PaulThePlug

Marshall... might have sections of the fake wall for hire... from the looks they are about 6" thick but full height stacks!

Quark, Strangeness and Charm - Hawkwind

All-Good... I purchased and fitted the pickup, was previously fitted, so secondhand... the pics in the post above are mine after i recieved it, but markings were also shown in the listings... no issue etc with seller. In the above post is also the response from Tonerider, so All-Good. Post was for info incase others have or stumble across engraved bobbins etc.

Have you got a bit big enough for a scratch plate?.. Get rid of that nasty tort... 😉

sonicake, donner and a couple of others make a mini Vol / Wah... all the same i think, same gubbins different lable. I have the Donner version, definatly useable.

^ Luverly...

lead foot passive... vol wah needs power to work as either... do you have a board of other pedals for power?

Should be OK if you have a good pillar drill set up to centre the drill and go steady... Half depth from each side... Got a scrap of wood to go 12 > 18 as a test. Trying to 'Go-Again' with a flat bottom drill may have issues... again bit of scrap to practice. Tapered Reamer to clear most (from both sides) then finish with the 12mm?

Poison - Motorhead

^ Prefer Lemmy's more articulate Lead Bass tones from his Hawkwind days... Another for me is Burke Shelly... love a bit of driving P but also quite deft on the phrasing and runs... Budgie!

couple of strips of 2x2... Although might boom like a MF in an alcove up against the wall... check regular for cracks!

corner riser blocks... get the vent of the floor by a couple of inches?

Tie a Black Mini Round The Old Oak Tree - Marc Bolan

Ibby SR... Luverly... Just get a new UK mains lead rather than a dodgy converter... If the Amp was new, give the shop a shout, they might have a spare... UK sales should be sold with the correct lead...

Tears on my Pilau - Various...

Vindaloo - Fat Less...

Big Q?.. Whats the weight? There are also a couple of cheapy Bax / Fazley's id like... but i'm told i've got too many... It's only 8!

Have you tried the Aphex Punch OptComp?.. The compressors... DBX D160 and D Comp (MXR) are also worth a little look.

Deeply Dippy - Right Said Fred...

I would love to have the ears for fretless playing... Big Respect to those that do.

got a zoom b1... likes the CoronaTri... but like it subtle...

Do uprights, doublebass have any fretboard reference? Straight bridge so all about finger position, also higher action?.. Fretless bass even unlined... do they all tend to have a ref or fret position mimic, dot or mark at the fret, rather than in between? so some sort of bridge intonation would be requiered to play by dot rather than ear?.. Correct?