Rollo

Hello, I’m sorry but your specs aren’t perfectly exact. This is the real specs sheet : Buckeye Burl Top Ash Body w/ Walnut Tone Block Hand Rubbed Oil Finish 35″ Scale Length, 24 Frets 3 Piece Maple Neck Macassar Ebony Fingerboard Side Dot Inlays Bassculture Motherbucker Dual Coils Aguilar OBP-3 in 18V mode, Volume with Active/Passive Push-Pull, Blend, 3 bands EQ with Push-Pull Mids for frequency (400/800hz) and switch Parallel/Single/Series mode for each pickup Black Hardware (Hipshot A Bridge and Ultralite Tuners) Made in usa in 2002 This bass is used to be mine so I know it, and it’s a very good one in any case. GLWTS

It’s a very good bass, really. More sounds of it, with some RnB’s vibes I played some years ago : https://drive.google.com/file/d/16-I5ZjzClkEWdwJOH1LiwEJmOWeJ_ezE/view?usp=drivesdk GLWTS !

Really beautiful bass ! What are pickups models on it ?

Don’t hesitate to make any offer, trade or straight sale. 🍻

Thank you very much ! 😊

For sale/For Trade a very rare and sumptuous Peavey Cirrus 6, in Tiger Eye finish, from the USA Custom Shop of Peavey with the same specs of Porcaro's one but with 6 strings. This is the first series of Cirrus made by Peavey's custom shop. Those among others that were played on stage and in the studio by Mike Porcaro or John Taylor. This bass is in excellent condition and is with all options. It dates from the early 00's and it cost more than $3500 for a new equivalent model. At the dawn of the 21st century, that was a lot of bucks. The options on it are the maple fingerboard and the Millenium preamp with a mid frequency control. These basses are recognized worldwide for their wonderful qualities. The workmanship is exceptional and the design is full of very ingenious ideas, including : - A graphite reinforcement below the entire fingerboard - A neck with an asymmetrical profile like Tobias basses - A carbon head veneer under the maple veneer to stiffen the assembly and obtain better sustain - Specific pickups at the base for this model then adopted throughout the range, which have a magnetic field directed towards the outside of the pickups, and therefore more precise and dynamic than conventional design PU - Identical pickup placement to Ken Smith basses with humbuckers - A neck in satin finish, and a gloss finish body - A preamp powered by 18V (more headroom/dynamics) - A 35-inch scale length that reinforces the fundamentals of low notes It's just beautiful to look at, the neck is a real highway, and the body bevels are really pronounced which makes the ergonomics just terrific. In my opinion, it is almost impossible to find an instrument as well made and designed in this price range on occasion, the coast of which is slowly starting to rise for this finish in the USA. One or two small farts on the body impossible to photograph, and the rest is almost mint. Here are the complete characteristics of this bass: Body: Mahogany Wings Top: Beautiful quilted maple, in two parts and rather thick Neck: 7 parts bird's eye maple and amaranth, through and with an asymmetrical profile Fingerboard: Very beautiful Maple Trussrod: A 100% functional double action rod, the neck is ultra reliable and rigid with this carbon reinforcement Tuning Machines: Hipshot Ultralite Nut: Brass Inlays: None on the fingerboard, Cirrus abalone inlay at the 12th fret, and abalone Dots on the edge Scale: 35 inches Frets: Nickel/Silver of rather standard size, they are not Jumbo, and condition 9/10 (see photos) Pickups: Two Active Peavey VFLs and Humbuckers Preamp: Preamp 18V Peavey Millenium Knobs: Volume/Balance/Bass/Mids + Mid selector freq/Treble (note that the knobs are made of solid wood) Bridge: Hipshot Type A, currently set to 17mm Finish: Gloss on body and front of headstock, oiled/waxed on back of neck Hardware: Gold Straplock: Schaller The string height at the 12th fret below the B string is currently 2.2mm and 1.85mm below the C string. You can still go down, but for my right hand attack it wiggles a little too much, and I set the neck almost perfectly straight to get a nice growl. It is fitted with 32-130 nickel strings and will be sold with a set of DR Black Beauties in addition. Comes with the original Peavey case in very good condition. Year of manufacture: 2000-2002 Country of manufacture: USA Price: 2500€ A trade could be possible with a fretted or fretless bass, 4 to 6 strings. Just ask me ! In the USA she is rightly named "The Poor Ken Smith Bass". In my opinion, it has nothing to envy them. You will find sound of this bass recorded without any live effects in the sound card right here (I can do more if needed) and all the pics : https://drive.google.com/drive/folders/1-Rg0gtDezYXlaejsx-2VSWiynjRIw5Ry?usp=drive_link A rather nice video made by Lobster: https://www.youtube.com/watch?v=AGqGBSzketI&ab_channel=LowEndLobster Don't hesitate if you have any questions, I can ship without problem and I can move if necessary. See you !

Hello everyone ! For sale/trade a magnificent Leduc Masterpiece 624 from 1992, with the famous Brazilian Rosewood fingerboard from 1895. This bass is sublime, the neck is nicely flamed, and the ash body grain has a truly original "design". This instrument is in excellent general condition, there are just a few light marks on the varnish, but nothing serious and the frets are not marked. The neck is healthy and straight, no complaints. Everything is original on this beautiful Leduc, it is one of the very first with the EL-5 electronics and the phantom coil between the two Benedetti pickups. I am parting with it with regret, but choices have to be made. You can hear it right here: https://drive.google.com/file/d/1OatS5RYv1SOukiTQhs9AOpybFfzcZekZ/view?usp=drivesdk For additional soundclips I can request them without any problem, just ask me. Here are the complete specs of this bass: Body: French Alder Wings Top: N/A Neck: One piece hard rock canadian maple, flammed, neckthrough, thin C profile Fingerboard: Brazilian Rosewood from 1895 Trussrod: 2 double action in perfect shape Tuners: Gotoh Nut: Ebony Inlays: White Dots Scale: 34 inch scale Frets: 24 silver/nickel 9/10 condition Pickups: Leduc/Benedetti single coils with hum-cancelling (phantom coil) Preamp: Leduc/EBS EL-5 9v Knobs: Volume - Blend - Boost/Cut Bass - Boost/Cut Mids/Treble - Switch to activate and deactivate the midrange control on the treble knob. When active, the mids are scooped when the treble is boosted, and are boosted when the treble is cut. Bridge: Leduc aluminium with brass saddles Strings spacing at bridge : 18mm Strings spacing at nut : 9mm Finish: Honey/Orange High Gloss Hardware: Black Straplock: Dunlop The action at the 12th fret below the B string is currently 2mm and 1.2mm below the C string. You can still go down, and I set the neck almost perfectly straight to get a nice growl. Comes with soft case in very good condition. Year of manufacture: 1992 Country of manufacture: France Weight : 4.471kg Price: 2500€ You will find all the photos via this link: https://drive.google.com/drive/folders/1-457aQhtolbWgccYIUEzCPKIpwsEJSsM I can send the bass wherever you want, I'm used to it. Concerning trades I am open, fretted and fretless from 4 to 6 strings, do not hesitate to offer me, in the worst case I will just say no. Do not hesitate if you have any questions and shipping is obviously possible.

For sale/trade a superb Leduc HMP628SF in excellent condition. For those who don't know, it's a Masterpiece Headless Fretless 6 string with 28 positions. If you are looking for a fretless with a very deep sound, lots of presence and depth in the lows-frequencies as well as singing highs without being too aggressive, then this is it. The 1890 Brazilian Rosewood fingerboard is in perfect condition and provides magnificent low mids like a Jazz Bass from the 60s, but with much more advanced craftsmanship and incomparable playing comfort for a 6-string bass. The fact that it is headless allows for perfect balance when playing seated or standing, it is a real pleasure to place your fingers on this instrument without any tiredness. This bass has very few playing marks, no scratches and no buzz to be deplored for an instrument over 30 years old. Here are the characteristics of this Leduc: Body: French Alder Wing Top: N/A Neck: One-piece Canadian hard maple Fingerboard: Brazilian rosewood from 1890 (over 130 years old!) Trussrod: Two single-action rods manufactured by Leduc which function perfectly and allow differential neck adjustment Tuners: Leduc Headless System Nut: Ebony Markers: White dots on the fingerboard and on the side Scale: 34 inches Frets: N/A Pickups: Two Bartolini Original Quad Coil 90P46C Electro: Leduc EL-6 18V 3 Bands with Semi-Parametric Mids Knobs: Volume/Balance/Bass & Stacked Treble/Mids + Frequency Selector/Active-Passive Switch Bridge: Manufactured by Leduc in Aluminum and Bronze saddles Finish: Very pleasant satin varnish Hardware: Black Straplock: Schaller The action at the 12th position under the B string is currently 2.25mm and 1.5mm under the C string. You can still go down, but for my right hand attack it buzz a little too much, and I set the neck almost perfectly straight in the treble and with a slight hollow in the bass to have a nice mwah and a nice presence in the bass. Note the absence of neck issue on this bass, the action at the end of the neck is essentially the same. It is strung with 32-125 steel strings, lightly played, but this gives it a very nice grain. Delivered with the original custom-made case which has been worn but is in good condition and does the job. Year of manufacture: 1990 Country of manufacture: France Weight: 4.3kg Serial Number: 7432-K Price: €2500 negotiable You will find the photos in HD right here: https://drive.google.com/drive/folders/1-IefTDB23cJ3oODjRK0-VfqO5ZQRfWIn For the neck profile it is a very flat and fast D, the opposite of a PB neck. I'm selling it because I prefer the more "modern" fretless, I have a Status which already suits me perfectly so I don't need it. On the other hand, for those who want THE fretless sound that everyone has in mind, it's a killer, with very high-level craft and, above all, instruments that will become rare because Leduc has stopped taking orders. I'm going to make some sound shortly for those who are interested, otherwise go to PM I already have sound on video. Concerning trades I am open, fretted and fretless from 4 to 6 strings, do not hesitate to offer me, in the worst case I will just say no. Do not hesitate if you have any questions and shipping is obviously possible.

Bargain !

Lovely Fodera ! GLWYS !

A very good fretless, resonant, comfortable, lightweight, and balanced. Someone will make a very good deal…

TRADED

Hello everyone ! I am selling some basses to finance a new purchase. Here is a sumptuous Jerzy Drozd Obsession 6-string named The White Walker (slight reference to GoT I imagine). It is in excellent, if not new, condition. The white color is just beautiful and the playing comfort of the neck is extra. The varnish is super soft to the touch and it's a real pleasure to play this bass. On the sound side, we're on something that looks a lot like a big modern Jazz Bass with monstrous lows and a superb growl, a kind of mix between Fbass and MTD. The resonance of the body and in the neck is also a real pleasure. The bass is well balanced and the body shape is really comfortable. Entirely handmade in Spain, these instruments are flawless in finish (those who know know what I'm talking about). You can listen it just here : Passive mode https://drive.google.com/file/d/1x5wQ2HCte81Oqm3usqKagBu5Phh2kqjk/view?usp=drivesdk Active mode https://drive.google.com/file/d/1wy5SzKWXrPvpAaB4_cQl7iGUngfIL0Xi/view?usp=drivesdk In a mix https://drive.google.com/file/d/1eDUWmmpp_Fhpsz4fDwSnGt7BeTd1ZUc4/view?usp=drivesdk Here are the complete characteristics of this bass: Body: Etimoe (Type of Mahogany) Top: N/A Neck: Three pieces of hard rock canadian maple, bolt-on with 7 screws, asymmetrical D profile Fingerboard: Maple Trussrod: 1 fully works double action Tuners : Hipshot Ultralite with D-tuner on B string Nut: Ebony Inlays: N/A Scale: 35 inch scale Frets: 24 silver/nickel 10/10 condition Pickups: Jerzy Drozd JEDSX Single Coils with hum-cancelling Preamp: Aguilar OBP-3 Knobs: Volume - Blend - Passive Tone with active/passive push/pull - Boost/Cut Bass - Boost/Cut Mids - Boost/Cut Treble - Switch for mids 400 or 800Hz Bridge: Jerzy Drozd 24K gold plated Strings spacing at bridge : 19mm Strings spacing at nut : 9mm Finish: Polar White Satin finish, just wonderful to see, and to play (smooth as possible) Hardware: 24K Gold Plated Straplock: Dunlop The action at the 12th fret below the B string is currently 2.2mm and 1.5mm below the C string. You can still go down, and I set the neck almost perfectly straight to get a nice growl. Comes with the original Jerzy Drozd soft case in excellent shape, and papers. Year of manufacture: 2008 Country of manufacture: Spain Weight : 4.611kg Price: 2700€ Negociable You will find all the photos via this link: https://drive.google.com/drive/folders/1-9pmueF3o7NMpS5q5Csv04Cu6RvhZUNE I can send the bass wherever you want, I'm used to it. No trade possible because I am financing a new purchase. We can discuss the price, I am open so do not hesitate and the bass is testable next to Metz on many amps. Submit !

**WITHDRAWN**

**Withdrawn**

Wow, very beautiful Fod. GLWTS ! 🍻