danweb22

Selling my Fliptop as preferred the sound of my Quilter Interbass as an all in one practice solution Modelled on the B15 and now discontinued so getting hard to find Price includes U.K. postage The Fliptop is a JFET preamplifier that is modeled after the B15 amplifier. The gain staging and EQ sections were carefully designed to give the feel and response of the vintage tube amp, offering a good range of pillowy tone that can be driven to the point of light overdrive if pushed. In addition to the James stack EQ and gain staging, the Fliptop adds a Master volume control on the output so you can dial in the amount of drive you want while adjusting the volume as needed. The Cab knob is essentially a wet/dry control, allowing you to apply 0 to 100% of the cab tone to the preamplifier output. Dialing in more of the cab response tightens the low end and cuts the high frequencies for a warm, vintage tone. The frequency response is modelled after the 15" cab. The pedal requires a 9V DC power supply (not included). The DC supply should be a standard Boss style connector, center negative polarity. The current draw is approximately 12 mA. The power supply may be increased up to 24V DC with the result of more clean headroom and a slight increase in boost. The Fliptop has a true bypass switch. Dimensions: 4.77" long x 2.6" wide"

Like brand new in box, not needed anymore USB cable and manual included Latest firmware installed which includes the noise gate and tuner Price includes U.K. postage Royal Mail Special Delivery

Selling this as no longer needed, used twice at home JFET Preamp pedal based on the Ampeg SVT Purchased directly from Broughton Excellent condition, no Velcro, original box Price includes U.K. postage

Price drop to £900 Selling this unfortunately as need to raise some funds for home improvements Such a great bass and been set up really nicely. Has a really nice flame in the maple on the neck too which I haven’t seen on others Excellent ”road worn” condition 😀 Strung with D’Addario Chrome Flats Comes with Fender gig bag and original box/packaging Price includes U.K. mainland shipping

Selling this as no longer needed I plugged my BassRig Super Vintage in to it so I had a nice practice setup with headphones and aux in, runs on 9v battery or dc power Excellent condition with box and manual Price includes U.K. postage

Selling this as no longer needed In excellent condition with original box and manual Price includes RM special delivery in the U.K.

Selling as no longer needed Like new condition with box and paperwork Price includes U.K. postage

Moving this along as my JMJ gets all my attention now 😂 This is the rarer nitro finished version of the Classic 50s. The neck has that lovely worn in feel and the body is starting to dull in places with a few marks here and there I have the original gold anodised pickguard too and also the original G&G tweed hard case with has a few marks but nothing major Currently strung with Fender flatwounds Price includes U.K. mainland postage Specs; Body Material: Alder Body Finish: Gloss Nitrocellulose Lacquer Body Shape: Precision Bass Neck Neck Material: Maple Neck Finish: Gloss Nitrocellulose Lacquer Neck Shape: "C" Shape Scale Length: 34" (864 mm) Fingerboard Material: Maple Fingerboard Radius: 7.25" (184.1 mm) Number of Frets: 20 Fret Size: Vintage-Style Nut Material: Synthetic Bone Nut Width: 1.75" (44.45 mm) Position Inlays: Black Dot Truss Rod Nut: Original Vintage-Style Electronics Middle Pickup: Vintage Split Single-Coil Precision Bass Pickup Configuration: Split Single-Coil Controls: Master Volume, Master Tone Hardware Finish: Nickel/Chrome Bridge: 4-Saddle American Vintage Bass Tuning Machines: Vintage Style Reverse Pickguard: Gold Anodized Aluminum Control Knobs: Knurled Chrome Strap Buttons: Vintage-Style Neck Plate: 4-Bolt Vintage Style

Selling as no longer needed Excellent condition I don’t have the original box but it will be suitably packaged Angled baffle One 10”, 8 Ohm high efficiency neodymium full-range driver 300W (rms) power handling Durable painted cab Dual paralleled Speakon/phono combo input jacks Recessed top rear handle Built-in cradle for ELF bass amp Heavy duty metal grille Dimensions: 12.0”W x 12.5”H x 14.0”D Weight: 16.2 lbs

Now £45 posted Selling as no longer needed Good condition with some minor surface marks and some adhesive residue on the underside 3 small holes were drilled for mounting the previous power supply CS6 Case is excellent condition Price includes U.K. postage Pedal Board Torsion-resistant, lightweight aluminium construction Slot design for easy pedal mounting Made of cold-rolled aluminium Completely flat, angled board surface - no welding seams Robust black powder-coated surface Right side mounting holes for RockBoard LED Light (Article number 461657 - not included) Dimensions (L x W): 470 x 142 mm Weight: 720 g Flight case dimensions: Internal dimensions (W x D x H): 480 x 166 x 118 mm External dimensions (W x D x H): 507 x 193 x 145 mm

Selling this as no longer needed for a project that never materialised Its literally a month old, plugged in a few times at home and that’s it! Excellent as new condition with original box and unopened manual, U.K. and European power cables Price includes U.K. shipping XLR Direct Output Mic / Line Switch Pre / Post EQ Switch Ground Lift Switch Aux Input Head Phones Dual Speakon® Speaker Outputs Impedance Selector Switch for 8, 4 or 2.67 ohm operation SPECIFICATIONS: Power Output: 175W/8 Ohms, 350W/4 Ohms and 350W/2.67 Ohms Minimum Speaker Load: 2.67 Ohms Dimensions: 2.63”H X 9”W X 9.83”D (67mm H x 228.6mm W x 249.8mm D) Weight: 3.5 LBS ( 1.75 Kg)

Selling this as no longer needed as I’ve purchased a Origin Effects Super Vintage Excellent as new condition, no marks whatsoever. Comes with original box and manual Price includes U.K. postage Detailed info here https://www.nuxefx.com/melvin-lee-davis.html

Selling this as no longer needed Excellent full working condition with power cable I don’t have the original box but have suitable packaging to post These seem to be around £399 new now! Price includes U.K. postage

8lbs 9oz or 3.89kgs