PaulThePlug

^ I get that... but will confirm the contact and 'fussy' Jack plug length... Those sockets usually come with 2 or 3 red fiber washers to use depending on chassis thickness... i think the star grounding washer - although a great idea and design touch, may just of made the jack requirement a little long... Hence take the chrome nut off to feel how a jack seats...

Looks like a lot of white bushing... With the lid off try a plug, then remove the chrome nut and try again... I recon its the depth of socket / jack

I'm thinking that the 0.3 may now be a little thick to conform... but was worried 0.2 might just be like thick foil... Waiting on some dremmel cutting wheel to take the most off before glueing...

DiMarzio Model J...

When he's at school I'm gonna change EVERYTHING to Cowbell... If i can work out the tech!..

Too much pressure and/or time tends to scallop the wood between frets... I get my wife to order these from... https://www.shein.co.uk/10pcs-Color-Block-Nail-Buffer-Sanding-Block-Files-Sponge-Nail-Polisher-Professional-Manicure-Tools-For-Acrylic-Nails-Care-For-Optimum-Natural-Nail-Care-p-13049383-cat-3335.html As She buys a lot of tat from there... Superdrug, Boots etc... https://amzn.eu/d/aaaAOm3 4 sides of different grade... great for a Neck Edge, Fret End, Fret Polish and Buff... all in one...

Ground Hogs... Cherry Red... Waiting on the Pickup Foam to arrive to finish an Ibby SR400 Passive Jazz Conversion... I got slapped in the Faceache by a Westfield ES355-alike... I loves a cheeky bargain Clean-up, and now Strung-up with Olympia 10-48 Flatwounds inc a wound 3rd... oh luverly!.. Should sound nice with some old School Fuzz...

Adagio or Olympia..

Loom sorted... A500k Vol, MN500k Blend, B250k & 0.033uf Tone... as per DiMarzio recommended values - although I opted for a Linear Tone pot rather than Taper.

Ibby SR 305... and take the pre-out... re-wire VBT with existing pick-ups...

Depends if you are happy drilling holes? 13 v 11 etc... there are a few on Aliexpress - neck truss as well so watch out... quality is good... This on my Aria Pro Jazz to PJ...

I'm Red/Green Colour Blind... Red and Green does the 'stand-off' or 'behind' thing with my eyes... The Green Pearl looks Wonderful - nice with the maple neck. https://a.aliexpress.com/_mO7snGC

Son had mentioned the sound of metal-on-metal, like a lap guitar or slide... Happened upon this a couple of weeks back... Mistreated Harley Benton... Frets have been removed... Freebie... ...and a little crack in the back of the neck by the headstock... superglue-d... 0.3mm x 10cm x 1m Stainless Shim... £5 Aliexpress... Gotta cut down, glue, trim, and dress...

...or something 3D printed... ...OK, It was just an excuse to post my P Bitsa with a Maida Vale Alnico IV Split P again

I'll let if go this time... looks good Little shim in the back of the neck pocket, slither of wood, bit of sandpaper... don't take much. Just goes to show what a bit of luck and a few hours arsing about can do...

Tune!.. Some Great stuff by 10cc... Getting my Son to listen to some 10cc and Alan Parsons... I swap stuff every couple of months on his MP3 for his walk to school...

^ Any hole under the pickguard?

You have the Out going to the jack Ring contact instead of the Tip contact...

These arrived today... thanks to @shoulderpet DiMarzio DP123 Model J Set... look quite 'Moody' with the Hex Poles... Twin coil... for the Silent Treatment... Still after some Grey or Black foam though... Anyone? 😉

@robbo400 I was persuaded against the semi-hollows as a beginner ... But you fancy a Hollow Body... or HB ...didn't want to spend a significant amount on something that I couldn't get on with. Whereas in today's mad world of mixed up priorities and rip-off costs, I can justify taking a punt on the Harley-Benton... Loads before you have taken the 'Harley Benton Punt'... I loves my HBO-850 Acoustic Bass... You should not be disappointed as all they need is a little tickle... ...lucky to know a luthier fairly well... Thats that bit sorted then ...if I have to write it off/sell at a loss as it is literally the price of 2 parking tickets... Who are you trying to convince?.. Yourself or your partner? Us lot on Basschat are already sold on the idea... Harley Benton or HB Hollow Body or HB... Which colour? If not seen, LP Shape ya say?.. i find this very nice... but a 34" https://www.gear4music.com/Guitar-and-Bass/Greg-Bennett-Royale-RLB-3-Bass-Guitar-Sunburst/1IC7 Or this for less, again a 34" https://www.gear4music.com/Guitar-and-Bass/San-Francisco-Semi-Acoustic-Bass-by-Gear4music-Wine-Red/1ICK

^ little dribble of glue (in the hole -not top surface as it may effect the oil finish...) must have a suitable shard from ya chiselin'?..

Prolly not as the foam you have is full surface, between the feet, and ss long as the foam it not compressed easy enough for the feet to contact the floor. The board would be to ensure the feet don't just dig in to the foam...

Good Darts!... Just had the Hand-drill out for pickup mounting screw pilots...

Bring it on home - Led Zep