-
Posts
5,151 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by franzbassist
-
SOLD: Providence Anadime Bass Chorus Pedal
franzbassist replied to franzbassist's topic in Effects For Sale
-
Recently bought this used to use with my fretless, but the reality is that I just don't use it Really easy to use with some lovely warm tones. A few marks but nothing serious. Velcro on bottom. Standard 9V DC centre negative power supply in a Boss(ish) sized case. Here's Rene doing his thing with one (some of the settings are a bit wacky IMHO). [media]http://www.youtube.com/watch?v=7UY2RRDdMCE[/media] [color=#282828][font=helvetica, arial, sans-serif]These are £179 new. I am firm on £100 posted.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Thanks for looking.[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]Gareth [/font][/color]
-
Bought new by me in June of this year, but used just once as I have decided to stick with a Bassbone for my switching needs. [b]Cioks Adam Link[/b] Adam link is a small and very flat power supply for effect pedals with 4 isolated outlets and is deisgned to fit under the Metro. It offers voltages or 9 or 12V and a total output current of 700mA. The top two outputs are fixed at 9V, but the bottom two are configurable to either 9 or 12V.[list] [*]Outlet 1-2: 9 or 12V DC / 100mA each [*]Outlet 3-4: 9V DC / 250mA each [*]short circuit protection of all outlets [*]advanced LED monitoring of each outlet [*]120 or 230V mains voltage operation [*]detachable mains power cord [*]6 Flex cables included, one of which is a Split Flex so you can power two pedals from it [/list] Condition is absolutely mint. New cost was £95. I'd like £80 posted in the UK using Recorded Delivery.
-
Unbalanced volume between strings issue...
franzbassist replied to cLepto-bass's topic in Repairs and Technical
You may well have tried all of these steps, but worth checking. Is the issue present when you pan so only one pickup is used? Do you need to bring the pickups closer to the E string to increase output in the lower end? Have you checked that the bridge saddle is seated correctly? Is the string pinched in the nut? Is the string sitting correctly on the zero fret? -
-
[quote name='CameronJ' timestamp='1503576908' post='3359311'] Looks like there are signature cabs too. Look closely from 50 seconds in. The 210 on the top of the cab stack has offset drivers and a yellow Marcus Miller silhouette graphic on the bottom right corner. [/quote] Good spot. Back panel of the amp looks like 800 watts, and a sticker says "hard limiter" too. it also says "Little Mark III"....
-
Looks like 5 band EQ, VLE and a "Millerizer" control, which I'm guessing is exactly the same as the VPF. LED backlit input? The usual nasty Markbass graphics...... (and this from someone with MB stuff!)
-
[color=#ACACAC][font=Arial, sans-serif][color=#000000]This TCM has been used for about one year. It consists of two stacked knobs, so is perfect for upgrading a P bass to an active circuit:[/color][/font][/color] [color=#ACACAC][font=Arial, sans-serif][color=#000000]Stack one: Volume on top ring, mid cut/boost ([/color][/font][/color]+/- 15dB @ 400Hz) [color=#000000][font=Arial, sans-serif]on lower ring, pull up for passive operation[/font][/color] [color=#ACACAC][font=Arial, sans-serif][color=#000000]Stack two: Passive treble cut on top ring, bass boost/cut ([/color][/font][/color]+/- 15dB @ 40Hz) [color=#000000][font=Arial, sans-serif]on lower ring[/font][/color] [color=#ACACAC][font=Arial, sans-serif][color=#000000]The preamp is 9V battery powered, but you can add an additional battery to give 18 and ensure more headroom and longer battery life. The preamp c[/color][color=#000000]an be combined with both active and passive pickups.[/color][/font][/color] [color=#ACACAC][font=Arial, sans-serif][color=#000000]The stacked pots have 4 mm (upper) and 6 mm (lower) solid shafts. Black stacked pots are included.[/color][/font][/color] Input Impedance >1 MOhm Output Impedance <10 KOhm Input Sensitivity max. 450mV @ 9V Output Voltage max. 4,5V @ 9V S-N-Ratio 96dB (1KHz/5Vss) Power Consumption typ. 0,6mA @ 9V / 800h Batt. Life Dimensions 25 x 25 x 15 mm This is what it looks like: And the knobs look like this: I will include installation instructions from Noll. These are around 140 euros new. I'm asking £[s]80[/s] 75 shipped in the UK. Thanks for looking
-
Superb bag, but I've decided to go with a different Mono bag for my gigging needs. All the Mono spec is [url="https://monocreators.com/products/the-flyby"]here[/url], but it's essentially a large backpack with a detachable laptop section. Loads of pockets, mine is the black version, and everyone knows Mono quality is top notch. Sorry for the stock photos... This one is in excellent condition, no rips or tears or stains or anything like that. A solid 9 out of 10 in my opinion. £200 ish new, I'm firm on £120 posted in the UK.
-
I sold a gig bag to Chay. It was an effortless transaction and he was a pleasure to deal with.
-
[quote name='Brook_fan' timestamp='1502959682' post='3354609'] Sorry to resurrect this post again. Does anyone know where this bass is now? Robbie [/quote] Last I saw it was at an online shop called "Shady Grove", but that site closed last year I think.
-
[quote name='Yardicus' timestamp='1502977150' post='3354816'] Thanks for the info TPJ do you know how much they cost and is he still building? I was looking for this on Facebook and there isn't much activity on his page. [/quote] Mine was only made a couple of months ago and was £90.
-
Looks good. Mint green would be bangin' on that finish too
-
Sold! Demeter VTBP-M-800D w/Jensen DI
franzbassist replied to Brusen's topic in Amps and Cabs For Sale
-
[quote name='TPJ' timestamp='1502899943' post='3354290'] Does that one on the right still run off a battery or from a power supply? [/quote] Mine is power supply, but you can choose either/both for all versions
-
The FDeck clone by 4114 is excellent. I added one to my DB setup recently and it was a revelation: tightened the sound up and no more boom or feedback I have the same model as the one on the right in this pic.
-
GONE: 2 shipping boxes for bass - collected from Portsmouth
franzbassist replied to franzbassist's topic in Completed Items
Collection confirmed for next week. -
In shopping for a decent quality gig bag to house a new bass, I came across this new to me model from Protection Racket - the Gig Case. And then a friend offered me a Mono Vertigo, which is my favourite bag of all time, so of course I had to buy it. This is brand new, never out of the house, and surplus to requirements It's light, slimline, and well padded with high density 10mm foam on the front and back, but lacks the internal frame its more expensive cousins have. The entire headstock area inside is lined with a hard wearing "Racketex" material, as is the bridge area, while the rest of the bag is lined with "Velvetex", which is a soft but durable brushed cotton. The neck is cradled in a large, movable, firm neck cushion that keeps angled headstocks off the back of the bag. Like the Mono Vertigo, it is a top loader. It has a strong and comfortable handle. Decent protection on the outside of the base, and inside the case there is a thick bolster to cushion the bottom of the bass: no chance of damaging your end strap pin if you drop it. For £50 RRP, if you want something lightweight and sleek, I think this is hard to beat. I'd like £40 posted.
-
I sold a Mono "Tick" to Drew. It was a seamless transaction and I would happily deal with him again.