PaulThePlug

Mmm... what could possibly go wrong?.. Let's 'ave some 'oles... I might be a while....

Hold my Beer... were goin' in Armed only with a wobbly-wirry and a 7mm flat bottom drill, biggest that will go in the wobbly's chuck... Oh for a pillar drill... Might be a while taking all these down 8mm...

Anyone BR6ish with a router and knows how to use it? Help!.. Need a Channel routed in a pickup cavity x2 - 18mm-ish wide, length of existing cavity, to a depth of 8mm... ...so i can fit Extra Deep, Stack Coil Jazz Pickups... channel is to take the lower coil, not for the cover. ...to look like this when finished... ...and save me, and the Bass from this kinda thing...

Gloss black is often a problem... I like the idea of flattening to matte with a couple more grades of sandpaper... Then i'd leave it... even matte lacquer can spot and ripple... What about the headstock end? I've had a few decals done via the bay... so much easier than eaterslides...

Snag City, Arizona!.. Pickups are a monster 27mm deep in their covers - Cavity is 18mm deep... So I need a channel routed about 8mm deep - to allow for a bit of wire-out, bit of thin foam and some height adjust room for the pickups... 18mm wide - for the lower winding to fit in, but with the pickup cover ears to screw on to the ledge - and the Length of the existing cavity - to allow for the pickup wire-out and down the hole to the control cavity... Woke up in a Cold Sweat recalling my last attempt... Gonna put out a plea for someone to save me, from myself... Gotta get this sorted as i'm in £ for the pickups and donor SR... plus it's going to look and hopefully sound and play soooooo good!

^ and if their is an issue GG may give you an idea!.. Sounds like the perfect plan... although before ya spend, i'd be looking second hand local or on here... Bang for 80' Shillings and all that Before ya go... still no pictures?.. there are rules ya know... Never knew Woody Allen played bass...

More likely the spring contacts inside the barrel - don't think the contacts are accessible to close up... Active? Stereo Jack as a Switch?

I got a funny one...

U.N.C.L.E - Illya Kuryakin

Oh the joy of FBMP... Alesis Nitro Mesh Kit. Son is lucky boy...

No Black... and the red is a little to... for me, nice though. That Honey does look sweet... Just noticed the rounded fretboard ends... the little things...

@dawnrazor667... care to share the specs? - a pic of a spec list if easy. They do look so good... how thick?

Have you thought about, if these don't get released? - and those that have fettled a HB know... 🙂

Chicken Head looks sweet, not sure on the Speed Knobs... maybe some thing more 'Cooker style' Couple of cheap poker chip and land rover switch bezel types on the bay... That is real nice... and one-of-a-kind wow!.. Can you get cream or white MM covers? To tie in the binding and f hole edging, nut etc...

SR600-SR300-SR300J-SR300P-EDB700 The two GSR200 are sleeping, it's way past their bed time... Shush...

My revamp of a Joyo British.. ...and a Behriger Beady-Eye

Not an SR this time... EDB700

Even if ya like ya specials... for all the occasional odds 'n sods... Zoom B1on or B1Four?

Feed a length of plastic tubing 6mm ID down the pot hole, up thru the f hole... Then put the end of the tubing over the splined plopped, then pull through the control hole... Might still be able to slide the washer and nut over the tube... Can you post details or link to the switch?

Some dappled-daylight sunny-moody pics... Yep... It really is that nice...

So... What Strings for a bit of Slap 'n Tickle?.. Makes Sense as my Son is inquisitive, along with his Fretless.

Clean and Beeswax Buff... Maple Body, Transparent Black Flat TKF Finish... Po(o)p Scoop...