Boodang

On this score I do in fact omit the pots on my MM and P, but rather than adjust at the amp, all tone sculpting is done on the pedal board and happens instantly at the stomp of my clodhoppers.

Reducing the noise floor but keeping power consumption low is always a juggling act when designing onboard preamps. Having said that, the East preamps are great and the J retro really suits the jazz. I like the passive interaction of single coils in parallel, something you don't get if you buffer the pickups before mixing. Interestingly the East preamp let's you choose between passive or buffered mixing which is a nice touch. So, my jazz has the double stacked passive volume/tone but my MM and P basses go straight to the output jack, no pots.

You have to bear in mind that a passive eq can only cut frequencies, a 'treble roll off' tone control being the simplest example. If you want to boost then you need an active preamp, which means powered and typically the use of opamps. The only question really (and obviously!) is do you want the preamp in an external pedal or in the bass. Onboard, it's specific to that bass and always there, pedal can be used by any bass but it's an extra thing to take with you.

Aguilar TLC. Got this recently and it's an 'always on' pedal on my board. Battery or psu powered.

Effectively the only difference between an onboard preamp and external pedal is that the onboard is going to have space and power restrictions. Of course, if you find an onboard that really suits the bass then you have a tailored preamp on hand and it does seem like a lot of preamps these days, like the East, are tailored to suit specific bass types. My preference these days is passive, going out to my pedal board where the rest of the tone shaping takes place. But I do have a shelf full of old onboards that I've tried just waiting to be put back in once i change my mind... again!

Well, I did see a refurbished Dragon on ebay for 5K, which I didn't think was too bad all things considered. A more reasonable bet might be the BX-125 model which goes for normal money.

If you can, use one of these.

If you don't have a cassette player, you could always pull the tape out into a bowl, add some pasta sauce and eat them.... that way you could internalise them.

https://www.bluearan.co.uk/index.php?&category=Speaker_Building&masthead=Speaker_Plans&subheadnew=Bass_Reflex_Sub A lot of speaker manufacturers have cabinet designs to go with them. If you just use random dimensions it won't match the performance specs of the speakers. Don't try and work it out from scratch, use a tried and tested design. Just as a generality, I've found ported designs to be louder than sealed.

Pictures?!

I could be judging a book by it's cover but the Atomic seems like it's trying too hard to be a darkglass clone. I'd give it a miss just for the marketing b*ll*cks 'digital vacuum tube'!

I've discovered so much more new music as a result of streaming, so top bananas for that, but anything special gets bought on vinyl, if it's available. I've never been sentimental about CDs and have none left, but vinyl I've kept.

The 'philosophical' reason I like vinyl (which only applies to pre digital recording); sound pressure waves are converted to an electrical signal by a microphone which is represented by lumps and bumps on a vinyl groove,, a cartridge then converts them back to an electrical signal which is amplified and moves a speaker diaphragm to produce sound pressure waves.... the process to listen to the music being a reversal (well, in principle anyway!) of the recording and all analogue. With digital your are listening to a chip generating waveforms from a data stream. So when I play my Miles Davis vinyl I close my eyes and there's, philosophically, less of a disconnect between me and artist!! Admittedly it's a zen thing and in no way is related to the quality of the reproduced signal!

For control knobs it's the dual stacked volume/tone which I prefer to vol/vol/tone, with a series/parallel switch for added versatility. And rotosounds obviously. As for pickguard, I'm afraid I like tortoiseshell.

Piccolo basses maybe?

My latest vinyl purchase. The Hobbit in 4 LPs (apparently an unabridged version would have run to 18 LPs). Who remembers Nicol Williamson? Great actor.

Ah, pre-caffeination! Funny you should mention that as project B has taken on a life of its own already and we've settled on a 2 over 2 headstock with mahogany/ maple laminated neck and extended rosewood board that also doubles as a finger ramp. Very off piste to where this all started!

Spotify and the like is great for discovering new stuff and play lists, but nothing quite like vinyl to make you listen to an album the way the artist wanted you to hear it, in order with an A & B side.

As I said, I agree with you about the alder wood and I think this body is going to be project B. But out of interest, I can understand this particular body not being someone's cup of tea but nice woods, ergonic shape.... horrible?!

Yep, the epoxy is important and the neck is being made with that in mind. As for playing like Jaco... well that's never going to happen for me. If the resulting bass every produces that Jaco sound it'll be because someone else is playing it! And for those wondering why the hell I want a Jaco style bass when I don't want to/can't play like Jaco, it's purely because I like jazz basses and inspired by the philosophy/marketing b*llocks of SD I feel like putting together a bass to match the pickups. What's more interesting is why I feel 'connected', if that's the right word to these pickups given that Jaco is not a great influence on my playing. But there's something about Jacos life and approach to music that resonates and despite anything else has always drawn me to him. Not sure what it is, maybe it's just the immense talent and uniqueness coupled with his tragic story. And watching the 'lost tapes' documentary recently is responsible for me getting these pickups and kicking off the project.

I'm sure there's a fair amount of cynical marketing tactics by SD with these pickups but on this occasion they've reeled me in hook line and sinker and I'm prepared to suspend my cynicism and be in complete fantasy land.... I will believe in the power of Jaco pickups!

I totally agree! To a certain extent the project is going a bit off piste with this body but I like it so much I have to have it. Having said that talking over neck options for this body and i can see it going in a different direction, so I think there might be two basses coming out of all this!

The DiMarzio J's are good but I like single coils. And with the use of a serial/parallel switch on a jazz I can go from single coil to humbucker, so to a certain degree, best of both worlds.

So, getting ahead of myself here but asked my local luthier about making a '61 spec neck and here's a body he can attach it to. So, '61 neck, Walnut/mahogany body, Weather Report pickups.

I grew up with vinyl so for me it's a nostalgic thing, so I'm a bit biased. To be honest I don't care which medium (cd, tape, vinyl! Blah blah) is the ultimate, so long as it's good enough. Hell, mostly I play spotify download through a getto blaster with no stereo separation, so that's my benchmark. But I like the physicality of vinyl, the fact that I'm not going to randomly skip tracks and listen to at least half an album before switching off. It's literally a more physical medium. And there's more room on an album cover art!