PaulThePlug

Loving the Big Poles... I'm also interested in J bezzles/surrounds for my Ibby J's 3D Printing anyone? Those Chicken Heads would look kinda mad, in a good way!

Pic?

Miffed with Alesis... Got my Son a Second Hand Alesis Nitro Mesh eDrum Kit After a few months of enthusiastic playing the Snare failed... Broken wire on the Piezo... Real fragile, brittle almost glass like wire and insulation. Re-soldered several times until both wire failed... Contacted Alesis about getting a replacement Piezo, or the Spec. Nope... Can't help and recommend i replace the whole Snare 'Pad' at £57 + vat + £6 p&p... Needless to say, at £75ish he has no snare at the mo... EDIT: Alesis are sorting me a B Stock Unit at £35 all in... Happy-ish with that, hopefully comes with G'tee..

Rock Music is a abomination?... So is the Handwriting!

Rounds or Flats? Adagio - Nickel (£18) https://www.ebay.co.uk/itm/332636490116?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=k9thgGIYSEG&sssrc=4429486&ssuid=daj_hJ6fSo-&var=&widget_ver=artemis&media=COPY or Olympia - Stainless Steel (£16 offer) https://www.ebay.co.uk/itm/302719180784?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=xj847H30SH-&sssrc=4429486&ssuid=daj_hJ6fSo-&var=&widget_ver=artemis&media=COPY Flats are worth a try if never used Flats... And for the £... Tonerider.

Hard Hobbit to Break - Chicago

Pics please... #1 If Tort plate change it 😉 #2 Your Strings? #3 What sort of Sound/Tone ya after - Vintage Warm / Clean and Articulate / Loads of GO? #4 Budget Funk plate from Aliexpress - under a tenner... Pickups, Kent Armstrong £60ish, Tonerider £40ish and an aftermarket 'go to', Wilkinson £25ish... If ya more Loads of GO maybe an Entwistle PBXN 'Neo' or a SD Quarter Pounder... Check the FS section on here... But, these are changes, not always improvements - apart from swapping a tort plate - Clean-up, New Strings and some time setting it up yourself... would be the place to start. Enjoy and pics please...

The Joyo Ironman series of pedaks came with both a rubber and velcro hook/scratchy to stick on the bottom Presumption would be the board woykd have the loop/smooth

Mad John - Small Faces...

And theft if ya turn ya back or it needs to be left unattended at any time. Maybe take a plainer carrier bag, tote bag or sports direct bag, in one of it's pockets to put it in...

Flying Teapot - Gong

Black Saab-ath...

P...P...P...Pick(!)-up-a-Plectrum..

And the E usually goes towards the A, even on a J...

Same here / hear... In my SR600. Reverse P in a Soapbar, not a Full Width Humbucker as often asumed and compared with.

Overtones, Chorusing? Maybe pickup Height, High Mag Field stifeling the G string... other strings with higher mass are less susceptible. Try dropping the pickup way-down on the G side? - count the turns so you can put it back...

Deadspots n stuff... not a lot to do Other stuff that may be more pronounced at a given freq? Check all Neck/Body Screws (Slacken and Tighten with a bit of string tension is OK, may help to Seat the neck to the back of the pocket) Bridge Mounting Screws, Tuner Mounting Screws and Tuner Peg Screws and String Retainers.. Just a nice Nip-Up Twisted String, Witness Points at Bridge and Nut? Maybe try a Rizla paper in the nut slot and/or Bridge Saddle?

Heart tuners are kinda cute... nice on a Shell Pink P or J Rest is Bobbinz... https://www.ebay.co.uk/itm/196096730486?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CkguqlEPQQ6&sssrc=4429486&ssuid=daj_hJ6fSo-&var=&widget_ver=artemis&media=COPY

I take it back... and tried to with a sneaky edit! From the Ibby Site, Support, Catalogues http://www.hoshinogakki.co.jp/pdf/ibanez/catalog/1995EU.pdf

More bridge pics...

Dunno what they should look like, but looks like they fit, or have been modded to fit ala Strat - Secured on the underside of the pick guard, with 2 screws thru for hight adjust, rather than screwed to the body ala P or J. Maybe the silicone and plate was to try and hold the windings in the covers, rather than foam under Must admit i was surprised when i realised that P pups were not fitted like a Strat, as that is what i came across first.

Mornin... Do you want to turn that down a touch... 'tis early... 😉

Expensive, albeit a very nice Parts-Bin Special. The Options and Build Guide makes interesting reading. I'm sure @Andyjr1515 could custom veneer a J body... I likes Quilted... then Fender Hi Mass Bridge, Bell Plate, Tone Riders or Kent Armstrongs - I'd go PJ 😉