bassjamm Posted December 27, 2007 Share Posted December 27, 2007 Hi all, Just bought myself an Ampeg SVT-II (non-pro model). Never owned an amp with valves in, let alone one with valves in the pre and the power sections, and i've never had to use an amp tech...but figured i should source a good one that's local to me. I live in Grantham, Lincs. so if i could find one in this area it'd be a bonus, but anywhere in the East Mids would be great...Nottingham, Lincoln, Leicester, and Peterborough are all only about 30 mins away. I don't mind journeying further, the priority is based on finding a decent amp tech, not someone who has a rough idea! Thanks guys. Jamie Quote Link to comment Share on other sites More sharing options...
Hamster Posted December 27, 2007 Share Posted December 27, 2007 I'm assured this guy really knows his stuff - [url="http://www.chambonino.com/"]http://www.chambonino.com/[/url] in Nottingham Hamster Quote Link to comment Share on other sites More sharing options...
rodl2005 Posted December 27, 2007 Share Posted December 27, 2007 +1 i've spoken to him-email- & he's great & definately knows his tube stuff!!!! Tube amps- make sure to let warm up for at LEAST 2 mins before turning standby on. Same when turning off-some say not to worry when turning off, but I ALWAYS do & never've had a problem. - change POWER tubes every 10+ yrs not every year or so as some say. USUALLY only when YOU notice the sound deteriorating. My last tube amp-they lasted 15yrs+-being used at about 1/2-2/3 volume about 2x/week. with a SVT2 I don't imagine you'll EVER be pushing the volume so the tubes should last YEARS. PRE amp tubes last 20+ yrs!!!I've NEVER had to change mine EVER!!!! - as with ANY amp thats being used regularly & U want it to stay in top condition...get it serviced & the bias on the tubes checked every year or two. - MAKE SURE you have a load(speaker plugged in-correct impedance ;-) ) on amp whenever it's turned ON ALWAYS-or output transformer can be toast!!!!! Make sure your speaker leads are good quality & in GOOD CONDITION!! if one goes while playing it's the same as having NO load!!!!!!!!! - don't throw 'em round!!! :-) just handle them a little bit more carefully than S.State amps. Do these SIMPLE steps & a BEAUTIFUL thick valve tone willbe yours forever!!!!!!!! ENJOY! Quote Link to comment Share on other sites More sharing options...
bassjamm Posted December 27, 2007 Author Share Posted December 27, 2007 Thanks for that Hamster... And Rodl2005...some cracking advice there thank you!!! Quote Link to comment Share on other sites More sharing options...
Lee-Man Posted December 28, 2007 Share Posted December 28, 2007 Hey Jamie, hows it going? My amp guy is AMAZING, does wonders with my Aguilar valve set up, he's based in Milton Keynes, but well worth the visit. PM me if you want his details. Lee Quote Link to comment Share on other sites More sharing options...
Muppet Posted January 1, 2008 Share Posted January 1, 2008 Jamie, if you are prepared to go a bit further then Panic Music are located halfway between Huntingdon and Cambridge and they're an official (maybe the only one) Ampeg service and repair centre. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.