FuNkShUi

Thanks for the suggestions so far everyone. That crossover looks like it could be useful

That's fine. We already have one we can use. I just wasn't sure if i could do without it altogether. Next thing then.... What is the best way to connect the subs to the mixer, to make the most out of them?

I don't know if its a slave output as such. But yes, both are passive. L and R from mixer goes to the power amp. L and R from the power amp go to the tops "input". Each top also has an "output", and we feed from that, down to the subs

That's an option. How about if i ran the L and R to the tops as normal, and then linked the tops to the subs as we have, but let the tops power the subs. Is that an option? I haven't checked impedance's, and don't know how much that would effect the overall sound etc. As i said, i'm no expert!

Think this would be the right forum for this? Feel free to move. Currently we have a non powered desk (Yamaha MG16xu), powered by a Behringer iNuke, then this powers passive tops, that we link to subs underneath. The subs have a built in crossover in them. I've convinced the band to go for active tops, and as such we are looking at either RCF 322s (second hand) or some DB opera 12s, or some Alto TS 212s. My question is, what would be the best way to set this new system up? Because the tops will be powered, we obviously wont be running the power amp to them. So what would you do? Whats the best way to link everything? I'm not a expert on PA's so any advice is appreciated, even if you think it may be obvious. The mixer has 4 auxs' and 2 monitor outs. At the minute we run our monitors from the aux outs, so they can have individual mixes to them. So my thoughts were to run the tops as normal, then instead of linking the subs to them, run the subs from a aux via the power amp , and manually mix in the channels we want to come through them. Or would you still link the subs to the tops in series , and do away with the power amp?

I have experienced pain in my left hand through playing chords etc. Yes it does get better. If you're specifically talking about barre chords, make sure your thumb is anchored on the back of the neck, quite low, and so that it can pivot. Rather than clamped on like a capo. Don't know how helpful that explanation is?

Bass > Little Mark 2 > 2 X TKS S112s

Bit of a thread revival, sorry about that We are looking to buy some of the RCF ART 712-A. If we get them, could we potentially put kick and a little bit of bass through them? Or would we need subs too? We have subs, i'm just trying to work out what we need going forward. Thanks

Awesome. Congrats

Maple and Ebony for me too

[quote name='SpondonBassed' timestamp='1501755016' post='3347105'] Never-the-less, I don't think cottage craftsmen like yourself are a threat to any time-served luthiers. [/quote] I'm sure you didn't mean this in any bad way, and i have no doubt Andy wont correct you, but trust me when i tell you Andy is no average hobbyist. Yes he makes the basses from his house, but it has no effect on the end quality of instrument produced. His bass surpassed most of the instruments I've ever played (including customs), and was only equal to a couple (A couple of Sei). Like i said, i'm sure you didn't mean this to be taken in a derogatory way, but i just wanted to point this out Cool build concept again Andy. Look forward to seeing the results

[quote name='TheGreek' timestamp='1501671030' post='3346390'] Sold Kert a TE AH250 in a totally problem free transaction. Hope that you can get your AJR build back one day... Trade with confidence [/quote] Me too Cheers Mick

Have just completed a deal with Mick on a Trace Elliot. Super easy, no problems at all. Top bloke. Cheers Mick

I think he uses that rig so he can play any gig he wants in Sweden without having to leave his house. Just point the speakers in the right direction, and job done

Look forward to seeing the finished article already

Fantastic end result. Congratulations Mick, and Andy!

[quote name='kumimajava' timestamp='1500584212' post='3338959'] Sort of reminds me of those melting clocks in some surrealist paintings... so how about "Dali's Daydream" ? [/quote] That's just taken the lead for me

We only really play weddings or functions now. All the band members have partners. But the rule is, if you need an invite to be there in the first place, the partners can't come. We usually play maybe 3 pub gigs a year, just for prospective clients to be able to come and watch. They can come along to them if they want

[quote name='BassApprentice' timestamp='1500538161' post='3338488'] but I came across this word: [b]Psilos[/b] which means bare/smooth/uncovered in ancient Greek. Thought it would be quite fitting for the nature of the design and finish. [/quote] You've got your winner surely? I'm not even going to try after that!