warwickhunt

...and why wouldn't you?

The one in the PMT sale?

A bit confused by his confusion of the use of the 'stand-by'!

Yes, speaker outs are as far as I am aware always parallel (can't think if a series coupling) but when you have single outs of one type Speakon or 1/4" they don't always follow that rule and it is a case of one or the other. I'm trying to recall which amp I had a couple of years ago that had this and plugging into one output disabled the other; you could use the Speakon or the 1/4" but not both. It makes no difference as you daisy chain from the cab... assuming cab has in/out. There could well be amps with one of each that work in parallel but you'd need to try it to be sure (you'd not do harm as it would be parallel or not work). I think the caveat is that anyone plugging in cabs needs to be aware of is cab ohmage ratings and being sure to use appropriate speaker cables wired correctly. Not unheard of for noobies to use wimpy guitar leads or homemade leads wired in reverse.

Not 'that' uncommon. If it did have one Speakon + one 1/4" it's unlikely they are parallel.

Where in the UK are you?

£389 gets you a B stock Peavey valve amp! https://www.pmtonline.co.uk/b-stock-peavey-tour-vb-2-bass-amp

Yes! Genuinely made in the NE by Martin Stoneham.

Bought a set of Bart pups of Jamie; as described and prompt delivery.

I'm not knocking the sentiment of the original idea but it certainly moves these basses away from being expensive instruments to cheap works of DH art!

The one in the Bonham's auction has a surface mount output, cheap pup (not LanePoor) and 2 controls rather than 3... it looks like a mass produced jobbie to me.

...and that was at a couple of hundred pounds!

Is it 'made in the same factory' as Peavey basses?

Certainly looks like a humble Peavey to me but it is endorsed by Flea & Damien Hirst... https://www.the-saleroom.com/en-gb/auction-catalogues/bonhams/catalogue-id-bonham10133/lot-cfc2a627-1d2a-4e97-913f-ac3e013f23e8

Is that Sterling or Ray? I'd throw down the challenge/offer that I'd buy any Sterling (USA proper jobbie) at more than market value if it weighed 8lb (or as near as)... with the caveat that if it didn't weigh the stated amount the seller refunded £100 for every ounce over 8lb! 😂 That should sort the walkers from the talkers.

I've also owned 4 Sterlings (and weighed 2 more belonging to friends) and NONE have been under 9lb 8oz and they have ranged from 2 basses from 1st year of manufacture through to a 2014. The mystical 8lb Sterling is out there with the Unicorns rooting about for Hen's teeth. If anyone has an 8lb Sterling I'd love to see it on a set of accurate digital scales.

ABM600 - 12.5kg Handbox WB100 - 16kg Hmmmm I'm thinking for 3 bags of sugar I'll take the FULL valve handbox!

Fender anyone?

Warwick use a melted form of the wax when applying it to new timber. I'm sure there's a video of the factory applying wax and it is simply warmed up wax applied to bare timber.

Dano Longhorn - they are short scale but super slim and a (surprisingly) solid tone... though I do beef mine further with a Tech 21 pre/DI pedal.

Looking like a P bass is the 'last' thing you need for that P bass sound!