LeperMesiah

Hi all, I have a Music Man Sub original USA made. If the nut needs replaced, will any nut do or will it have to be an Ernie Ball specific one? Cheers guys.

So I recently bought a second hand Musicman Sub Original USA made. Took it to get set up and have a fret dress. Got it back and looked and sounded good, frets levelled etc, action was a little too high so I lowered it at the bridge. Played for a few days and then started to notice buzzing on the G string, mainly when fretted on 9 - 12th frets. So I tried adjusting things further, researched YouTube videos etc. Ended up trying to reset the whole thing and set truss rod and bridge height again. Got it to a place where had nice low action and sounds great, on all the strings except G. Buzzing occurs when fretted on 1st - 12th fret on G string. I have set up heights so all strings are the same (even tried slightly higher on G compared to others) and G still buzzes. I find it odd that all the other strings are fine apart from G even though they are all same height all along fret board (or G even being higher). I have tried a different G string and checked rattling coming from things like tuning pegs etc. Have tried loads of relief and little to no relief. Any advise would be really appreciated thanks. Or even just a good description to setting it up properly, I'm close to useless with this sort of stuff. Cheers guys, help a bass brother out.