Groove65

ok feedback from last nights pub gig - ran the head with a 212 and a 210 on top (standard config) played at a smidge over 1pm on the master volume. sounded fine and some of the regulars in the audience said the bass cut through ok (one of the guys is a sound engineer by trade anyway) so im a happy chap. the only thing i would recommend is to either put the amp on some sort of foam / carpet if you're putting it on top of the stack to stop any vibration going into the amp from the speakers.. either that or just pop it on a side table..

im running one with a RS212 and a RS210 - sounds absolutely brilliant to me. loaded up the tube drive toneprint with no loss in volume. we have a LOUD drummer and 2 guitarists and a singer that belts out as well - was running at under half on the volume knob and it sounded so sweet with my Jazz/Status neck combo... didnt seem to be struggling at all will be gigging the setup on 17th so will report back after - im not expecting it to be lacking in cutting through the mic

+1 on the tapatalk plugin - i use the app quite a lot and would much prefer to use Basschat on tapatalk Cheers all

Lol one thing i noticed in practise tonight was the lack of treble in the setup - seems the 410XL on its own with the BH250 is very mids biased... wonder if its because the XL410 doesnt have a horn in it ? loving the BH250 though - played it at 1/2 power for 2 hours and it wasnt even getting warm !! and the inbuilt tuner is a really nice feature

brilliant news chaps and many thanks for that !! really makes my life easier... looks like i'll be on the lookout for a 2x12 soon

Hi all, just picked up a TC BH250 head (lovely little thing !) and ive got a Hartke XL410 to run it through. the question i have is the XL410 is a 8 ohm cab with 2 jacks - 1 input and 1 'extension' does anyone know if the 'extension' is a parallel output ? ideally i want to run a couple of 8 ohm cabs off the one speakon jack on the back of the BH250 head (yes its only got the one speaker output) to give me a nice 4 ohm load total. my concern is that plugging another 8 ohm cab into the 'extension' on the back of the hartke is just going to result in a 16 ohm series load... thoughts ?? infact, does anyone know how to get a parallel config if you only have 1 speaker out on the amp head ?

[quote name='gafbass02' post='122334' date='Jan 17 2008, 05:44 PM']You know what as a long time bassworlder (chatter now) things like this really hurt me. I have had nothing ever but total utter dependability on here my 1st transaction through bassworld was a swap and a guy just sent me his bass through the post with me having sent nothing to him at all, just total trust, and id hate this place to end up full of 'new guys' (usually a good thing) or 'one offs' just taking the doodah. This is such a warm and unique community, id hate to loose it. Loves to you all! (aaah!)[/quote] Cheers mate - well its not bassworld's fault - we weren't to know this guy would conduct himself as he does when he joined so my faith in the site remains. ive bought other stuff from here and this is the very first time ive ever had any sort of issue. all the other things ive bought (bass or amp or effects) have been nothing but pleasureable experiences. anyway, ive just got to get a setup and strings and maybe some paint to cover up the worst of the chips and then i can try to enjoy it. I wouldnt try and sell it on to anyone else here as i'd just be passing on the problem knowingly and thats not my desire at all. just try and make the best of it i think. anyway, thanks to everyone for the kind words - really makes a difference y'know Iain