Sibob

Double-edged sword though, yeah would upset tracking, but then having the OC2 first means that the fuzz is going to compress all the sub out from it, assuming that they’re used together. So really just depends on ones usage. Si

I really didn’t get on with the Filter pre when I tried it, so when I ordered my ACG, I had it built with the more standard treb/mid/bass JE preamp (I forget the name). The bass sounded awesome, and I found that preamp very intuitive (as that setup has been my experience of active basses for however long). So yeah, if you like the bass, perhaps swap out the preamp for the more conventional one. Si

Nailed it, thanks very much! Si

Hi all, I’ve googled and looked at manual a bit, but no luck. With a Mosky external foot switch (so additional fs 4 & 5), how do I assign those to blocks in stomp mode. They’re assigned in global settings, but with the 3 main switches, you assign them to a block by simply touching them, the external foot switches don’t have that tech, so how do they get assigned to a block? Cheers Si

For those who care, I’m glad to say the issue wasn’t any part of my build, nor was it a dodgy switch, it was the DOD connector (the white clip connecting the cables). Unclipped it, dislodged some grime, little clean, now all works a treat! Lovely 😊 Si

Presumably the band sent reference recordings (ie recordings/albums you like the sound of) to the mastering engineer before they started? If so then, if the engineer isn’t hitting those preferences, wrong engineer for you? Mastering by committee is not likely to get you finished very soon....or at all haha. Si

Possibly, but it’s still a fairly simple bag, the initial query of this thread was to find a solid gigging bag similar to a Mono/Gruv gear style mag. The entry level Gruv Gear hit that just about, but my next stop would definitely be a Serek bag. Si

MonoNeon's playing is always great, for all his eccentricities, his band playing is often quite beautifully nuanced. His note choices in this Jackson cover are wonderful, as well as his really well controlled use of the Whammy for that synth bass sound. Si

No you won’t damage anything, it just won’t be the best tonally is all. Personally I dislike recording with an amp in the room, much prefer headphones to track with, then mix on monitors (if available). Si // Focusrite

It’s not the ONLY way (as above), but it’s the way that will allow you the best quality IMO Si // Focusrite

Hive-mind, I’m dealing with some niggles. On first test, the pedal worked fine, but I quickly put it away as I’d been at it for a couple of hours. Next day, worked first time, nice DOD 250 overdrive tones blendable with clean, then switching it on and off a few times, the DOD circuit would increasingly stop working. Now that’s not to say that the pedal lost signal, but more that, even with the blend fully over to the DOD, the DOD’s controls aren’t responding. There is a clear difference blending between ‘clean’ and DOD.....but both are now clean, with the DOD’s Level & Gain controls having no effect on the signal. Thoughts? Edit: I think it’s the switch itself, either there’s some muck in there or it’s a bit duff. I’ll try some switch cleaner, if not, I’ll have to try swapping it out.....which will be annoying haha. Si

Audio interfaces aren’t really meant to output to instrument amps, on account of the outputs being line-level, which means you’ll be driving your amp quite hard, and at the wrong impedance....it won’t sound great. If you want to monitor yourself via the Scarlett while recording, I would suggest headphones from the interface, or invest in some proper studio monitors (ADAM Audio, KRK, Yamaha etc). Edit: If you REALLY want to your Ashdown to monitor, I would suggest buying a Re-amp box to put between the Scarletts outputs and your amp. Just remember you’ll also be putting through the track you’re recording to as well, so less than ideal....I refer back to my recommendation of using headphone or proper monitors. Si // Focusrite

What amp are you referring to? The outputs on the rear of the Solo are mono line-level outputs, so you’ll want to use both of them for a stereo signal. Si // Focusrite

Exactly, I bet Bootsy doesn’t even play it ‘correct’ live. Good on them both! Si

Well just hurry up and upload your version of it and you won’t have to go commenting on other peoples interpretations will you 😊 Si

Finished the little project I was building for a friend. Original DOD 250 circuit with added Pre-gain boost, blend and output level control. Not my finest work internally, it’s relatively tidy, but there’s a lot going on in there. Enclosure was created by my friend, I just built everything into it. Si

This Will Destroy You Si

Without wanting to hijack, what Win10 version are you on? To my knowledge, 1st Gen Scarletts are tested as compatible on version 2004. Si // Focusrite