EBS_freak

And yet another one kills Rock n Roll.

Been talking with a friend that is desperately wanting a belt pack with a decent limiter. Came across this from whirlwind - which certainly looks pretty good... but a belt pack that requires an adapter? I suppose you could stick something like this in your pocket... and look like you are pleased to see somebody. I dunno. May work for somebody.. https://www.ebay.co.uk/p/24v-DC-Rechargeable-Li-ion-Battery-Pack-3000mah-Lithium-ion-With-UK-Charger/1939452313?iid=172104407748

Agreed. Bit like drum mics - any drum mics will do (within reason) - it just depends how much you want to faff with working the sound to the desired results. Other mics may get you there directly/quicker.

Nope. With the EQ and processing that they have at their finger tips, the source is becoming less important - you can compress, realm and EQ anything to fit in the mix... all the box now too.

But not for the NX32-A... which costs quite a pretty penny too

Try a Fender Twin as a starting point... and take the bias down and the master volume down so the "power amp" stays clean.

It works quite well on the NeoDrome as the EBS stuff is voiced quite hifi - mostly due to that Selenium tweeter in it. NeoDrome not too heavy either!

A valid point... but for me it's flexibility. I can use my FRFRs as FoH speakers. I can use them for backline. They are light. They are portable - certainly compared to the typical bass cabs out there that put out similar SPL... The important thing to remember that a FRFR does not automatically equate to a PA speaker. There are plenty of manufacturers that are doing FRFR cabs that look like guitar cabs. The problem is, not many of these are capable of delivering high SPL for bass... that simply wasn't their target market as the uptake of FRFR by bass players is a minute proportion of the market. The fact that a lot of modern PA speakers can handle a lot of bass makes them an idea candidate for use with bass. So yes, the cabinets of a lot of PA speakers, certainly the ABS cases, enable them to be pole mounted or placed on the floor so they can be used on their side as a wedge - and as you say, be used like a tilt back combo. The thing is, that tilt-back combo has a prebaked sound to it. The case for FRFR is that a modeller is placed before it, so that FRFR can reproduce the sound of the model without, unlike your generic tilt back combo, colouring the sound itself. OK, yes, we could use anything we wanted if we just needed "a sound" for monitoring purposes... but it would actually be nice to have the versatility to be able model different amps and actually like - no, love - what we hear coming out of the cab next to us on stage. Over time, our tastes may change, the gig may change... but a modeller with the FRFR solution caters for this perfectly. No prebaked cab sounds means we can get what we want on stage as well as out front. You may call it obsessive extremes - maybe it is - but a lot of people are clocking onto the fact that a decent modeller and FRFR opens up a whole world of flexibility. For me, the ultimate bonus is that I can take a modeller to a gig and a set of inears... so I use the FRFR aspect of the PA itself and I don't even need to take a cab onstage. It sounds a lot better out front too... as there is no bleed coming from the bass on the stage... Some people may call the whole thing overkill and say, meh, too much for a pub gig - but in reality, the benefits from quiet stages and loud PAs will realise the greatest improvement in a pub... where the stages are small and the venues are generally not built for music. So, if you were to get say a Helix LT - circa 690 quid... and a beefy FRFR speaker, say a 735... (oh look a bargain at Andertons) £580 for the Mk2... thats a ridiculous rig for £1270. When you compare what an average traditional rig costs.. say a Little Mark 800 circa 550 and Mark Bass NY122 circa 560 - £1110... I'd say that the £160 difference is a small price to pay for the flexibility of all those different amp models... and the comprehensive fx that is also available to you... and if you are also a guitarist... it will also cover all guitar rig needs (all amps, all pedals). Does it make a little more sense now?

Probably different speakers again - not all speakers are born equal. Big step up is it is RCF's entry into the wooden box offerings... whether it justifies that sort of price hike... well, thats a different argument!

Ah - the NX floor monitors - yeah, they are. Was thinking FoH speakers and couldn't think of one that fit the bill! Yeah, I'd like one of those!

Which ones? ART 732 - circa 730 quid each HD32a - circa 820 quid each 4PRO 2031-A - circa 770 each TT22As run about 2000 each

Actually, scrap that. Just get some stereo mic cable and put the relevant ends on directly! Braided, bit of heatshrink... job done.

How about using a 5 pin XLR lead. Make a Y split cable - the two ended side, one end with a XLR that goes to your Helix, one that goes to your Smooth Hound with 9v cannon adapter on end... and the other side, a 5 pin XLR (to plug into the long 5 pin XLR lead) Other end, is a similar break out... One into mixer, one connects to power adapter that sources it's power near the mixer. If you get my drift.

http://www.custom-inearmonitors.co.uk/reshells-remoulds/reshelling-remoulding-service-for-in-ear-monitors.html

@burno70 - I think the P2 drops Feb 2018... so not long now. It may be the case that wider Europe and US get it first though as that always seems to be the case - It may be worth watching the German shops... actually, https://www.musicstore.de/en_GB/GBP/Behringer-P2/art-PAH0019374-000 looks to be landing 1st week of Feb. I'd be temped to wait - or at least contact the above link and try and get one reserved. Yeah - the 215s will drive off an aux no problem I would have thought. If my 17ohm ACS will work off an aux, I'm sure that the 17Ohm 215s will be OK. Wireless - I would always recommend the Sennheiser EW300 G3 as the entry point into wireless IEM. I know others will disagree - but that's the cheapest radio system that I am happy with that I have experience of. I know others may disagree with that... but as I say, thats where my benchmark is. May be worth watching out for what Line 6 do at Namm... I've seen a couple of things mentioned but I don't think Line6 will open up that can of worms for themselves.... but I could be proven wrong.

Yup.

Yeah - interested!

As soon as you get to the last bit... the bit with a *... it could be anything and everything.

PS @jrixn1 - you b*stard! You're killing rock n roll (headnod to Interesting FRFR story)

A single 10 wouldn't be my choice either... but I guess if the OP is used to a single 10 from the BF, then maybe the single 10 RCF not a bad alternative. @largo - the redundancy of a second powered cab kinda appeals to me for 5kg. @jrixn1 - are you going straight from the zoom into the RCF? Or still using the Genz as a pre?

I remember us talking about the Mackie DX4 with @dood - I've revisited it following a conversation with a friend that is looking for a headphone amp but with some sort of decent compressor/limiter on it. I think we said that it was a little limited due to the lack of a pan function on each channel. Turns out that the line 3/4 on the DX4 (7/8 on the DX8) keeps the stereo input in stereo as far as I can see... so if you are using a mono mix, you can add ambient stereo mics, or if you are using a stereo mix, you can use one or two ambient mics but they would be summed to mono. I didn't really look into this before as soon as I saw the lack of pan controls, I kinda gave up on it. Should note that the DX stuff doesn't do phantom for condensers either. Anyway, with guys that are playing with other bands and all sorts of desks, I believe that this actually makes for quite a cool alternative to a headphone amp. As long as you get yourself a collection of connection cables... and a headphones extension cable, for circa 100 quid (assuming you already have the iPhone or android device needed to control it), this makes for quite a cool piece of kit. For example, plugging into an analogue desk aux is pretty naff - but this gives you the option of some EQ, some basic compression (compared to the other digital mixers out there) and some reverb to make things a little less dry. That's pretty cool in my book. As a backstory, the start of the investigation was actually doing the same with a UI12 or XR12 because believe it or not, there seems to be very little out there in terms of a headphone amp with some sort of compression/limiter (actually processing as opposed to a volume control limit). I think that if you can afford it, the UI12 or XR12 would be quite a cool addition to your arsenal... as it will give you some great options as opposed to doing your own processing and both are very portable... but again, a greater cost.

Hi - I think I've answered most of your queries in the post above. With regards to the P2 and running stereo from the XR18 auxes, you are going to be a pair of auxes short... so two of you are going to be in mono.

As you've noticed - the PM1 is completely passive and all it does is do a cut of the volume. How loud it can go depends on roughly two things - the amount that the aux from your desk can put out and whether it's loud enough to drive a pair of in ear monitors in the first place... and secondly the impedances of your in ear monitors. The lower the impedance that your in ear monitors are the easier they are to drive and generally the louder they will be. (I say generally as other factors including things like speaker sensitivity come into play also). Strictly speaking, you shouldn't drive your headphones directly from an aux - an aux should drive an amp which in turn then powers your in ear monitors (this also enables you to use higher impedance headphones at (again) generally louder volumes. You are correct that it would be one ear only - the PM1 is designed to come from a headphone amp, either mono or stereo. So for stereo, you'd plug typically use a TRS jack into the amp and on the end of that cable, you'd have an unbalanced XLR that has pin outs of L/R and ground. If you are using two auxes, you can use a Y cable and achieve the same in terms of managing the signal. If you are using the aux, you'd have to wire a cable to split the single signal to the two pins to give you the LR... or alternatively, if you could just use a 3.5mm mono to stereo adapter jack on the end or your in ear monitors. The P1 on the other hand, does have an amp built in... and also has a button that will switch a mono source to stereo in the ear (although it will be just the same audio in both left and right ears). So could be easier without the faffing of custom wires or adapters. Finally, the P2 is effectively the P1 with an amp built in... and has a mono/stereo switch inside, so again, no adapters or faffing on that front. In reality, out the 3, the P2 is probably the best all round option for your case.

Lovely pair!

Not 12s but can confirm that a pair of RCF 735 or 745s will see you through no problem.