Thunderitter Posted October 8, 2010 Share Posted October 8, 2010 Asking price[b] $575[/b]. This bass is located in the USA. Trades - open to offers, but more inclined to sale. [u][b]Specifications:[/b][/u] [b]Model:[/b] “Stude” fretless, (I call this one 'Orange Thunder') [b]Serial:[/b] #1182 [b]Condition:[/b] Used, refinished [b]Truss Rod:[/b] no [b]Scale:[/b] 34” (2½+ octaves) [b]Body:[/b] Spalted Poplar [b]Neck:[/b] Five piece, through neck: Mahogany, Maple, Purpleheart [b]Fingerboard:[/b] Jatoba, 20” radius [b]Finish:[/b] Orange Stain. TruOil, hand rubbed; gloss [b]Pick-up:[/b] 2 x EMG Select Jazz [b]Controls:[/b] Vol. (push/pull series/parallel) and stacked Vol. and tone. Orange drop capacitor. Side jack input. [b]Bridge:[/b] Floating, Ebony [b]Nut:[/b] Ebony [b]Hardware:[/b] Black Schaller Strap rocks, String Ferrules, Tuners. [b]Strings:[/b] D’Addario Halfwound, through body. (45-100) [b]Weight:[/b] 6lbs 1oz (on my postal scale!) I'm looking to sell (or trade) one of my refinished and modified Wishbasses. (I've currently got 9). From its distinctive hand-shaped body, through neck and open headstock, this bass is designed to be earthy and organic, free from the normal metal (bridge, truss rod) of conventional bass guitars. I say 'refinished' because a standard Wishbass come with a very basic finish and set-up and I have invested considerable time with this bass to get it into the condition it is today. This has included re-contouring, re-shaping, filling and sanding as well as the final finish itself and adding and additional pick-up, electronics as well as string ferrules, black tuners and strap locks. A Wishbass like this one, custom ordered would cost you $445 (including shipping) from Wishbass, but of course that wouldn’t include a full refinish, new hardware and additional pick-up! You probably know a little about Wishbasses, some of the myths and also some of the upside! If you don't then I'd recommend that you do some research before you buy. The Wishbass Club on Talkbass is a good place to start for information. I have also posted build photos of this refinish at [url="http://www.davesbassplace.com"]www.davesbassplace.com[/url] (click on Refinishing). [b]Note:[/b] this is [u]not[/u] a production bass guitar, it is a one-off, hand-made bass; no two Wishbasses are alike! The body of the bass is Spalted Poplar with some great marking and figure. The five piece, though neck is African Mahogany, Maple and Purpleheart. The fretboard is Jatoba (Brazilian cherry) and has been leveled, radiussed (20”) smoothed, polished and finished with fingerboard oil. It has great grain and figure. The body has been reshaped, with the additional of a rear ‘belly curve’ and shaved down upper lower bout. The body and neck were stained orange before being sealed and a Tru-Oil hand rubbed finish applied (lots of coats!), polished with a final coat of finishing wax. The additional pick-up is a EMG Select Jazz. The pick-ups have been wired to be switchable between series and parallel via a push/pull knob on the neck Vol. pot. I’ve used a split pot for the bridge volume and overall tone control. Both cavities are shielded with copper tape and earthed. String through ferrules, Schaller strap-locks, black tuners, a custom made ebony nut and ebony bridge complete the additions to this bass. I’ve now refinished quite a few Wishbasses. The new owner of this bass will get a great bass without the requirement to devote any time, energy or skill to refinish it themselves. This is the chance to own a really nicely refinished bass and to do so at a great price. Anyway, I am sure someone is going to love this bass and for sure it will be a conversation starter piece wherever you take it! I've got a diverse range of guitars but my Wishbasses are always the ones people are drawn to first. The great thing about this bass is that it is very useable bass too! It could be a mainstream bass and it certainly plays and sounds like one! Please feel free to ask me any questions. Link to comment Share on other sites More sharing options...
Thunderitter Posted October 9, 2010 Author Share Posted October 9, 2010 Link to comment Share on other sites More sharing options...
Stacker Posted October 10, 2010 Share Posted October 10, 2010 I've heard that the necks on these fellas are really thick; is this true for this one? Link to comment Share on other sites More sharing options...
Thunderitter Posted October 11, 2010 Author Share Posted October 11, 2010 The necks vary quite a bit. The neck on this one is on the thinner side for a Wishbass neck - think Warwick. Link to comment Share on other sites More sharing options...
Thunderitter Posted October 17, 2010 Author Share Posted October 17, 2010 SOLD Link to comment Share on other sites More sharing options...
Recommended Posts