Phil Starr

[quote name='FinnDave' timestamp='1410076901' post='2545791'] She'd be pleased to hear that! She is still full of energy and her voice is as good as ever. It sometimes seems unreal to be sharing a stage with her, but she gives it everything, even in rehearsal. [/quote] We're often up in Reading so I'll keep an eye open to see if you are on when we are up that way. Cheers

Oh day dreaming about Babe Ruth and I forgot. We currently do 2x45 mins with a new band building a set but my previous bands tended to do 2x1hr. 2x45 is generally too short for a pub who ideally want you to go from 9.00-12.00 which extends the drinking for as long as possible whilst not annoying the neighbours too much. A poll on Lemonrock a year or so ago came out with an average figure of just over £200 for pub gigs.

[quote name='FinnDave' timestamp='1410052903' post='2545741'] Usually asked to do 2x60 mins, tonight was supposed to be 2x45 mins but both sets ended up at round an hour each after encores. And we don't get £600 even with a fairly famous recording artist as our lead singer. [/quote] Wow Jenny Haan, loved Babe Ruth, unusual sound at the time and she had such energy on stage. Still have Wells Fargo and The Mexican on the iPod

Where are you in Devon? I'm just outside Axminster and am expecting the delivery of an MiBass this week. £209 from Andertons, You'd be welcome to come and try it out if you are local.

You do like to live life on the edge Steve! The 2ohm tap would work best though both would be OK as either way you are 33% out. The 2ohm tap on the amps output transformer is likely to be thicker wire because it is expected to carry a higher current. Cheers

If you are looking for vocal monitors or a small PA then these have to be the bargain of the century (OK its still early enough) I've just got fed up with carrying my old 15" monitors and an amp and decided to go active for the smaller gigs. I spotted these http://www.andertons.co.uk/active-pa-speakers/cid627/active-pa-speakers.asp#1409763196934page-1 Wharfedale Titan 312a's a lightweight plastic box with a 12 + horn and bi amplified 200W. Just been playing with them and the vocal sound is delightful, it's smooth enough that I can easily exceed the gain before feedback of anything else I've tried. Fairly wide dispersion and pretty good midrange clarity, much better than the Yamaha DSR's I tried recently or anything short of the RCF's the bonus? They are £139 ea. They are also pretty loud going up to a claimed 128dB, the 15's are only £169. The downside is the bass, I didn't find them too bass light with recorded music but when you turn up loud you get the expected resonances from the cheapo plastic cab. My plan was to rip the plate amp out and build my own if they didn't do the job but frankly I'm blown away at the price. If you used these as a PA without Subs I really think you might lose something at high levels though as an acoustic act they would be ideal. The price put me off and I nearly didn't go for something which is cheaper than a Behringer 1320 wedge. If these prove reliable then they are unbeatable at this price point, get them whist they are offer. Here's a review http://www.performing-musician.com/pm/dec07/articles/wharfedaletitan.htm

Well done, I've thought about contacting Blue Aran, or the importers, to at least ensure there is some stock available. With the plate amps it is actually cheaper to buy a cheap powered PA speaker and chuck the rest away or sell it on as a passive if you can fill the hole where the amp was! I didn't list all the speakers we considered, a lot were rejected without even modelling them because of value for money or because the specs were out the range we thought was acceptable. I'm afraid that there is a little pause in proceedings before I make up the final cabs. I caught my thumb in the bench saw last weekend and minced the tip. Can't even hold a pick with it yet.

[quote name='Doddy' timestamp='1409688111' post='2542312'] I don't think you need to be thinking about having the enough volume to overpower the drums.You need enough to be balanced with the band as a whole, not to overpower anyone. Also, if you do get to play big concerts you shouldnt have to reevaluate your rig, because in those situations you'll always have PA support. I've played some pretty big gigs with my Ashdown MiBass rig which is either a 550 or 240 watt head and one or two 1x12 cabs.Its got plenty of volume to be able to play smaller venues with no support, and has tone for days. I know you're against Ashdown, but I can honestly say that it blows away my old Hartke rig (HA3500, HA4000, 4x10, 2x10) in every way. Personally, I'd be more concerned about you saying that you won't be ready to gig for 6 months. [/quote] Oh dear I think I started this, my throwaway phrase about overpowering the drums was meant humourously. It is clearly absurd to do this although being able to be louder than a drummer means you have enough headroom and you have reached the point where you can stop adding more. I think the OP understands that. Having just ordered an MiBass to replace my HA3500 I'm really pleased to read that It upgraded your sound. Thanks for the advice by the way.

OK you have a very simple choice to make, it isn't a matter of right and wrong, both can be made to work and for me the critical question is do you have a sound engineer to mix FOH. Your choices are: Everything through the PA Keep the PA for vocals and acoustic instruments. The advantage of everything through the PA is twofold, you can reduce the onstage sound right down which will enable you to hear everyone in the band better including yourself. Then you'll collectively and individually play better. With a lower sound level you get to keep your hearing without having to wear ear defenders. You'll also have a much clearer sound for the audience because you won't have the back line picked up by the vocal mics. The second advantage is that of control, With most of the sound coming through the PA people in line with the guitards amps will hear what the rest of the band are doing and you can project the sound so everyone gets to hear everything. You can't have a properly mixed sound unless the engineer can adjust all the volumes at the mixer. The advantage of everything except vocals through the backline is simplicity. Don't knock simplicity, you are far more likely to get simple sound right on the nail. You set up exactly as the last gig, someone goes out front and says guitarist down a bit, bass up, or whatever and you are good to go. The other thing is that you hear the same volume or slightly louder than the audience and this makes it all feel much more trouser flappingly immediate. You will suffer some permanent hearing loss though without ear defenders. I much prefer a fully mixed sound, I've been a sound engineer for 40 years and a musician for 6, but with no-one front of house my bands both have settled on a vocal PA only for pub gigs, without someone out there mixing dynamically a fully mixed system is something that needs a lot of skill to do effectively. Why take subs at all though if you are not putting bass through the PA? If you want more you might find some of this useful and it has links to more detailed articles http://www.ultimate-guitar.com/forum/showthread.php?t=1591207 Cheers

There are pracical reasons for cabs being under sized. Portability, In my early days as an 18 year old student I built a mate an optimum sized cab only to find it wouldn't go through a doorway and we had to remove the sash windows to get it out of the room! Tone, believe it or not an extended and full bass response often creates problems and isn't an unmixed blessing. To many room resonances excited. reducing the cab size will cut the deep bass and create a bass hump a bit higher up. This is the sound of most cabs and one we find pleasing, if a cab has a good 'thump' you can bet its the hump of an undersized cab. Go into WinISD and you can change the box sizes and see how that changes the response. If you are unfamiliar with Win ISD the best way to do this is to open up a new project, input the same driver and then change the plot colour. Then change the box volume (try halving it) and both the original and half a box responses will be displayed on the same graph. You can fiddle with tunings and see what that does too. If you want a flatt response in a small box then look for drivers where Qts is small and so is Vas. Power handling is often slightly higher in an undersized cab

It says a lot for Leo Fender that these are still go to basses. Personally I love the tone of my Fender Jazz at home but so often the P bass just sits so well in the mix when with the band that it is always what I turn to if there is anything rocky going on, they really do just work. The jazz works well with softer semi acoustic stuff though. Pickups pick up more of the fundamental relative to the harmonics the further away from the bridge they are. This means there is a sweet spot where the balance between fundamental (the deep bass) and harmonics gives a nice balanced sound, with a twin pup design you can't have both on the sweet spot and usually the neck pup is too heavy and the bridge pup too light. Blending them restores harmony grasshopper, but because the pups are separate there will be cancellations of some frequencies so you get a new sound often described as a mid scoop. Personally I love the sound of my Jazz with the neck pup on full and the bridge pup just about 2/3. It is smooth when I'm gentle and snarls as I dig in, but it doesn't sound like a P bass. I'm surprised no one has mentioned the neck, traditionally the P neck is much more solid and chunky, the J bass really quite elegant and slim. With small fingers I much prefer the J-bass neck, though lots of P-basses are now fitted with a J style neck. The experience of playing them is very different IMO. I'd absolutely agree with the guy who said the one he prefers depends upon which month you are talking about. Most gigs I use my American Deluxe P-bass which has a neck halfway between J and P with a P pup and what looks like two J pups fixed together as a humbucker. No two fenders are alike anyway.

That's a fantastic budget and should give you a pretty wide choice and some great gear. Your approach is going to be the best way forward. You are going to give everything a good listen before you buy. I feel sorry for the shops a little if they are going to invest hours in you auditioning gear before you go to a German discounter. You should at least offer them the chance to price match Hartke speakers are unique and if you like the sound then you probably have to stick with them or use them as the sound to compare your other options with. Too many people here go on about dispersion with 4x10's. There are problems with a restricted dispersion of higher frequencies but this is also part of the sound, the restricted dispersion pattern is also helpful in many venues as it reduces the reverberant sound off the side walls and ceilings. Mixing cabs is ok but it has a tendency to smooth out any character in the speakers rather than adding the character of both. I'll question however the wisdom of going for a huge rig like this. I can see that you might struggle with 170W into a couple of dodgy old speakers but put that through a 4ohm 4x10 and you are going to get a lot more volume immediately. Get a really good 2x12 and a more powerful amp for example and you can completely drown out the drums. I've said it elsewhere but my drummer complained he couldn't hear his own snare when I cranked up my own rig. If you are going to have to mic the drums then your band will sound better with your money invested into the PA. Really if your rig can reproduce bass without distortion at 120dB you are going to be more than loud enough to drown the drummer and damage your own hearing permanently (That's serious, not exaggeration by the way) I really wouldn't give most guitarists a 4x12 for the same reason. You've said that you will be playing small to medium venues, why carry gear designed for playing stadiums in the days before PA support was available?

Personally I prefer a 'heavy' 3/4" cab with minimal bracing to an extensively braced cab. Not that i think one is wrong and one is right but I'm less than convinced that the extra work is justified by the change in sound. There is very little weight saving if the bracing is extensive. One day I'm going to do extensive testing of this but I haven't so far. I'd stick to broom handle style cross bracing with only one or two across the panels. Keep them off dead centre, you are damping panel vibration as well as stiffening the cab and a central brace only moves the fundamental up an octave. Kind of like trying to damp at the twelfth fret and playing an accidental harmonic.

What I'll end up gigging with is up to how it sounds, I always advise people to listen before they buy and not rely on well meaning advice and then what do I do? I'm just fed up with the weight of the Hartke 3500 and given that I rarely touch the amp during gigs the eq ,versatile though it is, won't be missed. 350W through my current speakers is total overkill and my drummer complained of not being able to hear his own snare so I guess that's loud enough. I contemplated using a PA amp and Sansamp but at just over £200 from Andertons this looked cheap enough to take a punt on, I have a bit of a soft spot for Ashdown because their after sales is so good. I'll let people know here how I get on with the amp.

Just had a successful gig last night with my Hartke Kickback 10 that someone mentioned earlier. It was a small pub with a low ceiling and I decided to use this which I carry as emergency backup. My normal rig was in the van but as I expected it would have been overkill. Depends upon your band of course but it is surprising how little you can get away with. We play Pop/Rock and the pub would have taken about 70 people. I'm toying with replacing the speaker with something a little more capable and using it more often in small venues. The only problem is that it doesn't handle extreme bass at all well and if you crank it you need to roll off the bottom end a bit. Shoving it hard against a back wall brings the bass back up a little though, you couldn't use it on an open stage.

You can overdo the worry about joints, rabbets make it easier to clamp up but don't add significantly to the strength, there isn't a big increase in glue area, there are lots of successful cabs with simple butt joints for example. My favourite for home construction is the reinforced butt joint with a 1" batten screwed and glued along all the joints. Screwing and gluing means no clamping increased strength and some damping of panel resonance and it is so easy. It was the recommended technique for years and even some commercial cabs used it when they were hand built. Almost any mastic is good for sealing joints, though if you do a good job should be unnecessary. The glue should seal everything. I use water based mastic because I don't like solvent fumes around expensive drivers but by all means use silicone if you leave the cab to air for a couple of days before fitting the driver permanently in place.

Depends upon how bad it is. My first bass (Cort) had a real problem with the D and G strings sounding really weak. New Rotosounds brought them back in but a month later they were lost again. Numerous internet searches and forum discussions revealed it to be a common problem but nothing suggested about set up or eq really did more than disguise the problem. It was solved when i bought a new bass, (MIA Jazz) the D and G are intrinsically punchier with everything from flats to Rotos and beyond. Eq the mids and tops and you get a nice balance. Same with my T-bird and P-bass. I swapped pickups on the Cort for Kent Armstrongs and that works well now, problem solved. If you are unhappy with this I doubt you'll tweak it out and I don't think it's the strings, though I'm sure some are better than others. Some basses and some pup's are good at this though.

If like me you are new to playing the blues there's a Hal Leonard book on blues bass which covers about a dozen blues standards, pretty much all the songs mentioned above. There's a play along CD too so you can make your mistakes in private. Most importantly it gives an explanation of 'from the five' or quick IV and the endless variations of the turnaround (last two bars). Most blues players kind of underplay how much knowledge they have, the music has a structure but infinite variations and if you've been playing it for years then you kind of forget having had to learn it. Don't undersell yourselves guys. Have fun

Thanks for this guys, I think I'll go for it. The AER will have to wait.

Thanks, I think from an earlier trawl that Doddy has the earlier MiBass with the semi parametric eq, since I use very little eq this shouldn't be a downer for my use.

If you are putting 500W into a single 15 unfiltered and probably with bass boost then there isn't really a speaker made that will cope long term. It says something good about the Peavey that it is still coping. Look inside and if it says Black Widow on the speaker it is a decent speaker. The Thumpinator is a great idea for a speaker abuser It removes the deep bass you can't really hear without affecting your sound much and you can crank further without damaging your speaker. It sounds like you need to get a second cab if this doesn't work. You are asking a lot of a cheap single 15. You can buy a second hand Peavey in a cab for £50-100. Less than the Kappa pro

I'm wondering about getting one of these as they are going cheap at the moment. I prefer an uncoloured sound. DI into the PA sounds fine to me but my bands prefer to have some bass on stage. Any one had any experiences with one of these?

[quote name='grenadilla' timestamp='1409178484' post='2537293'] I have a similar problem. I just bought a used Ashdown ABM 610 with one blown 'Blueline". I have found no replacements except Eminence Beta , Eminence Delta, or some newish BL 10-200X Celestion. I am leaning toward this 200w Celestion. The Ashdown speaker says "made in England 150 watts".This cabinet is sealed. Opinions or advice wanted... [/quote] Sealed cabs are much simpler and you are less likely to have a caastrophic result but mixing drivers in a cab isn't really going to be the best way of going ahead, internally they share the same air and externally they will 'share' the sound radiated and will probably make the cab sound a little blander or less characterful, although one speaker in six isn't going to make much difference.

[quote name='hogman' timestamp='1409162923' post='2537020'] I am currently having a veritable nightmare with my nemesis 2x10 and 1x15 cabs, there humble speakers dying, granted they have had a hard life. Got manufacturers replacement speakers that were both replaced by myself I am more than qualified to do this, I ran them in at low volume for 72 hours as I do with all my drivers. They have had very little hard use (compared to what they used to get I was gigging between 3 and 5 nights a week and out 4 - 5 a month now) and suffered no real abuse, I use an Ampeg SVT 3 and have since I bought the cabs. The speakers looked the same but are obviously not. Could you suggest a better quality speaker for the cabs (Eden Nemesis). To say I am disappointed is an understatement. The cabs have served me well for over about years ( being fed a diet from punk rock to Jazz and experimental playing) and I have replaced the 10's but not the 15 and was hoping to get a lot more out of them than 7 Months. Not to bothered about price n drivers is what I am after the cabs are a great size. The horns are a bit shouty. Any help would be ace! [/quote] You need to give us some help here, We need to know the internal volume of the cab or the internal measurements, if you know the thickness of the walls you can work it out from the external measurements or you can remove the speaker to get inside. We also need to know the size no and length of any ports.

Andertons have an offer on at the moment, the Mi12 is £199 [url="http://www.andertons.co.uk/bass-cabs/pid24233/cid686/ashdown-mibass-mi12-1x12-cab.asp"]http://www.andertons...12-1x12-cab.asp[/url] This might be the thread they are referring to [url="http://basschat.co.uk/topic/227904-1x12-cab-design-diary/"]http://basschat.co.u...b-design-diary/[/url] as usual it has drifted a little but there are enough details on there for you to go ahead and build one already and the final design will be ready soon, I promise [url="http://basschat.co.uk/topic/227904-1x12-cab-design-diary/"]http://basschat.co.u...b-design-diary/[/url] . If you ask on the thread I can put the dimensions back up. Someone ( 6V6) has already built a close 'version' of this [url="http://basschat.co.uk/topic/200152-1x12-diy-cab-build/page__hl__1x12"]http://basschat.co.u.../page__hl__1x12[/url] which will give you an independant view of how it might sound.