Spikeh Posted September 16, 2010 Share Posted September 16, 2010 (edited) Hey yo, I fancy a change of head - had this baby for the past 5+ years and it's served me well. Fully serviced, PAT tested, tubes replaced regularly and gigged often! It's been used as a gig and studio rig - it's awesome head, very loud and plenty of different cab configurations / tone options. I've had it wired up to a multitude of cabinet types and it's sounded sweet as hell on every one. I couldn't really ask for anything better, but tbh, I just fancy a change. My metal band will soon be going on permanent hiatus due to our drummer making moves for another town, so I'm feeling a bit down in the dumps about the whole music thing and hoping some new toys to play with will perk me up Technical specs: RMS Power Output: 300-Watts x 2/900 (mono-bridged @ 8 Ohms) RMS Power Output: 490-Watts x 2/1200 (mono-bridged @ 4 Ohms) RMS Power Output (2 Ohms): 600-Watts x 2 Preamp: Tubes (3 x 12AX7) Power Amp: Solid State Tone Controls: 3-Band Mid Tone Control: 5-Position Graphic EQ: Yes, 9-Band Ultra Low/High Boosts: Yes Balanced Line Out: Yes x 2 Pre/Post with Level Effects Loop: Yes x 2 Preamp Out/Power Amp In: Yes x 2 Dimensions (W x H x D inches): 19 x 5.6 x 15.5 Weight: 39.5 Pounds Product Page: [url="http://www.ampeg.com/products/pro/svt4pro/"]http://www.ampeg.com/products/pro/svt4pro/[/url] Manual : [url="http://www.ampeg.com/pdf/SVT4PRO.pdf"]http://www.ampeg.com/pdf/SVT4PRO.pdf[/url] It obviously has a bit of rack rash, but otherwise it's in very good condition for its age and usage - all knobs and switches work fine without any kind of noise or interference. I'm at work so I have no picture right now, but I have plenty at home and will post later on. Looking for either £600 or a swap with a Gallien-Krueger 2001RB or a high-powered Mark Bass, though I would prefer the Gallien-Krueger. Edited September 16, 2010 by Spikeh Link to comment Share on other sites More sharing options...
StevieD_FenderP2009 Posted September 18, 2010 Share Posted September 18, 2010 Must... resist... taking... out... loan! Link to comment Share on other sites More sharing options...
MatthewKeys Posted September 19, 2010 Share Posted September 19, 2010 £600 posted? Link to comment Share on other sites More sharing options...
Spikeh Posted September 19, 2010 Author Share Posted September 19, 2010 [quote name='MatthewKeys' post='961461' date='Sep 19 2010, 07:33 PM']£600 posted?[/quote] No way - this thing weighs 40lb! Link to comment Share on other sites More sharing options...
MatthewKeys Posted September 25, 2010 Share Posted September 25, 2010 [quote name='Spikeh' post='961546' date='Sep 19 2010, 08:42 PM']No way - this thing weighs 40lb![/quote] that sucks, never mind then Link to comment Share on other sites More sharing options...
Bucket Head Posted September 25, 2010 Share Posted September 25, 2010 made in america? is that all u wnana trade or wud u consider anything else? Link to comment Share on other sites More sharing options...
Spikeh Posted September 26, 2010 Author Share Posted September 26, 2010 [quote name='Bucket Head' post='967986' date='Sep 25 2010, 09:26 PM']made in america? is that all u wnana trade or wud u consider anything else?[/quote] Didn't know they made them anywhere else? I'll get the serial and find out... Anyway, found a pic - attached! It's with my Ampeg SVT Ultra 8x10, which is also for sale (been using Schroeder's since last year ). Link to comment Share on other sites More sharing options...
Spikeh Posted September 26, 2010 Author Share Posted September 26, 2010 Forgot to press the "upload" button Link to comment Share on other sites More sharing options...
Spikeh Posted September 27, 2010 Author Share Posted September 27, 2010 So yeah, after a bit of research I would be happy to accept any of the following for trade: EDEN WT1205 GK 2001RB MarkBass SD1200 Basically I have two / three Schroeder cabs I intend to keep going - I need over 1000W bridged, ideally 1000W per side, though I'm fairly sure that's not going to happen! Link to comment Share on other sites More sharing options...
Bucket Head Posted September 29, 2010 Share Posted September 29, 2010 hmmm how much do u think postage would be on this? would collect but have no transport at all. also i know u wont want this but fancy a svt-3 pro made in america as a trade? cheers Link to comment Share on other sites More sharing options...
Spikeh Posted September 29, 2010 Author Share Posted September 29, 2010 [quote name='Bucket Head' post='971354' date='Sep 29 2010, 07:43 AM']hmmm how much do u think postage would be on this? would collect but have no transport at all. also i know u wont want this but fancy a svt-3 pro made in america as a trade? cheers[/quote] Nope, the SVT-3 isn't powerful enough for me unfortunately. I'm just looking to trade this now - unless someone wants to offer me a lot more money Link to comment Share on other sites More sharing options...
Recommended Posts