PaulThePlug

Exactly this^ I'd like some... Red SR300 with Maida Vale Stacks got Red Foam And the SR400 with DiMarzio Twin Coils

Are Friends Electricians - Gary Numan

I'd go Squier or Harley Benton

Poseto Land - Spirit https://open.spotify.com/album/5khL1LB6EuUDPDxkG2xQPx?si=Vn0_guFKSgaavETWBSEL3Q

Can't think of a better way to start! Basement? Bass Meant! Get a nice fitting screw driver for the machine head screws, and a wipe of candle wax or bar of soap on the threads when refitting. Run a couple of practice cuts outside the area, as different wood will cut different, don't force it, let the tool do the work. Minimal sanding with one of those i think. Steady as she goes...

Strats and Jazz on AliExpress... maybe worth a further look or msg. Lots of pickguard sheet material cheap.

Maida Vale Stacks... DiMarzio Twin Coils Or Entwistle's - Mine are Ceramics, Go Neo's if ya wanna go Bonkers on a Budget. And some Kent Armstrong Vintage Hot lurking...

Maybe a Tonerider Duke? https://tonerider.com/products/the-duke-jazz

What is the finish name, maybe there is an actual paint code for the colour, like cars etc... Good Automotive Spray shop nearby that might be able to 'read' the paint with a machine? - I'd be having a look at car paint touch up pens as the best colour match, at the most cost effective cover up.

Something that makes them want to pick it up, if thats pink, or one with skulls on... often the smaller sizes are still quite deep. How about a small encore type electric? Or a diddy Strat Squier or Harley B type Might be a little easier to fret and get a note to sound and keep the momentum.

Are you gonna go my way? - Lenny Kavitz

Nurse Rozetta - Alice Cooper

No Shared patches or recommended settings in the TonLib forum page?

Jazz Nut Neck from the bay... Nice neck, they tend to be a flatter 12" rather than 9" Ended up getting a fair refund as the Side Dots at the 9th and 12th had been drilled wrong, filled, and re-drilled Also a Jazz Nut Neck from Twin--Cam on the bay

Love the tuners... Black Guard, or maybe something lairy such as purple pearl? Large Jazz Knob for Vol, Small Jazz Knob for tone... Sorted

(Eider)Down Down - Quo

What sort of cost are you thinking? How about one of these https://www.thomann.co.uk/harley_benton_bass_guitar_kit_mb_style.htm

Couple of years back i got a Custom P Body made... Enjoyed the whole Bitsa Experience, so got a custom J Body made... Both are Paulowina for cost, it is a soft wood for dinks. Now defunct or rebranded Luthiers Warehouse / Luthiers Crafts, via the Bay. Got a Jazz Neck from Twin--Cam on the bay. There is a company Wild Rainbow Music on the bay, might be worth dropping them a line.

From the packaging i suspect Olympia, similar to Adagio 45-100 Std Tension https://www.thomann.co.uk/harley_benton_hqs_bass_45_100_flatwound.htm

Nice...

Fire Engine Red Leicester - Grid Ft. Zodiac Mindwarp and Robert Fripo.... TUNE!

New plate, screws, pots, jack 'n pup, lift the bridge and slide out the earth wire then no solder has been touched and completely reversable Enjoy!

Gotoh GB9?

I vaguely recall see some long stem. Think they were Gyker. I'll retrace my steps and see what i can find... vaguelyvremember seeing em and thinking 'mmm, Nice...' Twas these i liked... https://www.guyker.com/en-gb/products/tuning-key-machine-head-1-26-ratio-for-electric-guitar-bass