PaulThePlug

Blocks... on a P... I thought they were the reserve of a J?

^ was he the big fella from X Factor?

Just 'lost it' at Pipers Grip... how juvenile of me.

Jesus.. thats a big vape or connects to a Dustbin sized bong.. I might have to nip out to the shed, A Team Style...

Pilot Holes... Hole Deeper than the screw... Say a Machine Head Screw, drill the depth from the screw point, to the underside of the head... when you secure the machine head there will be a fraction of hole left of the machine head thickness... Same for the bridge... just make sure the hole doesn't go all the way through. If the hole isn't deep enough, it will bottom out and you will strip the head. As for hole size... drill should be the size (dia) of the shank of the screw, thats less the threads, to small and it will be too tight, rounding the head it, too big and there will not be enough bite for the threads... this can depend on the hardness of the wood, I recommend a try in a scrap piece of wood. Screwdriver... Cross head screws differ... Pozi, Phillips and JTS. Use a good fitting screwdriver i also use a layer of plastic sandwich bag between screwdriver tip and screw (bolt head to socket...) to protect the finish.

Have you got continuity between pickup cavity and control cavity? Yep... worthwhile having tape that covers the holes, that way the pots are earthed... to the cavity screen, even if you are running a signal earth between them.

Old Candle or Solid Soap Bar... Make sure ya pilot holes are deep enough, and the correct size - I'm looking at you headstock wiv ya machine heads and rounded head screws...

Nice... feels like i'm with you on your journey... and it has a casual air about it. Love the 3 spots on the forearm contour... pre-worn smooth spots...

Recovery & Keytar... Take it Steady Eddie...

See whats local Gumtree, Face Ache etc... for Bass and Amps...

Not that critical, but can make teeth itch... Often as the screws have gone in at an angle, or how the foam is beneath the pup, or has a wire under one side. I go foam on pickup and make sure wires are pushed down the sides...

Artec QTP £13 Passive 5 Position Tone Switch, 4 R/C combinations, plus by-pass. Simple install, but 9mm mounting hole... https://spartanmusic.co.uk/products/artec-electronics-sound-controller-circuits

POSTED OUT OF TURN... But it's a great tune! Human Cannon Ball - Webb Wider

WTAF!..

I think the string spacer at the bridge is a Spark Plug Nipple... Om my he's certainly fücķèdthenut...

I'd send some pics to Uncle Ernie... You might get a freebie... I'd also be returning them just in case... I had similar feelings about a set of Dumlops from the bay... Sent pics to Dunlop who confirmed it was just older style packaging...

#1 Get with what ya got... whats wrong? #2 Machine Heads... Lube worm 'n gear with coppaslip, or something lightly abrasive... toothpaste... and turn n turn to clean n clear flashing and help with fit... then clean off and lube with vaseline... smoother? #3 Bridge... nice A2 stainless saddle height screws, correct height, 8s and 10s mm? So the ends don't cut ya palm... light thread lock on the the threads... Spaldings Fasteners... couple of quid. #4 'lectrics... Loom, I likes the Artec QTP instead of a tone pot... Vol Pot... Quality Wire... Alnico Pickup, Wilkinson £25... Tonerider £40... Kent Armstrong £55. #5 Strings... Roundd or Flats... I likes the Adagio Flats Bargain at £15. #6 All set-up to suit you (sir!) Can't beat a cheapy running at it's full potential...

Didn't he experiment with headless?

Passive... Have a look at the Artec QTP (stellatone-a-thing...) for a Passive Tone Control... bit more 'scope' than a pot 'n 47u...

Tried the BDI Mid Mod? A 10k resistor simply soldered to the back of the board... Top C19 to Bottom R16. Make sure the resistor leads don't touch other components.

Whats the Bass? Move, or add a strap button to the neck heel / back of pocket... SG style, it moves the bass round, and hang more central, but nut will be further away... I want to turn up some neck plate screws that have a strap button on the end... 'Prolly best with a machine thread in to neck collet nut inserts...

Alone Again Or - The Damned