Soledad Posted July 29, 2019 Share Posted July 29, 2019 23 hours ago, Paddy515 said: I find they give a really cutting tone. I boost mids to get heard through the mix. Did the same, a little mid-boost, backed off slightly on bass. To be fair it did cut through and sit nicely between kick and snare, but I wasn't getting the low top / crunch. It must be there, just passing through my legs!! I'll get a better sound check next weekend - sure I can get what I want from this rig. May end up with my Jazz and rounds... Quote Link to comment Share on other sites More sharing options...
Paddy515 Posted July 29, 2019 Share Posted July 29, 2019 Ive got cobalt flats one one bass and DR sunbeams on the other - use both pickups with the cobalts and just the bridge pickup with the sunbeams. Covers all bases. Quote Link to comment Share on other sites More sharing options...
Graham_C Posted August 6, 2019 Share Posted August 6, 2019 Oh, I went there! 5 2 Quote Link to comment Share on other sites More sharing options...
Passinwind Posted August 6, 2019 Share Posted August 6, 2019 Home practice rig: DIY 15/6/1 cab, DIY 600 watt head. 4 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 6, 2019 Share Posted August 6, 2019 Remind me, @Passinwind, did you do a build thread or similar for your amp? V intrigued by it Quote Link to comment Share on other sites More sharing options...
Passinwind Posted August 6, 2019 Share Posted August 6, 2019 12 minutes ago, Merton said: Remind me, @Passinwind, did you do a build thread or similar for your amp? V intrigued by it Here's some back story: https://www.talkbass.com/threads/a-diy-1-2-rack-bass-preamp.1135423/#post-16982343 And the earlier 500 watt one, which uses the same preamp boards: https://www.talkbass.com/threads/a-diy-500-watt-bass-head.1061473/#post-15624273 There are quite a few sound clips floating around on Facebook from NAMM in 2017 and 2018, when two different versions were in a luthier friend's booth. But I'm no longer on FB, so I suppose I should post them on my website or somewhere. But since I'm not selling them, it seems easier to just be a slacker! 1 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 8, 2019 Share Posted August 8, 2019 Ashdown RM800 EVO (thanks @Ashdown Engineering!) and two Barefaced One10s. This little rig is a killer combination 3 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted August 8, 2019 Share Posted August 8, 2019 1 minute ago, Merton said: Ashdown RM800 EVO (thanks @Ashdown Engineering!) and two Barefaced One10s. This little rig is a killer combination Love it, I’ve been looking at the RM 500 😁 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 8, 2019 Share Posted August 8, 2019 38 minutes ago, Reggaebass said: Love it, I’ve been looking at the RM 500 😁 They are great heads - do it! 1 Quote Link to comment Share on other sites More sharing options...
Linus27 Posted August 8, 2019 Share Posted August 8, 2019 (edited) 1 hour ago, Merton said: Ashdown RM800 EVO (thanks @Ashdown Engineering!) and two Barefaced One10s. This little rig is a killer combination Mmm, I've just bought a Barefaced Two10 and the RM 500 is one of the heads on my list to go with it 😊 Do you have a front on shot? Edited August 8, 2019 by Linus27 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted August 8, 2019 Share Posted August 8, 2019 27 minutes ago, Merton said: They are great heads - do it! Thanks Merton , I’m not copying you , honest 😁 1 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 8, 2019 Share Posted August 8, 2019 2 hours ago, Linus27 said: Mmm, I've just bought a Barefaced Two10 and the RM 500 is one of the heads on my list to go with it 😊 Do you have a front on shot? Sure I should probably rotate the cabs 90 degrees to give a layout more like the Two10 I guess - will sort tomorrow and PM you! 2 Quote Link to comment Share on other sites More sharing options...
Quilly Posted August 8, 2019 Share Posted August 8, 2019 Here’s some of my stuff (seen be Raggae bass already 🤣) 4 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 8, 2019 Share Posted August 8, 2019 Love the black bass on the left 1 Quote Link to comment Share on other sites More sharing options...
Quilly Posted August 8, 2019 Share Posted August 8, 2019 35 minutes ago, Merton said: Love the black bass on the left Bit of a rare beast. A 2008 Mayones Jabba4 passive . (No battery box) the switch runs the 2 pickups in series for extra oomph but I rarely use it. Sounds fab. 1 Quote Link to comment Share on other sites More sharing options...
Linus27 Posted August 8, 2019 Share Posted August 8, 2019 1 hour ago, Merton said: Sure I should probably rotate the cabs 90 degrees to give a layout more like the Two10 I guess - will sort tomorrow and PM you! Thank you. Your picture did confuse me as from my measurements, the RM head should not be so flush with the edge of the speaker on the Two10. Now I know why it is on yours 😁 1 Quote Link to comment Share on other sites More sharing options...
Clarky Posted August 9, 2019 Share Posted August 9, 2019 Finally happy (famous last words) with my electric rig. Mesa D800 plus EBS Valvedrive through Barefaced Two10. My upright/acoustic rig is an Acoustic Image Clarus 2R through Barefaced One10. 5 Quote Link to comment Share on other sites More sharing options...
rubis Posted August 9, 2019 Share Posted August 9, 2019 Very business-like...……………...what a beautiful bass 1 Quote Link to comment Share on other sites More sharing options...
rubis Posted August 9, 2019 Share Posted August 9, 2019 (edited) On 20/06/2019 at 11:42, Pea Turgh said: Superb! Very cool looking set up. This is lush Edited August 9, 2019 by rubis 1 Quote Link to comment Share on other sites More sharing options...
rubis Posted August 9, 2019 Share Posted August 9, 2019 On 19/04/2019 at 14:17, Stingray5 said: May still be old school but my Trace rig just keeps delivering.... GP12 SMX combo (1x15) + 2108X cab (2x10+2x5) + GT-6B At rest.... At play.... I once had a similar rig Stingray 5, an AH200-12 head with a 1x15 and the same 2x10 cab with the two little 5" drivers instead of a tweeter, what a nice, under rated cab it is, I liked it much better than any tweeter I have heard. 1 Quote Link to comment Share on other sites More sharing options...
Merton Posted August 10, 2019 Share Posted August 10, 2019 Gratuitous everything shot: 9 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted August 10, 2019 Share Posted August 10, 2019 38 minutes ago, Merton said: Gratuitous everything shot: 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted August 10, 2019 Share Posted August 10, 2019 1 hour ago, Merton said: Gratuitous everything shot: Yeah! This is what I like to see. Overkill! 2 Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted August 10, 2019 Share Posted August 10, 2019 2 hours ago, Merton said: Gratuitous everything shot: You need another cab now! Quote Link to comment Share on other sites More sharing options...
Merton Posted August 10, 2019 Share Posted August 10, 2019 56 minutes ago, Pea Turgh said: You need another cab now! I think so, at least one more 🤣 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.