PaulThePlug

Wadded Top, Back and Bottom with an off-cut strip after doing the still not working SWR Washing Machine... Then off-cuts of the off-cut for the sides. Should smooth the sound out a little a make it a bit less box-like... wadding reduces standing waves, and mid domination and also makes the cab sound larger...

There is also a white one...

Us and Them... Floyd Lot (by Simply Dan and others...) at the Beaverwood in Chislehurst on the 11th Jan for Mrs Plug's birthday

Black Charade... a My Chemical Romance tribute band, eldest is a big MCR fan, took the youngest as well. The Tonbridge Wells Forum was alive!

Just use double sided.. you can take them off when the hangover subsides...

Double bass arrived... Much smaller than it looked in the pics to my blurry eyes, and half the body is missing.... Don't eBay Drunk... ... Should give the Youngling a challenge and build on his ear with the fretless bass. Plus, I'm a BIG Hawkwind fan, so can't wait to hear it thru the Fuzz, Wah Wah, Phaser and Delay of the pedal board... Man! As neither me or my Son have a clue about such things... strings on order. Any sage advice or blah blah most welcome.

Nice... Got the Son a Melodica a while back... got a link?

I rather like it... Filled Fretless, some Adagio flats and Sorted... Nice corner noodler....and love the work bench...

Dunno got SH... But looks like this with the two thumb wheel screws each end https://amzn.eu/d/afuw30X You will need another couple of inches when slotting in (stop it...) and the extra length (i said stop it...) of bass neck means the stand has to be further from the wall. Spacers on the shelf wall battens sounds like a plan.

43 for the SR's... 44 for the Ps 'n Js

Nice.. nothing like a little something and a fumble to fall in love again...

0.1 arrived... Tried to adjust the truss rod to lessen the relief and flatten the neck before sticking on the shim steel... No Joy... opened up the super glued crack... So 101 Hard as Nails... ...and on with the shim steel... Its steel down on the foam rubber garage mats with a box of books on top. Hopefully the thin shim will conform to the fretboard radius. Then a sand of the shim over-edges to the fretboard. Fingers crossed!

Really interesting post... My Son is looking at...

Nice in Nice - Stranglers...

Would you of chosen that one over another?.. Back it goes... Would you of had that one at £850? A place to start?

47 something capacitance thing... green it was...

Bra-bar' Ann - Beach Boys

Some Blah Blah... https://contact.bartolini.net/support/solutions/articles/5000587194-ibanez-basses-pickups-and-electronics

My Ibby SR600 and others of the time Court etc had the Mk1 licenced Barts, these are a Reverse P in a Soap Bar. Sure about being Mk2?

Got a Tonerider in my SR300 Passive P... Great Tone and Authority... Might i suggest a look at the wiring, cap value... 47uf... and pots? If ya got a spare £5 i cannot rate the Pure Tone Jack sockets highly enough.

Faceache and a Cheeky offer of £15... Took the front badge off 'cos it's mahoosive on such a diddy combo... I'm sure it was obstructing the speaker... and now looks all the sleeker. Had the driver out and stuck a bit of left over wadding in. Doubt the 8" driver is 5 String Friendly, Fine with a Four... Remarkably useable single Tone control... Quite Sweet-Sounding with the Fretless...

If ya don't want the Outline Packing foam ;-).. I want some surrounds for my SR400 with Dimarzio 123's... Here is my SR300 Maida Vale Stacked J's...

0000 wire wool and lemon oil for a clean and condition... 0000 wire wool and furniture wax for a polish... Dremel and a mop with a dab of autosol if frets grained and grubby w/ fretboard guard shim to give the frets a go Then one of the 4 Sided Nail Polish bricks... down thru the graded sides. https://www.boots.com/boots-4-way-buffer-10278878 Then a light Microfiber clothing... An enjoyable hour with a pint or jack 'n coke...