Baloney Balderdash

I already played with that in PhotoShop, cause I had the same thought, but looks really weird. Like too much going on and ruining the symmetrical balance. What did look great though was just having a stripe of red in the middle of the two pickup halves respectively, instead of covering completely as it is now, like a single red strip of tape going across the two pickup halves respectively along the line of pole pieces, but I have run out of red electrical tape, so will have to wait with trying that out in practice till I get restocked.

No, I just have a really old crappy digital camera that makes post editing necessary if I want to make my shots look remotely decent, which is not always equally easy and not always unequivocally successful or without compromises either. And for some strange reason, as you can probably tell from the shots I posted here I get best and most authentically (authentic in relation to the actual motive that is) looking photos with the camera turned downwards, shotting from above at my motive lying flat bellow it. Whenever I try to take pictures horizontally, with the camera in regular orientation, as you normally would, the shots always end up looking very off, like the lighting and colors being completely off and the picture also lacking details and depth, compared to the motive I am photographing (I suppose it could very well be a tradeoff of the camera trying to keep everything in it's line of shot/sight sharp and in focus).

So this is what I decided for, for now at least, luckily it is quite easy to change, should I change my mind:

I know, I just wasn't sure that was what originally was written, thanks for clarifying though.

Well, the effects of the B1Xon (I also own a backup G1Xon, and a G1on, and a MS70-CDR, which features the same generation Zoom effect models as the G1 and B1 (X)on, as well as a G1 Four and B1 Four, so I actually know what I am talking about) are much more tweakable and customizable (beside just generally sounding better in my opinion), and you can assign the build in expression pedal, which is actually really great and responsive, to control any one parameter of any one effect of each given patch (as well as of course master input or output volume for each patch), instead of being limited to only being able to control, what 5? or something like that, expression pedal specific effects, as it is on the B1X Four. Also there's no signal loss or tone suck on the B1Xon, when bypassed you get the same signal you feed it with, no coloration, unlike what I experienced with my B1 and G1 Four (which both now lives in a drawer, unlikely to ever see use again), so no need of a master EQ and volume control, on the B1Xon you can even set the volume both for each individual effect in a patch but also master for the whole patch (which as said also can be assigned to be controlled physically by the build in expression pedal). Also I've experience no unwanted noise with my B1Xon (I do feed it from a power supply with isolated and filtered outlets though). So I would say those "advantages" of the B1X Four (controls that allows you to make up for tone suck and coloration from the units bypass in the first place, and more accurate tuner, which most people will have a dedicated pedal for anyway, and certainly wouldn't need to be more accurate than the B1Xon for live use, plenty accurate for that use, and again by far most people using a separate more precise tuner for setting intonation, serious recordings e.t.c) are by far overshadowed by the advantages of the B1Xon, real advantages might I add.

I still don't get it... Cocked wah? Or? I feel sorry for people named "Richard", actually my uncle's name is "Richard" (that's not his name though, thanks profanity filter for discriminating people named "Richard", like they wouldn't already have insecurities about their name, and I doubt having it straight out censored will make them feel any better about it). At least my uncle's middle and last name is not Willy Johnson.

Oh, please, would you stop apologizing! If it sounds and plays great it sounds and plays great. Don't listen with your eyes and wallet, use your ears! Weight sure ain't where it is at either, and the fact that it is light weight doesn't make it a toy. I am sick of people who seems unable not to mention short scale and toy in the same sentence! Where does the messed up idea that if your hands and shoulders doesn't hurt after playing an instrument it must somehow be a lesser instrument come from? An instrument being easier and less straining to play ought to be an advantage and make it a better instrument, not lesser, and certainly not a toy. And several high end basses got basswood bodies, which is both a very light and a very cheap wood. The price of wood is all about availability not about it's quality as wood for instruments. Edit!!: A testament to my grumpiness.... A bit too early just yet to call me a grumpy old man, but if it continues this way.... Yikes!

So I can't quite decide what looks best, the knobs on my bass with or without green electrical tape (also known as insulating tape), or perhaps as the paintshopped photo with respectively green and red electrical tape, applied. So beside the first image being of lower quality than the two other, which do you think looks best? Hopefully you opinion will help me decide. I should perhaps add that this is an Ibanez Mikro Bass, which has been my main instrument of choice for quite some time. Knobs ala au natural : Knobs with green electrical tape applied : Knobs with one of the two knobs having been edited in Paintshop to be red (respectively green and red electrical tape applied to the two knobs) :

I have experience with both picks, the .73mm regular Nylon might be ever so slightly more flexible than the orange .60mm Tortext, but kind of hard to judge as it is sort of a different feel all together, being a different material, softer, and thicker, it simply reacts differently. The Max Grip .73mm Nylon for some strange reason is slightly stiffer than the regular .73mm Nylon one, which might make the former more similar in flexibility to the .60mm Tortex one. Still be aware that even if it is a close match in terms of flexibility alone as said it reacts and feels a bit differently all together. But yes, Nylon picks definitely gives a slightly rounder/warmer, less clicky, tone, but while still giving that specific snappy emphasis on the attack that is unique to playing with a pick.

The Dreamer is Still Asleep - by Coil

I always thought I hated flanger, cause I wrongly associated it with only being able to produce over the top metallic jet plane noises. However a couple of years ago I unexpectedly got my Monarch MFL-22 Stereo Flanger (a rebrand of the Arion SFL-1 one) back, after having borrowed it to a friend way back and forgetting all about it, originally having bought it used in a deal together with a Monarch chorus and phaser in the same series of pedals (also Arion rebrands) sometime around the mid 90's for pretty much peanuts, something like less than half of what just one of those pedals goes for used now for all 3 pedals together. I figured I might as well try it and was surprised with how nice it actually sounded. Capable of some really beautifully shimmering bubbling modulation with a subtle vocal like quality, or more abstract, but perhaps more saying about the character of this effect, akin to carbonated spring water. It's currently on my main board, placed in one of the effects loops of a Boss LS-2, and either blended with clean signal in about equal measures, giving the effect described above, at the same time subtle and very precent, like not blurring the original signal at all, as pronounced modulation effects otherwise can have a tendency to, or mixed with a phaser, placed in the other effect loop of the LS-2, giving a really pronounced and very psychedelic deep swirly swooshing effect with a somewhat quacking quality, and a somewhat mystical oriental vibe to it. Actually this flanger has even become my absolute number one favorite modulation effect, and I actually think flanger works particularly well with bass. And if I was only allowed to have one modulation effect this would be it. This is how it looks, not my unit though, just a random Google image (and don't let the plastic housing fool you, it is proper Made in Japan quality, and the fact that mine still works flawlessly, despite being a pedal from the late 80's, and the fact that my unit has seen a fair share of abuse, ought to speak for it self. And as said sounding absolutely astonishing): I do plan on acquiring a Boss BF-2 clone, probably the TC Electronic Thunderstorm one, and an EHX Electric Mistress clone, probably the Mooer E-Lady, at some point, cause I also really like how those sound, but I still very much doubt either of those will knock the Monarch off my board.

Ibanez GSRM20B Mikro Bass! Just 28.6" scale length.

I didn't seem to be able to spot you mentioning the size of the speaker unit in this, so what is it?

I don't think anyone claimed them to be diametrically opposite, they are related, but there is a reason that there are several words that means only slightly different things, it's in the semantic nuances. Synonymous words while similar semantically are often not entirely identical so while two synonyms will share a majority of annotations and connotations, some would be differently weighted as well as some would still be completely unique to either respectively. "Oomph" for instance would suggest "punch" to a much higher degree than "heft" necessarily would. "Oomph" to a higher degree suggests "impact", where "heft" to a higher degree suggests "weight/mass", they are of course that way very closely related, I suppose you could say two aspects of the same phenomena, but with main focus on two different aspects of that same phenomena, and while it is actually possible to imagine contexts where you would have one without the other. While this might seem like nitpicking what it really is is just addressing the importance of clear communication as most people are in fact not mind readers.

Geddy Lee too, at least in later years. Though Geddy does make quite frequent use of that flamenco style inspired finger flicking technique I mentioned in my initial reply in this thread. Still doesn't really sound like they are playing with a pick.

Nothing else than a pick will give you that unique snappy emphasis on the attack. The EHX Steel Leather pedal was made with helping being able to get closer to a pick tone while using you fingers in mind, essentially helping with emphasize the attack, as is the main characteristic of pick playing, as described above. But again, while that might help you get closer, it won't really sound like a pick. Getting an EHX Steel Leather pedal and learning how to utilize the flamenco inspired index and/or middle finger flicking technique would probably be your best bet though. A regular compressor with just the right settings can do a somewhat similar thing though, the trick is to dial in just exactly sufficient attack time to let the transient of your attack fully through unaffected (I'd say just about 30ms or so ought to work well), then following have the compressor cramp down the signal a bit immediately after, just a bit, you wouldn't really want a very high compression ratio, the release time needs to not be set too long either, that is relatively short, but not too short either, and it helps with a hard knee as well, for the cramp down of the signal to happen as fast and steep as possible immediately after the full transient of the attack initially has been passed through unaffected, all to emphasize the attack (but not too extremely so, for it to still sound natural), like a pick would do (experiment with the threshold value of the compressor). And using an equalizer pedal to slightly boost a center frequency of 1kHz or so (experiment with a center frequency from around 800Hz to about 1.2kHz) with a relatively narrow bandwidth/high Q value will help with emphasizing the attack too (again a huge boost is not desirable, a slight boost will do, in order for it to still sound natural).

I do realize that this is probably more circumstantial than what OP likely would want to through, but since everyone else is coming with examples from their own setup: Mixing drives in parallel really opens up for some totally unique distortion tones that one wouldn't be able to achieve otherwise, and adds a certain extra depth (or dimension, if you will) to the distorted tone that wouldn't be obtainable any other way (well except bi-amping, I guess, but then again that is essentially the same thing, more or less). I got a really massively ballsy and monstrously heavy distortion tone, that still is surprising well articulate and well defined considering, and also have this unique extra layer of depth to it, by running my bass signal with an added 1 octave up, via a customized Toneprint on my TC Electronic Sub'N'Up Mini, into a Boss LS-2 with a Mosky Black Rat RAT clone, in Turbo RAT mode, dialed in with a relatively high gain setting, in one of the effect loops, mixing it in parallel at about equal measures with a Joyo American Sound (other upper mids focused overdrive pedals could work as well), dialed in with the upper mids boosted some, pre gain stage, and to just on the verge of breakup, stacked into a Boss MT-2 Metal Zone, dialed in with a relatively moderate gain setting. I really love how this sounds, as said massively ballsy and monstrously heavy distortion tone, that still is surprising well articulate and well defined considering how raunchy and massive this sounds, as well as having this extra layer of depth to it, not obtainable by other means than mixing two different drives in parallel. As far as I am concerned this is the absolute perfect high gain distortion/fuzz when such is needed for doomy stuff. And I'd imagine using something like the EHX Switchblade Pro Deluxe, instead of a Boss LS-2, which would allow for additionally blending in clean/dry signal, or in this case {dry+1 octave up} signal, with the two drives mixed in parallel, would give additional clarity and articulation if needed without really compromising the massive heavy and ballsy -ness of it. In any case a pedal that allows for blending drives in parallel or eventual with clean/dry signal, like for instance the Boss LS-2, which would allow for either blending two drives in parallel, or blending one drive with clean/dry signal, or the EHX Switchblade Pro Deluxe, which would allow for both two drives blended in parallel, and additionally blending in clean/dry signal, would absolutely be recommendable for retaining bottom end and increased definition and articulation, which otherwise easily can get lost when using drive pedals, especially high gain ones, on bass, and otherwise adding an extra layer of depth to the drive, only obtainable by blending two different drives in parallel.

Time to bump this thread, and doing so by showing off my Ibanez GSRM20 neck + GSRM20B body Mikro Bass (which can also be seen standing in a corner to the right of the OP photo), also with a Jack Skellington skull sticker, as well as some red and green electrical tape, but also some of the tiny "The Scream" inspired stickers that came with a Sherman Filterbank 2 I once owned, but which I unfortunately was stupid enough to sell at some point, applied to the headstock.

I actually plan on getting me one of those small mallets, one with a wooden or hard rubber head, that you use for Orff instruments, like glockenspiel, xylophones and metalophones, to do something similar, though rather than a slap type sound, as in this video, I plan to use it for replicating a dulcimer like sound on my bass. Also looking into getting some kind of slide, there's a particular one that I am having a keen eye on and ponder on acquiring that you fit on the finger as sort of like a heavy thick ring with a clamp that keeps it in place, that allows you to play fairly normally when not using it as a slide, and kind of fits perfectly for only sliding on one string a time for a bass with standard 19mm string spacing.

I've had a change of mind and now mainly uses my fingers. A combination of several different finger picking techniques, regular traditional two finger plucking, classical acoustic guitar finger picking, flamenco style index and/or middle finger flicking, double thumb, and sometimes also thumb+index finger pressed together, using the tip/nail of the index finger, faux pick style (though usually in those cases I will prefer using the flamenco finger flicking technique or double thumb instead), depending. Though definitely does sound less aggressive, but also somewhat more organic, than using a pick, not least because I prefer using a fairly light touch. I don't really pull the strings when I pluck them, and sort of stroke them rather than striking them. When I do use a pick though it is still the regular Dunlop USA Nylon .73mm one.

Octave fuzz! Behringer SF300 Super Fuzz, or Orange Fur Coat. Perhaps reverb for atmospheric parts, and maybe a phaser too. Some sort of delay as well, which might make the reverb redundant.

Damn, that's crazy... Just couldn't imagine a neck ever warping like that... That some impressive warp going on there. How would that warp just be exclusive to at the first fret though, and how would cutting a new nut be able fix it? Your description of this issue in the OP isn't really as clear as you apparently think it is (I realize that it obviously is to you because you know what the actual issue is already having the bass in question physically with you).

Thanks for elaborating. Even if that wouldn't really form a shape like an S at all either. I guess raised on E string, lowered on A string, then raised on D string and lowered on G string kind of would though, but even then that would be the strings/nut and not the neck forming an S.

The headline: Rot Fish-Stench's Trumpet-Friend Caught In A Car-Boot Incident And as haiku: Rotten fish trumpet Trumpet odour in a car No fun fishy joke

There once was a fellow His trumpet was yellow And in it's midts his friends hid a fish That rotted real good What a stench of a toot (Edit: Just realized it doesn't follow the traditional rhyme scheme of a limerick, but whatever) There once was a fellow His trumpet was yellow And in it's midts His friends hid a rotten fish What a stench of a blow There, fixed!...