DIY volume/loop pedal

[callingltu]

Hi guys,

I have one annoying pedal (digitech XBW) which doesnt have volume knob, and its signal is much higher then bypassed signal.
So i wanna make pedal like that:
[url="http://img339.imageshack.us/i/loopo.jpg/"][/url]

Uploaded with [url="http://imageshack.us"]ImageShack.us[/url]

How do i do that?
I cant find any schematics on web

Cheers

[Al Heeley]

If you are handy with a soldering iron you could wire in a resistor to the output socket to reduce the signal strength a little, not sure which value to start with though - may need some trial and error.. Maybe all that's needed is a mini 100k trimpot you could fit into the original enclosure then tweak with a screwdriver to match the output better. Simpler than a whole bypass pedal to knock a few dB off the signal.

[umph]

[quote name='Al Heeley' post='944544' date='Sep 3 2010, 01:52 PM']If you are handy with a soldering iron you could wire in a resistor to the output socket to reduce the signal strength a little, not sure which value to start with though - may need some trial and error.. Maybe all that's needed is a mini 100k trimpot you could fit into the original enclosure then tweak with a screwdriver to match the output better. Simpler than a whole bypass pedal to knock a few dB off the signal.[/quote]

+1 on this