Pow_22

[font=Calibri][size=3][color=#000000]Traynor YBA200 all valve bass amp.[/color][/size][/font] [font=Calibri][size=3][color=#000000]This has been professionally upgraded to the YBA200-2 specs by Mike Powell @ MPA Service following help from Darren Butt at Yorkville which bypasses the supposed self bias system that caused issues on several units. [/color][/size][size=3][color=#000000]Part of the upgrade also is to replace/upgrade the standard issue 6550’s with JJ KT88’s.[/color][/size][/font] [font=Calibri][size=3][color=#000000]The amp has never given me an ounce of trouble and, being quite rare for a valve amp as it uses a toroidal transformer – it weighs less than my old Ashdown ABM!.[/color][/size][/font] [font=Calibri][size=3][color=#000000]No dings, scuffs, knocks or bumps and comes with fitted Roqsolid dust cover.[/color][/size][/font] [font=Calibri][size=3][color=#000000]Now the difficult bit – describing the sound. [/color][/size][size=3][color=#000000]I play it through an Ampeg 410he with a flats loaded P bass.[/color][/size][size=3][color=#000000] [/color][/size][size=3][color=#000000]The sound is thick and meaty without being boomy (the Resonance control is excellent for that).[/color][/size][size=3][color=#000000] [/color][/size][size=3][color=#000000]It does break up when pushed and I play just on the edge of this.[/color][/size][size=3][color=#000000] [/color][/size][size=3][color=#000000]Never EVER ran out of headroom playing in medium sized clubs without PA support.[/color][/size][/font] [font=Calibri][size=3][color=#000000]The amp works with 8ohm or 4ohm cabs with its impedance selector switch.[/color][/size][/font] [font=Calibri][size=3][color=#000000]Im looking for [b][u]£500 [/u][/b][/color][/size][size=3][color=#000000]collected from Bolton (have it at a higher price on eBay) or could deliver within reasonable distance.[/color][/size][size=3][color=#000000] [/color][/size][size=3][color=#000000]Comes with the Roqsolid cover, 3mth old JJ KT88’s and given the overall great condition I think it’s a reasonable price for a light 200w all valve amp.[/color][/size][/font] [font=Calibri][size=3][color=#000000]Trials welcome.[/color][/size][/font] [font=Calibri][size=3][color=#000000]My Photobucket account is playing up so will need to email pics to any potential buyers. [/color][/size][size=3][color=#000000]We rehearse on a weds night around Bolton so more than welcome to bob over and hear it at a decent volume.[/color][/size][/font] [font=Calibri][size=3][color=#000000]Spec from Traynor:-[/color][/size][/font] Features: - 200 watt All-Tube Bass Amplifier - 4x KT88 power tubes, 2x 12AX7A and 1x 12AU7 preamp tubes - 3-band Master EQ with Range Control - Innovative Scoop and Resonance Controls - 1/4-inch Tuner Output with System Mute Switch - Switchable Pre/Post XLR D.I. Out with Ground Lift & 20dB Pad Technical specification: - Power @ min. impedance (Watts) 200 @ 4 or 8 (switchable) - Minimum Impedance (Ohms) 2 - Burst Power - 2 cycle 250 - Frequency Response (Hz +/-3dB) 30 - 16,000 - Hum and Noise (dB) -90dB - Channel 1 - Inputs 2 x 1/4inch @ 0dB & -6dB - Channel 1 - Controls Gain - Channel 1 - Switches Mute, Bright, Line Out Pre/Post-EQ Select - Master Volume Control Yes - Main Tone Controls Treble, Mid, Range (mid frequency), Bass, Scoop, Resonance - Line Out (type / configuration) XLR Balanced (Select Pre/Post, Grnd Lift) - Amp In Sensitivity 1V - Tube Complement 12AX7 x 2, 12AU7 x 1, KT88 x 4 - Dimensions (DWH, inches) 11.5 x 22.5 x 9.5 - Dimensions (DWH, cm) 29 x 57 x 24 - Weight (lbs / kg) 44/20

ALL GONE

Sold Pending

[font=Calibri][size=3][color=#000000]Strung on a P bass for all of 5mins but completely uncut so plenty of winds and will fit any 4 string bass.[/color][/size][/font] [font=Calibri][size=3][color=#000000]Nice tone but a little TOO Low tension for me (definitely not wet noodle TI’s tho)[/color][/size][/font] [font=Calibri][size=3][color=#000000]Come in original pack and price includes UK postage[/color][/size][/font]

ALL GONE

G - .045 D - .065 A - .085 E - .105

Just 1 set left

1 set gone

Got one of these spare as when I ordered a 4 string set they accidently sent me a 5er. Unused and still in original packet £5 delivered in UK

[font=Calibri][size=3][color=#000000]Ive got 3 x unopened sets of NOS Picato Flatwounds in original packs for sale.[/color][/size][/font] [list] [*]Long Scale [*][color=#000000]45-105[/color] [/list] [font=Calibri][size=3][color=#000000]Picato seemingly changed their formula a few years ago but these are the originals. [/color][/size][size=3][color=#000000]You can no longer get the 45-105 gauge that these NOS ones are, they added silk at both ends (these are completely unsilked) and they now seem a bit more modern sounding (these are proper old school dark thumpers).[/color][/size][/font] [font=Calibri][size=3][color=#000000]I have kept these in a sealed food bag with a pouch of silica gel in since I got them around 6mths ago so should be in good nick and ready to thump away.[/color][/size][/font] [font=Calibri][size=3][color=#000000]Looking for £15 per set and that will include delivery in UK. [/color][/size][size=3][color=#000000]If someone wants all three then I’m sure we could do a deal[/color][/size][/font]