Oldman

Come complete with 'soft' hard case Sensible offers anyone?

Snaps: Slight wear on the rear edge [attachment=205925:Slight wear.JPG] No wear on the front edge [attachment=205926:No Wear.JPG] Easily removed Velcro Strips (I never bothered) Thanks

Small ding in lacquer approx 4mm x 5mm just up from the input socket, not visible when playing and unnoticed on exchange does not detract from the Bass in any way. [attachment=205924:Small 4X5mm Blemish.JPG] Absolutely no other marks Thanks for looking

[quote name='CamdenRob' timestamp='1448524805' post='2916057'] Wow... that is quite a looker [/quote] Thank you

Took this in a trade, works well, I'm not a pedal dancer after all, so I'd like to move it on for what it stands me. Signs of use but in excellent condition. Delivered to you. Snaps of the beast tomorrow It's the pretty one centre stage. [url="http://www.tech21nyc.com/products/sansamp/characterseries.html"]http://www.tech21nyc...cterseries.html[/url]

I could be interested in a part chop with an NSX 5 String upright or the NS CRM 5iver.

I came by this bass in a trade with Ziggy some months ago, tried it, easier than I thought to play, but I couldn't see me playing a 6ixer as my 'go to' Bass so I popped up to B/D to sell on their WWW. It was posted at £2,695.00, and consequently never sold. I pulled it back today to put it here at a realistic price, a price that reflects what the trade cost me. Some snaps, I'll measure the inevitable's and post them tomorrow: Hanging out with the Gang [attachment=205908:Hanging Around.JPG] Lower Front [attachment=205909:Lower Front.JPG] Most of the Board [attachment=205910:Most of the neck.JPG] Headstock [attachment=205911:Headstock.JPG] More snaps tomorrow, rear and a close up of a slight scuff. But otherwise an absolutely fine piece of Chris's Exhibition work Thanks for stoppin' by OH, it comes in an Industrial strength case

I have a Black, Passive, custom built 'P' Bass, Maple neck, Ebony board all black hardware. This was hand built for me by "Ou7shined", AKA Rich Lewis, AKA Osprey Guitars, up in Aberdeen 3 years ago, Rich has since dropped out of sight on this forum. Never gigged, just noodled on, I paid a lot of money for it then, for it just to look good on the wall. Looking Good on the wall: [attachment=205900:Tony front.JPG] And in the case: [attachment=205901:Tony Front in Case.jpg] Headstock front and back: [attachment=205902:Headstock Tony.JPG][attachment=205903:Tony headstock.JPG] Nut spacing is: 10mm Bridge Spacing is: 18mm I had the notion that Rich could build me a "Tony Franklin" Lookalike, it didn't turn out quite like that, but still looks and sounds lovely. Its a nice bass but surplus as I play a Fretless 5iver. Its a nice quality second fretless after you've learnt on your first not so expensive 'try out'. Prefer cash or maybe a part chop on something interesting to ease the acquisition pain

Your right, and more snaps: Front and rear with Manual; [attachment=205889:With Manual.JPG] [attachment=205892:Rear with Manual.JPG] In the 'Vented' Gig Bag [attachment=205890:Front in Gig Bag.JPG] [attachment=205891:Rear in Gig Bag.JPG] On an XS115 [attachment=205893:On XS115.JPG] Always used it protected in the Gig Bag, hence no marks. Thank for looking again

This is a feeler for my TecAmp Bonafide. Details ans spec's here [url="http://www.tecamp.de/en/products/amlification/6-bonafide.html#overview"]http://www.tecamp.de...e.html#overview[/url] This has been my main amp for the last 3 years gigged on an irregular basis maybe 20 outings and about the same rehearsals. Bought specifically to utilise the twin channel facility. At one time I had the switchable Bass Boost on channel B (+12db below 200Hz) through one cab and a chorus through the top cab for a superb sounding rig. Another feature which appealed to me is it's drop down to 2 Ohms making it an 8 cab rig (all 8 Ohm Speakers) should you require that firepower, I never used it but I did use 2 x 1 x 15's on channel B and a 10" on the high, completely off the wall for a small pub situation. But, as the man says, you can never move enough air.... An Old snap with the two Tecamp 15's (S115 and the XS115) [attachment=205870:Overwater Twins.JPG] Comes complete with a padded Gig Bag and the instruction manual. Up to date snaps available later tonight. Thanks for looking in

This is a bargain price for an NT custom bass, treat yourself. Class D in part chop to ease the pain

Bumperoonie

I have some TecAmp cabs, IMO, they are massively underrated, bump.

[quote name='LukeFRC' timestamp='1448002516' post='2912133'] i would concur - what are you doing?! [/quote] That's your starter Luke, kiss goodbye to the green goddess

Now then, further reduced, to £600.00, pick up preferred, but I will deliver within 50/60 Miles of Leicester. I travel to Liverpool on a Regular Basis so Merseyside, Cheshire most places North of Leicester without being silly can be accommodated within reason. This Cab is as NEW, used twice only............ Yes, I know about smaller, lighter, punchier, but this is a real earth mover and 8Ohms so you can indulge a two Cab "Massive" sound fantasy you've always wanted..... Guys its got to go, Class 'D' head to ease the acquisition pain no probs.. Thanks for looking

Bump, bag yersel' a Christmas bargain

REDUCED PRICE: £895.00. If you check out the Ruach www this specification would be circa £1,675.00. if I was playing, I would keep this as a back up, but no gigs no need. I'll part chop for a D class

Treat yersel' for Chrimbo, go on, you know you need that Low 'B'. Reduced to £625.00 Trades welcome WHY?

Bump, ideal for a residency, touring rig......

Bumped

New blues project will allow me to use this Bass for what was intended, getting close to a DB sound (debatable I know). Back n the fold thanks for looking, fretted still avaiable