Merton

I’m 95% sure there’s no tube at all, it’s just emulation; the spec sheets don’t make any reference to a valve type and normally you’d expect that to be shouted from the rooftops. Certainly the preamp pedal doesn’t, so I’d be surprised if they’d separately developed that without. Happy to be proven wrong though… I’m seriously toying with the idea of the 500W head and 212 cab as my new “big rig” for a new band….

Yep - Marmite peanut butter even says on the label “give me a stir” …and then heap it on fresh white toast 🤤

This is the food of kings, I love it 😎

No idea TBH. Ashdown still build their flagship amps and cabs in the UK and I suspect when Barefaced join the market they will too. But no idea about Laney…

New Andertons video: I must say they really have nailed the aesthetics for me, they look great. And sound great too to be fair

Certainly did 🙂

Looks bloody marvellous!

Definitely RMS

Yeah it’s still got pride of place in my little music room at home 😎

Just don’t boost the bass on it or you’ll fry everything and hurt your ears 🤓

Yup. Took a long time for one of my guitarist friends to realise that a lot of the balls from the guitar actually comes from NOT boosting the lows, and giving the bass clean space to work in. Works really well on rock stuff where the bass and rhythm guitar are tending to do similar things.

That EQ curve, along with the pre shape being set “on”, is emphasising the low end an awful lot. Increasing the gain will be causing your speakers grief and I expect, as @Downunderwonder said, it’s probably the 15” which is struggling.

Ah ok. How’s your EQ set? Possibly too much bottom end in the preamp causing it to clip as you increase the gain?

Exactly my thoughts. “Farty” is a term I associate with speakers going to their limits.

Excellent work 🙂

Not my experience at all. I'd say for rock/indie you won't go far wrong. It depends on your cabs, of course, but I felt the sound was beautifully fat and thick, and at volume whilst it would tip over the edge it was controllable. Perhaps depends how loud your band is too but I was playing with a very hard hitting drummer with my CTM100 and it was lovely and creamy and thick.

Ashdown CTM100 if you can find one. Superb amp

Ooooft lovely!

Welcome back! I too remember you

@Al Krow Peavey have said they’ll try to send me some specs later this week, if they’re allowed EDIT: got some very basic info I’m allowed to share 🤘🏻 Weight: 11.5 lbs (5.22 kg) Dimensions (H x W x D): 12.0”W x 12.0”D x 3.62”H (305mm x 305mm x 91.9mm) Protection: Over temperature, Over current, Clip limiting, Short circuit, DC output Power Output (THD+N 1%) Minimum load = 4 ohms Bridged output RMS Power, 4 Ohm load 1100W RMS Power, 8 Ohm load 835W Nominal Input Sensitivity: All EQ controls at 12:00, Compressors off, Shape off Gain at 12:00 = 1.4VRMS Gain Control Max, = 70mV RMS (not sure why some has pasted with yellow highlighting!)

Didn’t actually ask as I figured they’d hold it a closely guarded secret until the launch. I can of course try

Haha! Hopefully November this year according to the guy I asked

Launch is late August/early September so I guess we wait til then…

Looks that way. Official release late Aug/early Sept and available on these shores by November according to Trace (yes, I asked them 🤓)

Love it