have any obvious manufacturing defects. Comes with standard padded gig bag. Collection from Maidstone, Kent. I will only be in the UK until the 14th February. My brother, also in Maidstone, will be in possession of the bass thereafter. PM for details, or call at +44 seven 429 58812 six. Thanks, Matt
-
Hi everyone, I'm selling an EDEN 210 XLT cabinet, that I have owned for around 8 years, and bought secondhand in London for £220. I don't know much about the history of it since I bought it off someone who didn't really know what it was, hence the bargain price. I used it fairly frequently for the first 4 years, and since then I have mostly been out of the country so it has been sitting and collecting dust. According to the serial code (0401E1004), the cabinet was manufactured in January 2004. It's still in acceptable cosmetic condition, works as it should, and sounds great. Collection from Maidstone, Kent. I may be able to drive to nearby areas, at buyers expense, if I can convince a friend to help me out. Say, a 30 minute drive. I will be leaving the UK and moving to Denmark on the 14th February, so I will only be around until this date. Thereafter, the cab will be in my brother's possession, who also lives in Maidstone. PM for enquiries. Available to call at +44 seven 429 58812 six. Thanks, Matt
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss replied to matthewkeyss's topic in Amps and Cabs For Sale
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss replied to matthewkeyss's topic in Amps and Cabs For Sale
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss replied to matthewkeyss's topic in Amps and Cabs For Sale
-
Aguilar AG 500 AG500 Amp Head, price drop £450
matthewkeyss posted a topic in Amps and Cabs For Sale
Hi Guys I am selling a 2 channel Aguilar AG500 amp head. It is in pretty nice condition, and comes with the pictured case, power cable and also the channel footswitch. Collection from Maidstone, Kent. Until the 5th February, I can possibly sort out postage within the UK at buyers expense (courier and packaging). You can contact me on here, or by mobile at +44 seven 429 58812 six. Thanks! Matt P.s. I have been locked out of my old basschat account but can be found here: https://www.basschat.co.uk/profile/11275-matthewkeys/