Jump to content
Why become a member? ×

Bassdude BE

⭐Supporting Member⭐
 View Profile  See their activity

  • Posts

    658

  • Joined

  • Last visited

 Content Type 

Everything posted by Bassdude BE

  1. Bassdude BE
    Just sold a Genz Benz combo to Gareth, smooth deal, with great communication all the way, can't recommend him enough!
  2. Bassdude BE
    Hi BC'ers, I have an Aguilar TH350 that doesn't see any use atm, so I'm looking for a trade with a small, lightweight combo. (But will take cash as well ofcourse.. 😛 ) The head is just a couple months old and has only seen studio use, it's as good as new and comes with original packaging and papers. Looking for a lightweight combo with decent D.I. out, I'ld prefer a Markbass minimark 802, but will consider other lightweight 1x12, 2x8 and 2x10 combo's. Cash adjustment either way can be discussed. Note: I'm in Belgium, but shipping overseas is a lot cheaper, faster and easier than you might think. (check my feedback! )
  3. Bassdude BE
    PM'd!
  4. Bassdude BE
    Sold a Markbass combo to Illian, great coms, fast payment and a gent to deal with.
  5. Bassdude BE
    Hi Marco, you are more than welcome to come try her out in Ghent. Send me a PM when you would like to come by and then I'll give you my adress and phone number so we can arrange a meeting.
  6. Bassdude BE
    Hi bud, are you interested in trades ?
  7. Bassdude BE
    Boss LMB-3 now on hold pending payment. Woodchipper, Fuel tank and pedal board are still available.
  8. Bassdude BE
    *** VFE pedals Woodchipper (Hi end Maestro Brassmaster clone with build in opamp and dual mode switching!) - 130£ *** The WOODCHIPPER bass octave fuzz is derived from the classic Maestro Brassmaster circuit. In order to fit it all in a compact package, we sourced an expensive, military-spec audio transformer that delivers the same frequency response in a much smaller package. Next, we added a more flexible EQ section, and a unique BOTTOM control that adds clean low-bass that adds punch and fatness to the octave fuzz. http://vfepedals.com/woodchipper.html *** T-Rex Fuel Tank Classic - 70£ *** With 8x 9V/DC (not isolated), 1x 12V/DC (isolated) and 1x 12V/AC (isolated) outputs at either 110 or 230 Volt input Total output 1500 mA 3 Sections: 8x 9 V DC with max. 500 mA total, 1x12 V DC with 500 mA, 1x 12 V AC with 500 mA Included cables: 1x Mains Power cable 1x Red 50 cm DC cable with 2.1 - 2.5 mm 1x Black Link cable with 5x 2.1 - 2.1 mm plug 1x Black 50 cm DC cable with 2.1 mm DC - 3.5 mm mini jack plug 3x Black 50 cm DC cable with 2.1 - 2.1 mm plug 4x Black 20 cm DC cable with 2.1 - 2.1 mm plug on the Further Information DC/AC current AC/DC Output current in mA 1000 mA 9 V Yes 12 V Yes 18 V No Secondary voltage No Multi-output power supply Yes https://www.thomann.de/gb/trex_fuel_tank.htm… *** HB 40 pedalboard (complete,as new!) - SOLD! *** *** Boss LMB-3 Bass Limiter/Enhancer - SOLD!
  9. Bassdude BE
    *EDIT: I really need to free up some cash after blowing up my cab, so this must go now. I'm now open to trades with cheaper 4 and 5 string basses, fretted or lined fretless. I'm also looking for a compact and lightweight 112/208/210 cab or a compact and lightweight combo with D.I. out, W.h.Y.G.?
  10. Bassdude BE
    Sorry bud, I accidentally klicked the Enter button before the ad was finished, it is sorted now.
  11. Bassdude BE
    new topic made
  12. Bassdude BE
    - VFE pedals Mini Mu, Mutron III clone (Arduino!) => 120£ The MINI MU is derived from the classic Mutron III envelope filter (aka autowah), and has all the same great fat and funky filter sweeps inside a much smaller box. A few extras have been added, namely an active clean gain stage and an "in between" position on the range switch. With the included charge pump, the MINI MU runs on +/-9V like the original without needing a special power supply or two batteries. website: http://vfepedals.com/mini-mu.html Review with loads of soundclips: http://www.bass-pedals.com/vfe-pedals-mini-mu-sound-clips-1/ Pedal somes with original box, papers and goodies. Will consider a trade for a 3 Leaf Audio Wonderlove or Emma Discombobulator V2. (cash adjustment either way is possible)
  13. Bassdude BE
    The ultimate lightweight combo for upright and electric bass! (8.7kg, 300watt combo) These are no longer made and much sought-after as they are considered the "holy grail" amongst ultra light weight, compact, giggable combo's. This one comes with an Accucase gigbag which is a perfect fit for the combo. Bass on one shoulder, combo on the other and you're good to go! Only selling as I want to buy something a little bit bigger for gigs. I'm based in Belgium, but due to the weight shipping in EU will probably only cost 10£. http://www.genzbenz.com/?fa=detail&mid=2260&sid=56&cid=95
  14. Bassdude BE
    Here's some pictures including the gigbag and packaging. I've also added a picture without the ramp (last photo), so you can see how that looks like as well. Looking for 5 string trades (34", bolt on neck, lined fretless or fretted), but I might also be interested in a lighweight combo or cab/head as a partial trade. W.H.Y.G.?? In case of a straight sale EU/UK shipping is included in the asking price.
  15. Bassdude BE
    It truly is and those Nordstrand Zen Blades offer a wide variety of wonderful sounds. If I only could get along with the NT design and shorter body size (compared to my 5 string P) this would definitely be a keeper..
  16. Bassdude BE
    I've come to my senses and this is now no longer for sale!! website: https://mgbassguitars.com/?lang=en .
  17. Bassdude BE
    uurgh it says it's being held at customs since friday.. now starts the long wait.. 🙄
  18. Bassdude BE
    If you like Ti's , but would like just a little more tension then you should really check out the new Labella Low Tension Flexible flats. They're somewhere in between TI flats and a normal set of d'addario roundwounds when it comes to tension and they sound very, very good! Can't recommend them enough!
  19. Bassdude BE
    This one was sold to JuliusGroove here on the forum quite a while ago.
  20. Bassdude BE
    Shipping is 3-5 days, but it's customs services that usually causes the biggest delay, so I'm hoping for the best.. 😬
  21. Bassdude BE
    Thank you Eude, now starts the long wait for the delivery guy to show up with my bass.... aargh the horror!! 😛
  22. Bassdude BE
    She is finished! 😍 My dreambass made real by Maurício Costa @ MGbass Guitars. Many thanks to Mauricio who took this idea I had of my dreambass and succeeded in making it even better and more beautiful than I could ever have imagined. Mauricio, I will be forever grateful for you making this gorgeous instrument for me and I feel honoured that I can call you my friend. I can't wait to hit the stage with this beauty on my arm! 😎👌 #MGBass #Nordstrand #ZenBlades #Fretless When I was talking about this custom bass build by Mauricio a lot of people asked me why I didn't build my dreambass myself as I have been putting together affordable, but high quality parts basses myself for many years now.. My answer to that question was always the same, I simply said that "what Mauricio does is on a totally different level than anything that I could ever assemble myself, no matter how good the parts I use." "Mauricio is not just a luthier, Mauricio is an artist, he builds the entire instrument by hand and does it with so much passion and dedication that it becomes more than just a bass guitar, his instruments are a work of art, this bass will be a muse in it's own right that will keep on inspiring me until the day I die!" After receiving these pictures today I can only stand by those words with even more conviction, this bass is out of this world and I strongly advise all the bassists out there to check out his work as having Mauricio build your dreambass will probably be a lot cheaper than what you would expect when buying from such a talented and well known luthier! 👍 https://mgbassguitars.com/?lang=en I've just got these pictures today and she is on her way to me right now, I couldn't be more excited to be honest. it is my birthday today and just the thought that I will be able to play this beauty soon is enough of a present to me to make this the best birthday so far. Spec's are : - Brazilian olive wood top - Ash body - Maple/Wengé neck with Lined Ebony fret(less)board, - Nordstrand Zen Blade pickups (with custom made ramp) wired passive V/V/T - 18mm string spacing at the bridge Hope you enjoy the pictures!! 😍😍😍
  23. Bassdude BE
    Hi bud, I might be interested in the TKS cab, but would like some extra info tho.. Ist it a 15" or 18" speaker? 4Ohm or 8 Ohm? What's the wattage on this one? Kind regards, Donovan
  24. Bassdude BE
    I have a Markbass 12inch combo that I'm looking to sell, I'm going to put it up for sale tomorrow and if it sells before the genz benz does I'll have it... Allthough I'll probably be too late as these are cracking little combo's and it will not be around for long I guess.. I'd love this as a little busking set up tho. just put the battery pack underneath the combo on the trolley, bass and everything else in the gigbag and you're ready to hit the town with some funky grooves...
  25. Bassdude BE
    Hi Sam, I was just looking for the bass synth wah. Any idea if there is a big difference between the "synth wah" and the "bass synth wah" versions? Kind regards, Don
×
×
  • Create New...