ryancowell25

Pictures to follow this evening and i'll tidy up the ad but posted this afternoon if anyone wants to get in quick

A couple of drive related pedals surplus to requirements. Both excellent. [color=#333333]DHA VT1 Drive bass with 12 volt power supply. Good condition[/color] [center]The VT1-MK3-Bass uses a single 12AX7 (ECC83) valve to generate classic pure valve tones. There are two modes of operation, overdrive and clipping distortion which also has 2 separate options of clipping. The VT1-MK3-Bass is a low to medium gain effect and is intended to be used in front of a valve amplifier, but will also work well with solid state amps. The foot switch provides a true by-pass and the LED indicates if the effect is on or off and the cool blue back-light seen via the valve vents indicates the power is on.[/center] [center][font=Verdana, sans-serif][size=3]£50 delivered[/size][/font][/center] [color=#333333]Second is my Tritomnlab FET overdrive. Also in immaculate condition. looking for [b]£80[/b] delivered to your door.[/color] This pedal is based on jFET transistors with an operating voltage of 33 volts (Step-Up converter to 33 volts inside). This high voltage is necessary to obtain a good dynamic characteristics of guitar signal. Many guitar pedals using 9 volts, but with this voltage is not possible to get a good dynamic sound. The use of jFET transistors allowed to enrich the sound of the even harmonics. This makes it sound like a tube preamp and a good signal / noise ratio. All transistors are carefully selected by parameters. [color=#333333][color=#faebd7][size=3][font=Arial, Helvetica, sans-serif][/font][/size][/color][/color]

Blimey this won't last long

Sold

Thanks I've messaged him

bump

Bump - trades considered

[color=#000000]Mesa Flux Drive. Great overdrive and sounds fantastic on bass with no loss of low end.[/color] [color=#000000]Lookking for £100 delivered to your door boxed, in excellent condition with original feet and no velcro on the bottom[/color][list] [*][color=#000000]Dimensions (W/D/H): 2.87" x 4.77" x 2.28" (73mm x 122mm x 58mm)[/color] [*][color=#000000]Weight: 0.802 lbs. (364g) with battery, 0.702 lbs. (319g) without battery[/color] [*][color=#000000]True Bypass Switching[/color] [*][color=#000000]Battery Type: 9VDC (one)[/color] [*][color=#000000]Power Consumption (Current Draw): 9VDC/15mA[/color] [*][color=#000000]External Power Supply (Not Included): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9VDC with a NEGATIVE CENTER plug polarity and a jack plug size of 2.1mm x 5.5mm.[/color] [*][color=#000000]Input Impedance: 1M Ohm (500k Ohm minimum)[/color] [*][color=#000000]Output Impedance: 10k Ohm[/color] [/list] [url="https://www.youtube.com/watch?v=b2qb2UTUtrI"]https://www.youtube....h?v=b2qb2UTUtrI[/url]

SOLD

I'll do this £50 delivered to your door

My Blueberry Bass Overdrive. Looking for £50 delivered While mainly designed for bass guitar, the BBBO can also be used with other instruments for low, dynamically controlled distortion. [b] Controls[/b] VOLUME: controls output DRIVE: sets the amount of distortion and sustain, as well as the type of distortion. Lower settings give dynamically controlled overdrive, the unit distorts more the harder you strike the strings and there is no definite clipping point, but rather different shades of distortion as the amplitude changes. Higher settings will give more compressed sounds. A good starting point with most basses is fully CCW, turn the knob until you find the overdrive level that suits your playing. Lower settings are good for old school tube amplifier tone, while higher settings gives denser distortion. NATURE: is a tonecontrol for filtering and to control what register distorts. Turning CCW gives more lowend and also distortion in the lower registers. Turning CW gives an emphasis in the upper midrange for more protruding solo bass tone. [b] Electrical specification:[/b] • Input impedance approximately 500K Ohms • Recommended load 50K Ohms • Current consumption at 9V approximately 4 mA • Max gain at 1KHz approximately 50 dB • Supply voltage range 8-12V’s • True bypass POWER REQUIREMENTS: 6F22 9V battery or DC eliminator 2.1 mm plug

PM'd

+1 on all of the above. These are stunning things of beauty and loud to boot