3below

Dremel (or equivalent) with a small (very small) diameter cutting wheel. Also needed, plenty of masking tape to prevent skid mark damage to the case, and a steady hand! YMMV attempt at own risk

The very tool

Sometimes you can grip the damaged heads with good flat nose pliers and get them moving. Once eased slack continue with pliers or fingers or superglue a bit of something on them to make rotation easy. Another solution is Easy out and/or Screw extractor tools. You may need to slightly drill out the stuffed Allen screws. If this fails (or you want the low cost method) drill the heads out so that they fall off. Remove the case lid. Remove the remaining screws with pliers or small mole grips.

First thing I did (and probably most others did in the 70s) was remove the ashtray(s). There must be a mountain of them lurking in cupboards, still have mine, somewhere. Agree on the neck shaving, clearly a man of skill (fearlessness?) to attempt that. My initial thoughts were gently flatten the gouge and then graft on new maple repair followed by blend in to original profile. Then again I would not attempt such a repair on a 'valuable' bit of kit.

As per Matt P, when faced with a similar problem fitting Hipshots to my SG bass I found strips of plastic milk bottle ideal,. You just need to find the right thickness plastic YMMV

As per Matt, when faced with a similar problem fitting Hipshots to my SG bass I found strips of plastic milk bottle ideal,. You just need to find the right thickness plastic

Depends on what result you are hoping to gain

Bought a looper pedal from James. Excellent communication, tracked delivery and rapid arrival. Many thanks.

Exactly

What are you building from the cast iron / aluminium frame? Great shape bass, I built my first bass in 1974 - short scale telecaster made from elm coffin boards. Local coffin maker would give them away, try finding elm at giveaway prices these days.

I put a small amount of wax on the threads on mine and every so often check they have not seized (my polepieces that is). As you note changing the volume has a significant effect on the tone (same on my L1505 as well). What height have you got the MFD from the strings?

Posted twice

Great looking bass, who stole one of your E string polepieces?

Just like mine and TI flats are the business on it.

Totally agree, I have a few basses (nothing seriously special but fairly difficult to replace or find again) that have increased in value. At my time in life I should move them on, I can't play them all, I don't need a 'recording fleet'. I have my go to bass (£375 Gibson) but I enjoy the rest now and then which is the problem. Collect for gain at your peril, if you get attached to them all is/may be lost on the investment front

Mic it up and feed into pa or a power amp and humongous bass cab

I fondly remember using the Wayne Kerr Bridge in my University time, happy days

Have used my Fender Super 60 1x12 valve guitar combo for recording bass. Obviously no earth shaking volume but a really good warm tone.