oldslapper

It’s a foldable stand that can accommodate 7 electric guitars. Hence the title 😂 £15 collected. I could probably take it apart, get some material and post it for £10. I’m occasionally in Bristol and Bridgwater if you can’t get to Bath.

I’d have it if it wasn’t for the fact that I’m trying to sell my combo too. I think we’ll both end up keeping them. 😂

That’s an awful lot of amp for the money. It’s seems very difficult to shift amps at the moment, unless you practically give them away.

Up for trade for smaller combo like a MB 112 or 28.

Terrific necks. Love my unlined P neck.

Up for sale again. UK made Combo with Neo drivers. Loads of the power, less of the weight. Has heavy duty castors and TE cover. Sounds great, and in good nick. Can chuck in the P bitsa in picture for £400 all in. Specs: Using the iconic Ashdown ABM preamp, coupled with a very special, 400 Watt, lightweight power section, bass players can enjoy pure Ashdown ABM tone in a compact and lightweight package. Handmade in the UK, Ashdown introduces the ABM-NEO-210 Combo and NEO-115 combo, both fitted with Ashdown high-frequency horns and custom Italian Sica Neodymium drivers, making the iconic line now a little bit easier to transport between shows. All combos are sized to be matched with an extension cab from the range making it easy to expand your rig. Specification Power Output400 Watt Speaker Configuration2 x 10 Speaker OutputsSpeakon/Jack Frequency Response-3dB at 17Hz and 30kHz High Instrument InputImpedance 3.9M Ohms Low Instrument InputImpedance 10k Ohms Line Input Impedance 22k Ohms Line OutputImpedance 10k Ohms DI Output600 Ohms balanced Tuner Output Impedance 1k Ohms Impedance Minimum 4 Ohms Effects sendImpedance 22k Ohms Effects returnImpedance 22k Ohms Effects Return Effects Return Impedance 22k Ohms Level 0dBu Pre-amp Tubes1 x 12AX7 H x W x D (mm) 630 x 465 x 330 Weight (kg)26.6 Collect or meet up in and around Bath/Bristol/Bridgwater. Further by negotiation possible.

Bump. Still available. Shipping might be an option if I can source a hard case that fits, which will be added to cost.

Nope, it’s my brother 😎

Had a few PMs, and there’s a bit of a queue building up whilst people look for money behind the sofa, sell kidneys/kids/kids kidneys, and generally have a think. But a question that comes up is about weight. I’ve just weighed it on my bathroom scales and it showed 6.4 lbs on several attempts. Hope that helps?

Replied. Thanks. 👍🏻

Bass demo.m4a Demo from Section of recording Never saw this day coming, but I was taking it to be defretted when I was offered my old EUB which I couldn’t resist and I need the funds. This has been used for one recording gig in November since I bought on this ere forum back in September-ish I believe? Otherwise been sat in it’s gig bag. Strung with black nylons which I think suit it nicely. The bridge piezo was removed (as is quite common with these) and replaced with a lovely Krivo mag. No feedback but still retains the woodyness when dialled in with the internal tone control. I will dig out the Spotify/iTunes link to the recording, or get a demo up. You can feel the quality of the build when played, and the nylons give it a nice upright sound. The ebony board is gert lush my babber. Looks cool as flip too! Needs to be played, not sat in a case. I am not posting this without a hard case I’m afraid. But will travel by negotiation within reasonable distance of Bath/Bristol/Bridgwater areas. I’m open to offers btw, but no trades. Specs: Factory Specification: Finish Aged Gloss Top Solid Spruce; Longitudinal Bracing Body Material Laminated Flame Maple Body Dimensions Lower Bout: 17" Upper Bout: 12.6" Waist: 10.25" Body Length: 21 Neck Material 5-pc Laminated; Hard Maple/Mahogany Neck Shape Rounded "C" shape Neck Joint Dovetail; Glued-In Scale Length 30.5" Headstock Historic Epiphone Dovewing with Pearloid "Banner" logos Headstock Inlay "Epiphone" logo in pearloid Truss Rod Dual-Action Truss Rod Cover Black PVC "Bullet"; 1-layer Fingerboard Material Ebony Frets 20 Medium Fingerboard Inlay Pearloid "Notched Diamond" Binding Body Top: 3 layer Body Back: 3 layer Fingerboard: 1-layer Nut Bone Nut Width 1.65" (42mm) Pickguard Imitation Tortoise (Installed) Hardware Aged Nickel Machine Heads Epiphone Historic Reissue Tuners with Marboloid "Crown" buttons; Improved to 18:1 ratio from vintage models Preamp eSonic™ HD (High Definition) Pickup Shadow NanoFlex™ HD; Under-saddle Power 9 Volt Battery Controls Master Volume Master EQ Pickup Selector 3-way Toggle Switch, Epiphone All-Metal; Toggle Cap, White Knobs Black Tophats with metal inserts Bridge Floating Adjustable; Ebonoid Tailpiece Epiphone Inspired By Bass Trapeze Output Jack 1/4" Saddle Compensated; Artificial Bone Strings D'Addario ETB92M Tape Wound Acoustic Bass Strings Serial Number 1930's Era Replica Soundhole Label

Want this gone to make room for incoming! for a hand made guitar that plays nicely, but needs a bit of love. Beautiful nylon electro acoustic. Handmade in Bulgaria, LR Baggs electrics. On closer inspection this has had a more substantial repair than I’d realised and have attached another picture of the inside under the bridge. Looks like it was to reverse some “top lifting”? Still has nice action, but obviously with the top “anchored” it has less movement/vibration acoustically. However, through the piezo this has less of an effect, only that the contact is less even across all strings, most noticeably the A string has a lower volume. As a result, I have reduced the price to reflect this and in interest of full disclosure. Has small scratch on back (see pics). Here are the specs from Kremona site https://www.kremonausa.com/en/signature-series/lulo-daimen-kremona/ Comes with new tourtech hard case and new unopened spare set of strings. Only selling as need to raise funds. Would prefer collection meet up, within Bath/Bristol areas or by negotiation. Otherwise could post as it has a hard case.

Bargain!!

That black one is “shuper shexshee mish moneypenny “ Did a couple of residencies at butlins with one of these in the late 80’s. Chose it over my USA fender at the time. Terrific basses, light, and can fit in a Golf GTI boot. GLWTS Nick.